E
x
p
l
o
r
e
M
o
r
e
:
Electricity & Magnetism
Genecon Due 12 V and Genecon V3 3 V DC Hand Generators
From AUD 72.50 (Ex GST)
From AUD 72.50 (Ex GST)
- DC hand generators for physics and science education
- Available as Genecon Due 12 V DC hand generator
- Available as Genecon V3 3 V DC hand generator
- Designed for hands-on classroom electricity experiments
- Useful for demonstrating electron flow and simple circuit behaviour
- Supports series and parallel circuit demonstrations
- Suitable for bulb comparison, motor and generator activities
- Helps demonstrate transfer of energy and mechanical energy conversion
- Genecon V3 has maximum listed output of 3 V
- Genecon V3 size listed as 115 × 140 × 43 mm
- Genecon V3 is used with compatible Genecon V3 accessories
- Use under appropriate laboratory or educational supervision
[request_quote_button]
- Description
Description
The Genecon Due 12 V and Genecon V3 3 V DC Hand Generators, also known as classroom hand-cranked DC generators, are designed for practical physics, electricity and energy conversion demonstrations. These hand generators allow students to create electrical output by turning the handle, helping connect mechanical input with electrical energy output in a clear hands-on format. The Genecon Due 12 V DC Hand Generator is suitable for creating an interactive classroom learning environment when used with compatible accessories and approved experiment procedures. It can be used to demonstrate electron flow, series circuits, parallel circuits, comparison between bulbs, transfer of energy, motors, generators, mechanical energy and related electricity concepts.
The Genecon V3 3 V DC Hand Generator has a maximum listed output of 3 V and a listed size of 115 × 140 × 43 mm. The Genecon V3 is intended for use with compatible Genecon V3 accessories, supporting practical classroom activities involving low-voltage electricity and energy transfer. These products are suitable for school science laboratories, physics classrooms, university teaching laboratories and STEM education environments requiring practical apparatus for electricity, circuits and energy conversion experiments. Users should confirm the required generator model, voltage output, accessory compatibility, circuit load and experiment method before ordering or use.
Do not short-circuit the terminals or connect the generator to unsuitable electrical loads. Moving handles should be kept clear of fingers, hair, loose clothing and nearby equipment. This product range is intended for laboratory or educational settings only and should be used under appropriate teacher or laboratory supervision. This item is supplied as the selected Genecon DC hand generator only. Accessories, leads, bulbs, motors, switches, worksheets and additional circuit components are not included unless specified separately.
LabChoice Australia supplies Genecon DC Hand Generators for school science laboratories, physics classrooms, university teaching laboratories and STEM programs requiring practical equipment for electricity, circuits and energy transfer demonstrations.
Compact Low-Speed Micro Centrifuge for 2 mL, 1.5 mL and PCR Tubes, 7000 rpm
From AUD 224.50 (Ex GST)
Air Track Replacement Velcro Strips, 20 × 75 mm, 2 Pairs
AUD 4.90(Ex GST)
Red Rubber Pipette Filler Bulb, 3-Valve Silicone Type
AUD 20.00(Ex GST)
Hodson Light Box and Optical Set, 12 V
From AUD 190.50 (Ex GST)
Tube Adapter for Digital Vortex Mixer, 21 holes, Ø8mm (1.5-2mL)
AUD 44.50(Ex GST)
Top Cup for Digital Vortex Mixer
AUD 18.50(Ex GST)
LDPE Dropping Bottle, Lab Dropwise Dispensing Bottle with Screw Cap
From AUD 2.90 (Ex GST)
Chromatography Column with Fritted Disc, BORO 3.3 Glass
AUD 54.50(Ex GST)
You May Also Need
Centre Zero Student Meter for DC Current
From AUD 43.90 (Ex GST)
Centre Zero Student Volt Meter, Dual Range Galvanometer Type
AUD 43.90(Ex GST)
Centre Zero Student Volt Meters, DC Polarity Teaching Type
From AUD 43.90 (Ex GST)
Conductivity Electrodes, Stainless Steel Type
From AUD 49.90 (Ex GST)
Electron Charge-to-Mass Apparatus with Tube, Solenoid Not Included
AUD 232.90(Ex GST)
Electronics and Photonics Kit, Advanced Classroom Demonstration Kit
From AUD 46.50 (Ex GST)
Electronics Trainer Panels, Complete Electronics Study System
From AUD 376.90 (Ex GST)
Electrostatics Experiment Kits, Static Electricity Experiment Set
From AUD 72.50 (Ex GST)
Flat Plate Electrodes with Terminals, 75 × 25 × 3 mm
From AUD 9.50 (Ex GST)
Hand-Wound Motor/Generator Unit for U-Core Assemblies
AUD 214.50(Ex GST)
Key Press Contact Switch, Silver-Plated Contact Points
AUD 28.90(Ex GST)
Laboratory Electroscope in Metal Housing
From AUD 85.90 (Ex GST)
Moulded Helmholtz Coil Pair, 150 mm Diameter, With Feet and Ruler Included
AUD 226.90(Ex GST)
Tri-Mode Signal Generator, Power Supply and Amplifier
AUD 1,023.90(Ex GST)
Wimshurst Machine Spare Belts, Replacement Belt Set
From AUD 12.50 (Ex GST)
[porto_related_products_slider]
Recently Viewed Products
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Reagent Bottles, Wide Mouth, HDPE, Chemical-Resistant, Highly Reliable & Durable - Each
From AUD 1.50 (Ex GST)
Petri Dishes, Polypropylene, Autoclavable & Reusable, High Quality
From AUD 1.20 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From AUD 3.90 (Ex GST)
TOP RATED PRODUCTS
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab