E
x
p
l
o
r
e
M
o
r
e
:
Electrochemistry Meters & Analysers
pH Electrode 201DJ-C Double-Junction for Turbid Water Solutions, 0 to 13 pH
AUD 95.00(Ex GST)
AUD 95.00(Ex GST)
- Double-junction pH electrode suitable for turbid and complex water-solution testing
- Practical choice for wastewater, pools, hydroponics and environmental monitoring applications
- Designed to help reduce junction clogging during routine testing in less-clean water samples
- Suitable as a replacement or spare electrode for compatible pH meters using BNC connection
- Useful for laboratories needing longer service life than a standard single-junction pH electrode
- Not suitable for low-ion water, strong acids, strong bases, corrosive liquids or continuous high-temperature testing
[request_quote_button]
- Description
- Datasheets & Manuals
Description
pH Electrode 201DJ-C Double-Junction for Turbid Water Solutions is designed for pH measurement in routine water-testing workflows where samples may contain suspended matter, contaminants or more complex chemistry than clean general water. The double-junction structure helps reduce the chance of junction blockage during use. This makes it a practical electrode option for wastewater, pool water, hydroponic nutrient solutions, environmental monitoring and similar water-testing applications.
The electrode uses a lithium glass pH membrane to support stable pH response in suitable aqueous samples. Its PC body and 3 ft cable provide a practical setup for connection to compatible handheld, portable or benchtop pH meters. This model uses a standard BNC connector and can be used with pH meters that accept BNC electrodes. It does not include a built-in temperature sensor, so temperature compensation must be handled with a separate temperature probe or by manual temperature input on the meter.
This electrode should not be used for deionised water, distilled water, strong base solutions above pH 12.00, strong acid solutions below pH 2.00, highly corrosive samples or continuous high-temperature testing.
LabChoice Australia supplies double-junction pH electrodes for laboratories, schools, environmental testing, water treatment, hydroponics, pool testing and routine quality-control pH measurement workflows.
Features
- Model: 201DJ-C Double-Junction pH Electrode
- Electrode type: Combination pH electrode
- Junction type: Double-junction structure
- Measuring range: 0 to 13 pH
- Temperature range: 0 to 60°C / 32 to 140°F
- Body material: PC body
- Cable length: 3 ft
- Connector type: BNC connector
- pH membrane: Proprietary lithium glass membrane
- Temperature sensor: Not built in
- ATC requirement: Separate temperature probe required for ATC, or manual temperature input required
- Suitable sample type: Turbid and complex water solutions
Warranty
This electrode is supplied with a 6-month warranty against defects in material and workmanship, subject to the supplier warranty terms. The warranty does not cover accidental damage, improper use, normal wear and tear, transport damage, incorrect storage, failure to follow product instructions, unauthorised repair or external causes beyond normal product use.
| Specification | Details |
|---|---|
| Range | 0 to 13 pH, 0 to 60˚C (32 to 140˚F) |
| Housing | Polycarbonate |
| Junction | Double-junction |
| Reference electrode | Ag/AgCl |
| Reference solution | Gel KCL |
| Connector | BNC |
| Cable length | 3 Ft |
| Dimension | ø12*160 mm |
| Temperature sensor | N/A |
Datasheets & Manuals
Document :
Product Information Sheet(Pdf)
Rocks in a Bag, Classroom Geology Specimen Sets
From AUD 27.50 (Ex GST)
Microcentrifuge Tube, Polypropylene, Sterile
From AUD 356.50 (Ex GST)
Air Track Glider Weight and Screw, 200 mm Compensating
AUD 11.90(Ex GST)
pH Electrode Standard Sleeve Glass, 3-in-1 Glass Body, 1 m Cable
AUD 595.00(Ex GST)
Adam Luna LTB/LBB Toploading Precision Balances for Lab Weighing
From AUD 1,485.00 (Ex GST)
Genecon Due 12 V and Genecon V3 3 V DC Hand Generators
From AUD 72.50 (Ex GST)
You May Also Need
Save 10%
Benchtop Classical Series Multi-Parameter Meter for pH, Conductivity and DO Testing
From AUD 2,467.50 (Ex GST)
Save 10%
Benchtop Touch Screen Multi-Parameter Meter for pH and Conductivity Testing
From AUD 3,146.90 (Ex GST)
Constant-Current Capacitor Charging Apparatus with Power Supply
AUD 126.90(Ex GST)
Fluoride Sensor, Replacement Sensor with 0.3 mL Direct Measurement
AUD 227.70(Ex GST)
Pocket Ionized Calcium Meter, Cow Side Blood Testing with 0.3 mL Sample Volume
AUD 2,183.50(Ex GST)
Pocket Nitrate Ion Meter, 0.3 mL Sample Testing with Up to 2 Calibration Points
AUD 1,314.50(Ex GST)
Pocket Nitrate Ion Meter, Single-Drop On-Site Testing
AUD 764.50(Ex GST)
Save 10%
Pocket Testers for Portable Water Quality Testing
From AUD 290.50 (Ex GST)
Save 10%
Portable Single Parameters for pH, ORP, Conductivity and DO Testing
From AUD 1,435.50 (Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Petri Dishes, Polypropylene, Autoclavable & Reusable, High Quality
From AUD 1.20 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From AUD 3.90 (Ex GST)
Laboratory Beaker, Low Form, Graduated with Spout, Borosilicate Glass (BORO 3.3)
From AUD 2.00 (Ex GST)
LATEST PRODUCTS
ORP Electrode 301Pt-C Combination with Platinum Ring
AUD 165.00(Ex GST)
Temperature Probe MP500 with RCA Connector for Apera Meters, -10 to 110°C
AUD 110.00(Ex GST)
TOP RATED PRODUCTS
ORP Electrode 301Pt-C Combination with Platinum Ring
AUD 165.00(Ex GST)
Temperature Probe MP500 with RCA Connector for Apera Meters, -10 to 110°C
AUD 110.00(Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab