E
x
p
l
o
r
e
M
o
r
e
:
Electrochemistry Meters & Analysers
Ammonia Ion Selective Electrode Kit, Combination, 1 m Cable
AUD 1,475.00(Ex GST)
AUD 1,475.00(Ex GST)
- Combination ammonia ion selective electrode kit for ammonia / ammonium ion measurement workflows
- Supplied with 3 spare membrane caps for compatible electrode maintenance
- Includes 50 mL each of filling solution, 100 ppm standard and 1000 ppm standard solution
- Includes syringe, disposable dropper, protective pipe and manual
- 1 m cable with BNC connection compatibility for suitable pH / ION meters
- ISAB sodium hydroxide requirement and fixed-temperature measurement conditions should be confirmed before use
[request_quote_button]
- Description
- Datasheets & Manuals
Description
Ammonia Ion Selective Electrode Kit, Combination, 1 m Cable, also known as an ammonia ISE kit, is designed for laboratories that need to measure ammonia or ammonium-related ion concentration using a compatible pH / ION meter. This kit is suitable for water-quality testing, environmental monitoring, research, education and laboratory sample analysis where ion-selective measurement is required instead of a general pH reading. It supports applications where users need a dedicated electrode system for targeted ammonia-related testing.
Included with this Ammonia Ion Selective Electrode Kit: Filling Solution, 100 ppm Calibration Solution, 1000 ppm Calibration Solution and 3 Membranes.
Suitable for pH / ION Meters: This ammonia ISE kit is designed for use with compatible pH / ION meters for ammonia or ammonium ion measurement workflows.
Ion selective electrodes respond to the activity of specific ions in the test liquid and are used with compatible meter systems to produce concentration-based readings after calibration. Proper calibration practice is important because the meter response depends on the selected standards, sample condition and measurement method. Users should keep measurement conditions consistent, especially temperature, because ion detection behaviour can vary with temperature changes. Sample preparation, calibration sequence, electrode filling, membrane condition and ionic strength adjustment should be managed according to the test method.
Note: Ammonia electrode use requires ionic strength adjusting buffer, listed as ISAB sodium hydroxide in the supplied product information. Please confirm the required ISAB solution, sample preparation method and compatible meter setup before ordering.
LabChoice Australia supplies Ammonia Ion Selective Electrode Kits for schools, universities, environmental testing laboratories, water-quality teams and research facilities requiring ammonia-related ion measurement using compatible pH / ION meter systems.
Features
- Ammonia NH3 ion selective electrode kit
- Combination ion selective electrode format
- 1 m cable included
- BNC connector included
- Suitable for compatible pH / ION meters
- Includes membrane cap, 3 pcs
- Includes 1000 mg/L ammonium ion standard solution, 50 mL
- Includes 100 mg/L ammonium ion standard solution, 50 mL
- Includes ammonia electrode filling solution, 50 mL
- Includes syringe
- Includes disposable dropper
- Includes protective pipe
- Includes manual
- Used with standard solutions for direct ion concentration readings on compatible ion meters
- Measurement temperature should be kept consistent because detection level can change with temperature
- ISAB sodium hydroxide requirement should be checked before ordering or operation
| Specification | Details |
|---|---|
| MODEL | 5002S-10C |
| Measurement Range | 0.1 – 1,000 mg/L NH3 |
| Temperature Range | 0 – 50°C |
| pH Range | ≥ pH 12 |
| Accuracy | ±2% |
| Internal Electrode | Ag/AgCl |
| Internal Solution | 0.1 mol/L NH4Cl |
| Liquid Junction | Movable sleeve |
| Connector & Cable Length | BNC, 1m |
| Dimensions | 161mm (length), 15mm (diameter) |
| Wetted Part Materials | PTFE, PVC, PSU |
| Package Contents | 3 pcs. Membrane Caps 1000 mg/L Ammonium Ion Standard Solution (50ml) 100 mg/L Ammonium Ion Standard Solution (50ml) Ammonia Electrode Filling Solution (50ml) Syringe Dropper Manual |
| Accessories and Solutions | |
| NH3 Electrode Membrane Caps | Ammonia Electrode Tips |
| 500-NH3-IFS | Ammonia Electrode Filling Solution (500ml) |
| 500-NH4-SL | 100 mg/L Ammonium Ion Standard Solution (500ml) |
| 500-NH4-SH | 1000 mg/L Ammonium Ion Standard Solution (500ml) |
Datasheets & Manuals
Document :
Product Information Sheet(Pdf)
flask clamps CO₂ Orbital Shaker Accessory Pack
AUD 703.90(Ex GST)
Amber Glass Vacuum Desiccator with Lid
From AUD 554.90 (Ex GST)
Diffraction Grating Card, Classroom Spectrum Comparison Holder
AUD 68.50(Ex GST)
Pocket Thermometers, Portable Pen Style Temperature Measurement Range
From AUD 22.50 (Ex GST)
Dual Range Analog DC Voltmeter for Student Experiments
From AUD 43.90 (Ex GST)
Daniell Cell Experiment Kit
AUD 236.90(Ex GST)
You May Also Need
Save 10%
Benchtop Touch Screen Multi-Parameter Meter for pH and Conductivity Testing
From AUD 3,146.90 (Ex GST)
Calcium Ion Sensor, Replacement Sensor with 0.1 to 5.0 mmol/L Range
AUD 528.00(Ex GST)
Nitrate Ion Electrode, Replacement Sensor with Selective Flat Electrode
AUD 227.70(Ex GST)
Pocket Ionized Calcium Meter, Cow Side Blood Testing with 0.3 mL Sample Volume
AUD 2,183.50(Ex GST)
Pocket ORP and Eh Meter, 0.3 mL Sample Testing with Backlit LCD
AUD 478.50(Ex GST)
Save 10%
Pocket Testers for Portable Water Quality Testing
From AUD 290.50 (Ex GST)
Save 10%
Portable Multi-Parameter Meters for pH, Conductivity and Dissolved Oxygen Testing
From AUD 1,723.50 (Ex GST)
Potassium Ion Sensor, Replacement Sensor with 4 to 9900 ppm Range
AUD 227.70(Ex GST)
Salt EC Sensor, 0.12 mL Sample Testing with Ti/Pt Black Cell
AUD 143.00(Ex GST)
Salt Electrode, Replacement Sensor with 0.01 to 25% Salt Range
AUD 227.70(Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Petri Dishes, Polypropylene, Autoclavable & Reusable, High Quality
From AUD 1.20 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From AUD 3.90 (Ex GST)
Reagent Bottles, Wide Mouth, HDPE, Chemical-Resistant, Highly Reliable & Durable - Each
From AUD 1.50 (Ex GST)
LATEST PRODUCTS
TOP RATED PRODUCTS
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab