E
x
p
l
o
r
e
M
o
r
e
:
Parts & Accessories
Air Track Tape Measure, Fibreglass, 3 m Long
AUD 6.50(Ex GST)
AUD 6.50(Ex GST)
- Tape measure accessory for compatible air track systems
- 3 m long fibreglass tape measure
- Width listed as 16 mm
- Designed to fit the slot in the edge of the air tube
- Can be cut to the required length during installation
- Useful for position, distance and displacement measurements
- Suitable for motion, velocity and acceleration experiments
- Practical spare or replacement scale for air track setups
- Suitable for school, university and teaching laboratory use
- Confirm air tube slot size and required length before ordering
- Tape measure only, air track is not included
- Use under appropriate laboratory or educational supervision
[request_quote_button]
- Description
Description
The Air Track Tape Measure, Fibreglass, 3 m Long, also known as an air track measuring scale, is designed for compatible air track systems used in physics and mechanics experiments. This tape measure is made from fibreglass and has a listed length of 3 m with a width of 16 mm. It is designed to fit into the slot along the edge of a compatible air tube, supporting practical measurement of position, distance and displacement during approved classroom activities. The tape can be cut to the required length, allowing users to fit it to the appropriate air track or air tube setup.
This accessory is useful for experiments involving linear motion, velocity, acceleration, glider position, timing measurements and collision investigations. Users should confirm the air track model, air tube slot size, tape width, required cut length and installation method before ordering or use. The tape measure should be installed securely and aligned correctly before the air track is used. Do not use if the tape is loose, damaged, unreadable or incorrectly fitted. Take care when cutting the tape to length. Use suitable tools and follow approved workshop or laboratory procedures to avoid sharp edges or inaccurate installation.
This product is intended for laboratory or educational settings only and should be used under appropriate teacher or laboratory supervision. This item is supplied as the 3 m fibreglass air track tape measure only. Air track, air tube, sub base, blower, gliders, timers, photogates, cables and additional air track accessories are not included unless specified separately.
LabChoice Australia supplies Air Track Tape Measures and spare parts for school science laboratories, physics classrooms, university teaching laboratories and STEM programs requiring practical components for air track motion experiments.
Melting Point Capillary Tubes, Melting Point Determination - Pack of 100 Pcs
From AUD 7.50 (Ex GST)
Magnetic Field, Cavity Type with Iron Bars, 200 x 100mm
AUD 17.50(Ex GST)
Pond Sampling Kit, Water Specimen Collection Set with Dippers and Tubes
AUD 80.90(Ex GST)
PSSC Inertial Balance Experiment Kit
AUD 77.50(Ex GST)
Rubber Stoppers, One Hole Laboratory Sealing Range
From AUD 6.50 (Ex GST)
NaCl Standard Solution, 0.5% Calibration for Pocket Salt Meters
AUD 91.30(Ex GST)
Screw Cap Tube, Non Sterile - Pack of 5000 Pcs
From AUD 930.50 (Ex GST)
Soda Glass Tubing, Flint Glass Tube Lengths for Laboratory Use
From AUD 19.90 (Ex GST)
Cast Iron Bar Breaker Rods, Pack of 10
AUD 15.90(Ex GST)
U-Shaped Drying Tube with Side Arms and Shut-Off Valves, BORO 3.3 Glass
AUD 34.90(Ex GST)
You May Also Need
Air Table Pucks, Complete with Weights
From AUD 38.50 (Ex GST)
Air Table, Dynamics and Kinematics Model
From AUD 4.50 (Ex GST)
Air Track Foot Support for Spark and Paper Tracks
AUD 13.90(Ex GST)
Air Track Non-Elastic Velcro Buffer Pair
AUD 12.50(Ex GST)
Air Track Over-Track Photogate with Leg Supports
AUD 170.50(Ex GST)
Air Track Plastic Inclination Block Set (4 Pieces)
AUD 8.90(Ex GST)
Air Track Spark Paper, Motion Recording Roll Black and White
From AUD 18.50 (Ex GST)
Air Track Springs, Laboratory Motion Accessory Type
From AUD 4.90 (Ex GST)
Air Track Stop Block for Track Systems
From AUD 2.90 (Ex GST)
Alligator Clips, 4 mm Banana Plug Shank, Pack of 10
From AUD 15.90 (Ex GST)
Banana Plugs, 4mm Laboratory Type
From AUD 14.50 (Ex GST)
Boyle’s Law Apparatus Parts and Spares
From AUD 13.50 (Ex GST)
Boyle’s Law Glass Tubes, Laboratory Demonstration Tube Set
From AUD 21.90 (Ex GST)
Hoffman Screw Tubing Clips, Adjustable Pinch Clamp for Flexible Tubing
From AUD 6.90 (Ex GST)
Pack of 4 Blue D-Cell Battery Holders for Series or Parallel Connections
AUD 13.90(Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From AUD 3.90 (Ex GST)
Reagent Bottles, Wide Mouth, HDPE, Chemical-Resistant, Highly Reliable & Durable - Each
From AUD 1.50 (Ex GST)
Petri Dishes, Polypropylene, Autoclavable & Reusable, High Quality
From AUD 1.20 (Ex GST)
LATEST PRODUCTS
Air Track Magnet for Glider, Alnico, 50 g
AUD 13.90(Ex GST)
Air Track Buffer Spring, Stainless Steel, with Screw
AUD 10.50(Ex GST)
Air Track Spark Pen Pair, Left and Right Hand
AUD 38.50(Ex GST)
TOP RATED PRODUCTS
Air Track Magnet for Glider, Alnico, 50 g
AUD 13.90(Ex GST)
Air Track Buffer Spring, Stainless Steel, with Screw
AUD 10.50(Ex GST)
Air Track Spark Pen Pair, Left and Right Hand
AUD 38.50(Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab