E
x
p
l
o
r
e
M
o
r
e
:
Heat & Light
Calorimeter Cup Pair, Inner and Outer with Lid and Stirrer
$114.90(Ex GST)
$114.90(Ex GST)
- Calorimeter cup pair for water-based heat transfer experiments
- Includes outer cup, inner cup, plastic lid and stirrer
- Outer cup dimensions listed as 75 × 100 mm, diameter × height
- Inner calorimeter cup dimensions listed as 50 × 75 mm, diameter × height
- Styrene foam insulation pad helps support and centralise the inner cup
- Single plastic lid holds both cups aligned during use
- Centre lid hole allows thermometer insertion
- Stirrer operates with vertical action inside the smaller cup
- Designed to be used with water only
[request_quote_button]
- Description
- Datasheets & Manuals
Description
The Calorimeter Cup Pair, Inner and Outer with Lid and Stirrer, also known as a double-cup laboratory calorimeter, is designed for simple water-based calorimetry experiments in school and teaching laboratory environments. The set includes an outer cup and an inner calorimeter cup arranged so that the mouths of both cups sit level. This allows the supplied plastic lid to engage both cups and help keep the inner and outer cup aligned during use. The outer cup measures 75 × 100 mm, diameter × height, while the inner calorimeter cup measures 50 × 75 mm, diameter × height. The size arrangement allows the inner cup to sit inside the larger outer cup for insulated water-based experimental work.
A styrene foam insulation pad is positioned at the bottom of the outer cup. This helps support and centralise the inner calorimeter cup, reducing direct contact and supporting more consistent classroom calorimetry setup. The supplied plastic lid includes a centre hole for thermometer insertion. This allows students or laboratory users to monitor water temperature during compatible heat transfer or calorimetry demonstrations. The stirrer is designed to operate with a vertical action inside the smaller inner cup without touching the thermometer. This supports gentle mixing of water during temperature measurement, helping improve uniformity during suitable experiments.
This calorimeter cup pair is designed to be used with water only. It should not be used with corrosive chemicals, flammable liquids, oils, solvents or high-temperature materials unless suitability has been formally confirmed by the laboratory supervisor. This item is supplied as the calorimeter cup pair with lid and stirrer only. Thermometer, water, chemicals, heat source and any additional laboratory accessories are not included unless specified separately.
LabChoice Australia supplies Calorimeter Cup for school science laboratories, chemistry teaching spaces, physics classrooms and general education laboratories requiring practical equipment for water-based heat transfer and calorimetry experiments.
Datasheets & Manuals
Document :
Product Information Sheet(Pdf)
Tri-Mode Signal Generator, Power Supply and Amplifier
$1,023.90(Ex GST)
Calcium Ion Standard Solution, 150 ppm Calibration Solution
$110.00(Ex GST)
Long Deck Double Layer Rocking Tube Rotator Brushless DC Motor
$612.50(Ex GST)
Steel Balls, Precision Laboratory Grade
From $50.90 (Ex GST)
PETG Erlenmeyer Flask Baffled Bottom, Sterile
From $81.50 (Ex GST)
Chattaway Stainless Steel Laboratory Spatula with Straight and Bent Ends, Each
From $4.90 (Ex GST)
Adam CBX Compact Balances, Rechargeable Type
From $175.00 (Ex GST)
Digital Timers, Jumbo Display Countdown and Stopwatch Range
From $32.50 (Ex GST)
You May Also Need
3-Piece 90° Corner Mirror Set, 120 mm Side Length
$22.50(Ex GST)
Calorimeter Heating Blocks, Educational Metal Block Set for Heat Studies
From $62.50 (Ex GST)
Conductometer Heat Conduction Apparatus
$24.90(Ex GST)
Convection in Air Apparatus- Mine Shaft Apparatus
$72.50(Ex GST)
Copper Calorimeter Cups, Nickel Plated, 50 × 75 mm and 75 × 100 mm
From $26.50 (Ex GST)
Gravesande’s Ball and Ring Apparatus, Brass Set
$39.90(Ex GST)
Hodson Optical Bench and Lens Kit
From $247.90 (Ex GST)
Holographic Diffraction Gratings
From $12.50 (Ex GST)
Laboratory Light Sources
From $12.50 (Ex GST)
Laser View Prism and Bar Kits
From $103.50 (Ex GST)
Lens and Mirror Holders and Lens Paper
From $6.90 (Ex GST)
Simple Copper–Constantan Thermocouple, 200 mm Length
$9.90(Ex GST)
Spectrum Tube EHV Unit and Tube Support, Without Tubes
$422.50(Ex GST)
Two Metal Laminated Strip Compound Bar
$16.50(Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From $3.90 (Ex GST)
Polypropylene Filter Funnels, 50 mm to 150 mm Range
From $1.50 (Ex GST)
LATEST PRODUCTS
Pocket Twin Folding Magnifier, 6x + 6x, 12x
$6.90(Ex GST)
Folding Linen Tester Magnifier, 5.5×, 30 mm
$12.50(Ex GST)
Joule’s Calorimeter Assembly with 2 Ohm Heating Coil
$69.90(Ex GST)
TOP RATED PRODUCTS
Pocket Twin Folding Magnifier, 6x + 6x, 12x
$6.90(Ex GST)
Folding Linen Tester Magnifier, 5.5×, 30 mm
$12.50(Ex GST)
Joule’s Calorimeter Assembly with 2 Ohm Heating Coil
$69.90(Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab
