LED Digital Single Module Dry Bath with 1 Free Heating Block, up to 105°C
- Free includes 1 heating block supplied with the LED Digital Single Module Dry Bath
- Single module dry bath design supports compatible heating block use for routine laboratory sample heating
- LED digital dry bath for controlled laboratory sample heating workflows
- Temperature control range supports room temperature +5°C to 105°C
- Temperature setting range is listed as 25°C to 105°C
- Temperature control accuracy is ±0.3°C at 25-90°C and ±0.6°C at 90-105°C
- Temperature display accuracy is listed as 0.1°C for clear monitoring
- Temperature uniformity at 37°C is specified as ±0.2°C
- Time setting range supports 0 minutes to 99 hours 59 minutes
- USB interface can be used to trace historical data based on supplied product features
- External temperature sensor is included for compatible temperature monitoring workflows
- LED display and knob adjustment support simple routine operation
- Overheating protection and sound reminder function support safer laboratory use
- Block lid helps with heat preservation and helps reduce contamination risk
- Heating block compatibility, tube format, sample vessel size and operating conditions should be confirmed before use
- Description
Description
The LED Digital Single Module Dry Bath, also known as a single-block digital dry bath incubator, is designed for controlled dry heating of compatible laboratory samples, tubes and vessels in routine sample preparation and temperature-controlled workflows.
This single module dry bath supports a temperature control range from room temperature +5°C to 105°C. The supplied specification table lists a temperature setting range of 20°C to 105°C, supporting practical heating control for routine laboratory applications.
The unit provides temperature control accuracy of ±0.3°C from 25°C to 90°C and ±0.6°C from 90°C to 105°C. Temperature display accuracy is stated as 0.1°C, allowing users to monitor set and operating conditions clearly during use.
Temperature uniformity is stated as ±0.2°C at 37°C, supporting consistent heat transfer across compatible heating block applications. This makes the unit suitable for workflows where stable dry bath heating is required for prepared samples.
The time setting range is 0 minutes to 99 hours 59 minutes, supporting both short heating steps and extended temperature-hold procedures. The LED display and knob adjustment provide straightforward operation for daily laboratory use.
The dry bath includes an external temperature sensor, overheating protection and a sound reminder function. The USB interface is listed for tracing historical data, supporting laboratories that require accessible operation records for routine heating workflows.
This product is supplied with 1 free heating block. The heating block is equipped with a lid to support heat preservation and help reduce exposure during operation. Heating block format, tube size and sample vessel compatibility should be confirmed before use.
The supplied specifications list 100 W power, 110/220 V, 50/60 Hz voltage/frequency, 290 × 210 × 120 mm dimensions and 3.2 kg weight. Permissible ambient operating conditions are stated as 10°C to 40°C and <80% RH.
LabChoice Australia supplies LED Digital Single Module Dry Baths for school laboratories, university teaching spaces, research laboratories, clinical teaching environments and routine sample preparation workspaces. They are suitable for supervised dry heating, incubation-style workflows and controlled temperature applications using compatible heating blocks and vessels.
| Specification | Details |
|---|---|
| Temperature range | Room temp+5-105℃ |
| Temperature control accuracy | @25-90℃: ±0.3℃ | @90-105℃: ±0.6℃ |
| Temperature uniformity@37℃ | ±0.2 |
| External sensor | Yes |
| Display | LED |
| Dimension [WxDxH] | 290x210X120 mm |
| Permissible ambient temperature | 10-40℃ |
| Temperature Setting range | 20-105℃ |
| Temperature display accuracy | 0.1 |
| Time setting range | 0min~99h59min |
| Power | 100 W |
| Voltage/Frequency | 110/220V,50/60HZ |
| Weight | 3.2 kg |
| Permissible ambient humidity | <80% RH |
Dual Range Centre Zero Student Microammeter
From $43.90 (Ex GST)
Steel Ball Set, 3 Sizes, 20 Balls per Size
$42.50(Ex GST)
Tube Connectors, Glass Laboratory Type
From $0.80 (Ex GST)
Microplate Clamp for Vortex Mixers
$44.50(Ex GST)
Human Reproductive System teaching models
From $207.90 (Ex GST)
Sterile Cell Scrapers, Rotating Blade Tissue Culture Range
From $2.50 (Ex GST)
You May Also Need
5 Roller Tube Mixer
From $1,993.00 (Ex GST)
Block for Cuvettes
$392.00(Ex GST)
Hybridisation Oven
$6,274.00(Ex GST)
Hybridisation Oven Platform
From $1,366.00 (Ex GST)
Immersion Cooler
$5,749.00(Ex GST)
Laboratory Dry Bath Incubator
$976.50(Ex GST)
Laboratory Water Bath with Hot Plate
From $236.90 (Ex GST)
Medium Orbital Shaker Analogue
$2,062.00(Ex GST)
Micro Tray Block
From $308.00 (Ex GST)
Orbital Shaking Incubator
From $6,639.00 (Ex GST)
Recirculating Cooler with Tank
$8,262.00(Ex GST)
Rotary Tube Mixer with Disc
$1,439.00(Ex GST)
Round Block with Holes For Tubes
From $227.00 (Ex GST)
Simmerstat Control with Combined Hot Plates & Magnetic Stirrer
From $835.90 (Ex GST)
Simple Heating Mantles, Controlled Heating for Round Bottom Flasks
From $311.50 (Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Polypropylene Filter Funnels, 50 mm to 150 mm Range
From $1.50 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From $3.90 (Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab