High Power Signal Generator, 0.1 Hz to 100 kHz
$621.90(Ex GST)
$621.90(Ex GST)
- High power signal generator for physics and electronics teaching
- Frequency range is stated as 0.1 Hz to 100 kHz
- Frequency selection is provided over 6 ranges by graduated knob
- Selectable sine, triangular and square waveform outputs
- 600 Ω output provides 0 to 10 V peak signal
- 20 Ω output provides adjustable 0 to 10 V peak signal
- High current output can drive suitable speakers and mechanical devices
- Description
- Datasheets & Manuals
Description
The High Power Signal Generator, also known as a laboratory waveform generator, is designed for producing controlled electrical signals in physics laboratories, electronics classrooms, university teaching laboratories and supervised educational circuit experiments.
This instrument is suitable for waveform demonstrations, audio experiments, resonance studies and practical electronics teaching. It can be used to provide sine, triangular and square waveforms for observing signal behaviour with compatible circuits and instruments. The frequency range is stated as 0.1 Hz to 100 kHz, selected over 6 ranges by a graduated control knob. This supports a broad range of classroom activities, from low-frequency mechanical vibration demonstrations through to higher frequency electronics experiments. Two output options are provided. Output 1 is stated as 600 Ω impedance with 0 to 10 V peak output. Output 2 is stated as 20 Ω impedance with adjustable 0 to 10 V peak output and current limiting at 0.5 A.
The selectable waveform options include sine, triangular, square with positive and negative excursion, and square with positive excursion only. These outputs support experiments involving waveform comparison, signal shape, resonance, audio response and oscilloscope observation. Because of its high current output, the generator can run suitable large speakers and other compatible mechanical devices directly without requiring a separate amplifier. This makes it useful for classroom demonstrations involving vibration, sound, resonance and mechanical response. The instrument operates from 240 V AC mains power and should be used only under appropriate supervision. Users should connect compatible loads, remain within the stated output limits and follow standard electrical safety procedures during laboratory and classroom operation.
LabChoice Australia supplies High Power Signal Generators for school physics departments, electronics classrooms, university teaching laboratories and educational electrical workspaces. They are suitable for supervised waveform generation, resonance studies, audio demonstrations, vibration experiments and practical circuit investigations.
Datasheets & Manuals
Document :
Product Information Sheet(Pdf)
Air Track Replacement Parts and Accessories
From $6.50 (Ex GST)
Knife Switches, Single and Double Pole Circuit Control Range
From $7.50 (Ex GST)
Digital Shaking Waterbath
From $3,057.00 (Ex GST)
Brass Slotted Weights, Mechanics and Force Experiment
From $4.90 (Ex GST)
Hipipette Adjustable 8-Channel Manual Pipette, Fully Autoclavable and Colour-Coded
From $796.50 (Ex GST)
LO-ToX Glass Thermometers, 405 mm White Back Laboratory Range
From $47.50 (Ex GST)
PTFE Smooth Stir Bars, General Purpose, Z10 to Z50 Sizes
From $2.50 (Ex GST)
Universal Alloy Bench Clamp for Rods up to 13 mm Diameter
$34.90(Ex GST)
Round Bottom Flask Three Neck Jointed BORO 3.3 Glass
From $36.90 (Ex GST)
You May Also Need
BeeSpi V Photogate, Battery Operated Speed Measurement Type
$143.50(Ex GST)
Centre Zero Student Meter for DC Current
From $43.90 (Ex GST)
Circuit Board Copper Foil Sheet, 150 × 150 mm
$17.50(Ex GST)
Circuit Board Kit, Worcester Pattern Complete
$171.90(Ex GST)
Digital Xenon Stroboscopes, XE and XEH Models
From $656.50 (Ex GST)
Electric Fields Apparatus and Junior Electricity Lab Kit
From $61.50 (Ex GST)
Electronics Trainer Panels, Complete Electronics Study System
From $376.90 (Ex GST)
Flat Plate Electrodes with Terminals, 75 × 25 × 3 mm
From $9.50 (Ex GST)
Genecon Generators and Electrostatic Generator, Electricity Teaching Range
From $72.50 (Ex GST)
Hand-Wound Motor/Generator Unit for U-Core Assemblies
$214.50(Ex GST)
Key Press Contact Switch, Silver-Plated Contact Points
$28.90(Ex GST)
Superconductivity Kit, Complete Set
From $18.90 (Ex GST)
Tri-Mode Signal Generator, Power Supply and Amplifier
$1,023.90(Ex GST)
Wimshurst Machine Spare Belts, Replacement Belt Set
From $12.50 (Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Polypropylene Filter Funnels, 50 mm to 150 mm Range
From $1.50 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From $3.90 (Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab