Moulded Helmholtz Coil Pair, 150 mm Diameter, With Feet and Ruler Included
$182.00(Ex GST)
- Pair of precision Helmholtz coils, 400 turns each, designed for magnetic field strength study and uniform-field setups.
- Heat-resistant polycarbonate formers with moulded feet, stable bench placement, locates over a standard 1/2 metre rule.
- Coil spacing set using the supplied wooden rule, supports repeatable geometry and consistent field measurements.
- 4 mm spin-free IEC terminals, current direction marked on each coil for correct wiring and polarity checks.
- 1 A max current, resistance about 20 Ω cold and 25 Ω warm, highlights heating effects during operation.
- Description
- Datasheets & Manuals
Description
The IEC Helmholtz coils are precision-made coils designed for magnetic field strength study using the standard Helmholtz pair arrangement. Each coil is wound with 400 turns of wire on a heat-resistant polycarbonate former. Moulded feet allow the coils to rest securely on the bench and locate over a standard 1/2 metre rule, with the coil spacing adjusted using the wooden rule supplied. The coils are normally used as a matched pair to create a more uniform magnetic field between them.
Each coil is fitted with 4 mm spin-free IEC terminals for reliable connections, and the current direction is clearly marked on each coil to support correct series wiring and repeatable setup. Maximum recommended coil current is 1 A to avoid overheating. Coil resistance is approximately 20 Ω when cold and about 25 Ω when warm, which is useful for understanding heating-related resistance change during practical work.
FAQs
Q: How many turns are wound on each coil?
A: 400 turns per coil.
Q: What is the coil former material?
A: Heat-resistant polycarbonate.
Q: How is the coil spacing set?
A: The spacing is adjusted over the wooden rule supplied, with feet locating over a standard 1/2 metre rule.
Q: What terminals are fitted?
A: 4 mm spin-free IEC terminals.
Q: What is the maximum recommended current?
A: 1 A maximum to avoid overheating.
Q: What is the coil resistance?
A: About 20 Ω cold and about 25 Ω warm.
Q: What are Helmholtz coils used for?
A: Magnetic field strength study, typically used as a pair
Similar Products
Biology Charts, Science Teaching Reference Posters
From $75.00 (Ex GST)
Physics Demonstration Balls, Happy and Unhappy Bounce Pair or Floating Density Ball
From $17.00 (Ex GST)
Bare Copper Wire, Standard Wire Gauge Electrical Reel Range
From $17.00 (Ex GST)
Polypropylene Draining Baskets, Autoclavable, With or Without Lid
From $8.00 (Ex GST)
West Condenser BORO 3.3 for Efficient Reflux Cooling
From $44.90 (Ex GST)
Vernier Calipers For Laboratory and Educational Work
From $8.00 (Ex GST)
Scale Pans, Laboratory Weighing Unit
From $6.30 (Ex GST)
Distillation Glass Adapter with Interchangeable Joint, BORO 3.3 Glass
From $64.90 (Ex GST)
Battery Holders for AA and D Cells, 1 to 4 Cells, 4 mm Terminals Options
From $1.50 (Ex GST)
BeeSpi V Photogate Speed Meter and Adjustable Holder
From $75.00 (Ex GST)
Centre Zero Student Meter, DC Current Demonstration and Polarity Teaching Type
From $35.00 (Ex GST)
Conductivity Electrodes, Stainless Steel Type
From $40.00 (Ex GST)
Electric Fields Apparatus and Junior Electricity Lab Kit
From $49.00 (Ex GST)
Electronics and Photonics Kit, Advanced Classroom Demonstration Kit
From $37.00 (Ex GST)
Electrophorus metal with Handle and Plate
From $42.00 (Ex GST)
Electrostatics Experiment Kits, Static Electricity Experiment Set
From $58.00 (Ex GST)
Flat Plate Electrodes, Terminal Fitted Conductivity and Electrochemistry Range
From $7.50 (Ex GST)
Genecon Generators and Electrostatic Generator, Electricity Teaching Range
From $58.00 (Ex GST)
Hand-Wound Motor/Generator Unit for U-Core Assemblies
$172.00(Ex GST)
Iron Filings, Magnetic Field Pattern Demonstration Material
From $6.00 (Ex GST)
U-Core Electromagnet and Armature Set, 12 V DC Rated
$78.00(Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Polypropylene Filter Funnels, Gravity Filtration Range
From $1.00 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From $3.90 (Ex GST)
LATEST PRODUCTS
Adam Polaris PTB/PBB Toploading Precision Balances for Lab Weighing
From $1,615.00 (Ex GST)
Adam Polaris Precision Balances for Accurate Lab Weighing
From $2,050.00 (Ex GST)
Adam PMB Moisture Analyser for Laboratory Moisture Testing
From $2,960.00 (Ex GST)
TOP RATED PRODUCTS
Adam Polaris PTB/PBB Toploading Precision Balances for Lab Weighing
From $1,615.00 (Ex GST)
Adam Polaris Precision Balances for Accurate Lab Weighing
From $2,050.00 (Ex GST)
Adam PMB Moisture Analyser for Laboratory Moisture Testing
From $2,960.00 (Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab