Circuit Board Rheostat, 10 Ohm, Spring Connect
AUD 19.90(Ex GST)
AUD 19.90(Ex GST)
- 10 ohm rheostat accessory for compatible circuit board kits
- Wire wound construction supports variable resistance demonstrations
- Spring contacts allow practical connection from pin to pin
- Suitable for basic electricity and resistance experiments
- Helps demonstrate current control in simple classroom circuits
- Useful as a replacement or accessory for Worcester-style circuit boards
- For laboratory or educational use only under appropriate supervision
[request_quote_button]
- Description
Description
The Circuit Board Rheostat, also known as a 10 ohm wire wound variable resistor, is designed for use with compatible classroom circuit board kits. It is suitable for school science laboratories, physics classrooms, electronics teaching rooms and supervised educational circuit experiments.
This rheostat provides a practical way to introduce variable resistance in basic electricity lessons. Students can use it to observe how changing resistance affects current flow, lamp brightness or circuit behaviour in suitable low-voltage teaching circuits. The supplied specification lists the rheostat as wire wound with a 10 ohm resistance value. This makes it suitable for demonstrations where a simple adjustable resistance component is required within a compatible circuit board setup.
Spring contacts are fitted to allow the component to connect from pin to pin on compatible circuit boards. This supports quick assembly, removal and repositioning during classroom practicals without soldering. The component is useful for teaching resistance, current control, Ohm’s Law concepts and simple circuit adjustment. It can be used as a replacement part or additional accessory for Worcester-style circuit board kits where a 10 ohm rheostat is required. Users should confirm circuit board compatibility, pin spacing and suitable operating conditions before use. No voltage, current or power rating was supplied, so the rheostat should only be used within the safe limits of the connected educational apparatus.
LabChoice Australia supplies Circuit Board Rheostats for school physics departments, electronics classrooms, university teaching laboratories and preparation rooms. They are suitable for supervised resistance demonstrations, basic electricity experiments, current-control activities and compatible circuit board teaching setups.
Rock Mineral and Fossil Study Kits with Hardness Testing Set
From AUD 47.50 (Ex GST)
Heat Conductometer on Handle for Thermal Conductivity
AUD 24.90(Ex GST)
Circuit Board Plain Spring Connectors
AUD 3.90(Ex GST)
Boyle’s Law High Pressure Spare Glass Tubes
From AUD 34.90 (Ex GST)
Receiver Delivery Adapter Short Stem BORO 3.3 Glass Laboratory Grade
From AUD 10.50 (Ex GST)
Constant Volume Thermometer for Charles’ Law Experiments
AUD 267.50(Ex GST)
Iron Slotted Weights and Hanger
From AUD 12.50 (Ex GST)
Cast Iron Bar Breaker Rods, Pack of 10
AUD 15.90(Ex GST)
Adam PMB Moisture Analyser for Laboratory Moisture Testing
From AUD 2,960.00 (Ex GST)
You May Also Need
5-Way Distribution Board with 5 Pair Terminals
AUD 129.50(Ex GST)
Battery Holders for D Cells with 4 mm Terminals
From AUD 11.50 (Ex GST)
BeeSpi V Photogate, Battery Operated Speed Measurement Type
AUD 143.50(Ex GST)
Circuit Board Main Board with 5 mm Metal Pins
AUD 34.90(Ex GST)
Digital Xenon Stroboscopes, XE and XEH Models
From AUD 656.50 (Ex GST)
Dissectible Transformer Complete Kit with Spot Welder
AUD 1,043.50(Ex GST)
Electric Fields Apparatus and Junior Electricity Lab Kit
From AUD 61.50 (Ex GST)
Electron Charge-to-Mass Apparatus with Tube, Solenoid Not Included
AUD 232.90(Ex GST)
Electronics and Photonics Kit, Advanced Classroom Demonstration Kit
From AUD 46.50 (Ex GST)
Electronics Trainer Panels, Complete Electronics Study System
From AUD 376.90 (Ex GST)
Electrostatics Experiment Kits, Static Electricity Experiment Set
From AUD 72.50 (Ex GST)
Iron Filings for Magnetic Field Experiments
From AUD 7.50 (Ex GST)
Moulded Helmholtz Coil Pair, 150 mm Diameter, With Feet and Ruler Included
AUD 226.90(Ex GST)
Superconductivity Kit, Complete Set
From AUD 18.90 (Ex GST)
Tri-Mode Signal Generator, Power Supply and Amplifier
AUD 1,023.90(Ex GST)
[porto_related_products_slider]
Recently Viewed Products
SELECT OPTIONS
BeeSpi V Photogate Holder, Adjustable Height and Angle
AUD 93.50(Ex GST)
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Petri Dishes, Polypropylene, Autoclavable & Reusable, High Quality
From AUD 1.20 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From AUD 3.90 (Ex GST)
Reagent Bottles, Wide Mouth, HDPE, Chemical-Resistant, Highly Reliable & Durable - Each
From AUD 1.50 (Ex GST)
LATEST PRODUCTS
Boss Head Clamp, 360° Rotatable Zinc for Retort Stands
AUD 26.90(Ex GST)
Cork Ring Support for Round-Bottom Flasks
From AUD 11.40 (Ex GST)
Carrier Tray, Polypropylene, for Laboratory Transport and Handling
AUD 59.90(Ex GST)
TOP RATED PRODUCTS
Boss Head Clamp, 360° Rotatable Zinc for Retort Stands
AUD 26.90(Ex GST)
Cork Ring Support for Round-Bottom Flasks
From AUD 11.40 (Ex GST)
Carrier Tray, Polypropylene, for Laboratory Transport and Handling
AUD 59.90(Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab