Short Deck Single Layer Rocking Tube Rotator Brushless DC Motor
$496.50(Ex GST)
$496.50(Ex GST)
- Gentle rocking and rotating action supports controlled laboratory sample mixing
- Adjustable speed range from 0 to 30 rpm suits low-speed mixing procedures
- Fixed 30 ± 3° tilt angle provides consistent rocking movement during operation
- Continuous operating mode supports procedures requiring uninterrupted sample motion
- Brushless DC motor supports reliable extended use and reduced maintenance
- Maximum load capacity of 1 kg accommodates compatible laboratory containers
- Available with various silicone mattress accessories for flexible sample placement
[request_quote_button]
- Description
Description
The Short Deck Rocking Rotator, also known as a rocking rotator mixer, provides gentle and continuous movement for laboratory samples placed on compatible silicone mattress accessories. Its combined rocking and rotating action is designed for procedures that require controlled sample movement without vigorous shaking or high-speed agitation.
The adjustable speed range from 0 to 30 rpm allows users to select a suitable movement rate according to the sample characteristics, container format and laboratory protocol. Its fixed tilt angle of 30 ± 3° produces consistent rocking action, helping maintain movement across the working surface during routine mixing procedures.
The unit operates continuously and can support laboratory workflows requiring extended sample movement. Its maximum load capacity of 1 kg allows compatible samples and containers to be distributed across the short deck while remaining within the specified operating limit.
A brushless DC motor provides dependable operation during prolonged use and reduces the routine maintenance associated with brushed motor systems. The instrument operates from a 100 to 240 V, 50/60 Hz power supply and has a rated power consumption of 15 W.
Various silicone mattress accessories are available to support different laboratory sample arrangements. The controlled motion can be used for gentle reagent blending, maintaining suspensions, routine sample preparation, incubation procedures requiring movement and pre-analytical mixing, where a laboratory method specifies low-speed rocking or rotating action.
LabChoice Australia supplies this Short Deck Rocking Rotator for biotechnology, molecular biology, biochemistry, microbiology, clinical research, pharmaceutical research, university, educational and general life-science laboratories. Its compact 295 × 160 × 120 mm dimensions, 1.8 kg instrument weight and permitted operating range of 5 to 40°C and up to 80% relative humidity support practical use in controlled laboratory environments.
| Specification | Details |
|---|---|
| Tilt angle | 30±3° |
| Motion type | Rocking Rotator Mixer |
| Speed range | 0-30 rpm |
| Run type | Continuous |
| Max. load capacity | 1 kg |
| Motor type | Brushless DC motor |
| Voltage | 100-240 V |
| Frequency | 50/60Hz |
| Power | 15 W |
| Dimension [D×W×H] | 295×160×120 mm |
| Weight | 1.8 kg |
| Permissible ambient temperature | 5-40℃ |
| Permissible ambient humidity | 80% RH |
Frequently Bought Together
LCD Digital Tube Rotator with 8-Place 50 mL Tube Holder Disk
$1,265.50(Ex GST)
Long Deck Single Layer Rocking Tube Rotator Brushless DC Motor
$554.50(Ex GST)
Tube Rotator for Sample Blood mixing, 0 to 80rpm
$612.50(Ex GST)
Long Deck Double Layer Rocking Tube Rotator Brushless DC Motor
$612.50(Ex GST)
Variable Speed Tube Roller, 6-Roller Sample Mixing with Brushless DC Motor
Adjustable Speed Tube Rotator for Laboratory Sample Mixing
Variable Speed LCD Digital Tube Roller, 6-Roller Type
2 mm Banana Plug Cable, 300 mm, Moulded Stackable
From $7.50 (Ex GST)
Low Range Glass Thermometers, 305 mm Total Immersion Laboratory Range
From $80.90 (Ex GST)
Reagent Reservoir for Multichannel Pipetting, Sterile
From $59.50 (Ex GST)
Adam Luna Analytical Balance, 0.0001g Laboratory Weighing Type
From $2,605.00 (Ex GST)
Flat Glass Plates Set of 6 for Interference Experiments
$59.90(Ex GST)
Cylindrical Dropping Funnel with PTFE Stopcock, Open Top, BORO 3.3 Glass
From $27.50 (Ex GST)
You May Also Need
Block for Falcon Tubes
From $255.00 (Ex GST)
Digital Laboratory Water bath, 7 L to 50 L with Heating Temperature Control
From $2,067.00 (Ex GST)
Digital Orbital Shaker
From $3,080.00 (Ex GST)
Flat Block for Vials
$254.00(Ex GST)
Hybridisation Oven Carousel Suit
From $1,216.00 (Ex GST)
Immersion Cooler
$5,749.00(Ex GST)
Medium Orbital Shaker Analogue
$2,062.00(Ex GST)
Medium Reciprocating Shaker
$3,640.00(Ex GST)
Medium Rotary Mixer
$3,333.00(Ex GST)
Micro Tray Block
From $308.00 (Ex GST)
Save 25%
Simmerstat Control with Combined Hot Plates & Magnetic Stirrer
From $626.00 (Ex GST)
Vernier Calipers For Laboratory and Educational Work
From $9.90 (Ex GST)
Vortex Mixer, up to 3000 rpm
From $542.00 (Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From $3.90 (Ex GST)
Polypropylene Filter Funnels, 50 mm to 150 mm Range
From $1.50 (Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab
