E
x
p
l
o
r
e
M
o
r
e
:
Heat & Light
Digital Microwave Transmitter Kit, Reflection Polarisation and Interference Teaching Set
$768.00(Ex GST)
$768.00(Ex GST)
- Digital microwave experiment kit for demonstrating wave behaviour in teaching laboratories
- Includes microwave transmitter and 360° rotating receiver for angle-based signal studies
- Two-section rotating guide rail supports adjustable transmitter, receiver and target positioning
- Stainless steel reflector and polariser support reflection and polarisation demonstrations
- Acrylic and wood absorption plates allow comparison of microwave signal changes through materials
- Interference accessories include scaled support rod, wave blocking baffles and angle guide pieces
- Supplied as a self-contained educational set for supervised physics and laboratory experiments
[request_quote_button]
- Description
Description
The Digital Microwave Transmitter Kit, also known as a microwave optics teaching apparatus, is designed for demonstrating reflection, polarisation, absorption and interference using microwave emission and reception. It is suitable for school physics laboratories, university teaching laboratories and educational science environments where students need to observe wave behaviour through practical experiments.The system includes a microwave transmitter with frequency listed as 10.525 Hz in the supplied data, paired with a microwave receiver that can rotate through 360°. This rotating receiver design allows users to vary the receiving angle and compare signal behaviour under different experimental arrangements.
A two-section experimental guide rail supports controlled positioning of the transmitter, receiver and test accessories. The guide rail can rotate to change the experimental angle, while two high brackets and two low brackets can be moved and fixed along the rail to support repeatable setup during classroom demonstrations. The kit includes a disc centre bracket and a pearl cotton rotating table that can be attached at the rail centre. This allows angle adjustment during reflection, polarisation and wave-direction experiments, helping students compare how signal response changes with geometry and target position.
Supplied accessories include one stainless steel reflector and one stainless steel polariser, both described as magnetically attracted. These components support practical demonstrations of microwave reflection and polarisation, allowing students to observe wave effects in a format similar to optical-style experiments.
The kit also includes two absorption plates, one acrylic and one wood. These allow users to compare how different materials affect microwave signal transmission or absorption, supporting practical discussion of material behaviour and wave interaction.
For interference activities, the set includes one stainless steel horizontal support rod with scale and wave blocking baffles listed as two large and one small reflective lenses. These accessories support structured interference and wave blocking demonstrations when arranged according to the experiment procedure. Additional supplied items include a pearl cotton container box with triangle pieces at 30°, 60° and 90°, a bottle of plastic particles and a double-headed headphone plug wire. Users should confirm all accessories, setup requirements and connection points before use.
LabChoice Australia supplies this Digital Microwave Transmitter Kit for school physics laboratories, university teaching laboratories and educational science departments. It is suitable for supervised experiments involving microwave reflection, polarisation, absorption, interference, angle measurement and wave behaviour using the supplied guide rail, transmitter, receiver and accessories.
FAQs
Q: What is the transmitter frequency?
A: The transmitter frequency is listed as 10.525 Hz.
Q: Can the receiver angle be changed?
A: Yes, the receiver can rotate 360 degrees to change the receiving angle.
Q: What components support reflection, polarisation, and absorption experiments?
A: A stainless steel reflector, a stainless steel polariser, plus acrylic and wood absorption plates are included.
Q: How is the experiment geometry adjusted?
A: Using the rotating two-section guide rail, movable high and low brackets, and the disc centre bracket.
Q: What is included for interference-style setups?
A: A stainless steel support rod with scale and wave blocking baffles listed as two large and one small reflective lenses.
Millikan’s Apparatus, Electron Charge Demonstration Unit
From $584.00 (Ex GST)
Digital pH Pen Meters, 0 to 14 pH
From $25.00 (Ex GST)
Calorimeter Heating Blocks, Educational Metal Block Set for Heat Studies
From $45.00 (Ex GST)
Glass Low Form Beaker BORO 3.3 Size 100 ML – 6 Pcs/Box
$16.00(Ex GST)
Biology Charts, Science Teaching Reference Posters
From $67.00 (Ex GST)
IEC Simmerstat Magnetic Stirrer Hot plate with Aluminium Plate
Polycarbonate Erlenmeyer Flask Baffled Bottom, Sterile
From $83.00 (Ex GST)
Amber HDPE Reagent Bottle, Narrow Mouth, Sterile
From $2.45 (Ex GST)
Banana Plugs, 4mm
From $4.00 (Ex GST)
You May Also Need
Bonded Compound Bar for Thermal Expansion
From $7.00 (Ex GST)
Brass Bar with Expansion Gauge and Insulated Handle
$34.00(Ex GST)
Frosted Acrylic Projection Screen with Feet, 200 × 200 mm
$24.00(Ex GST)
Gravesande’s Ball and Ring Apparatus, Brass Set
$29.00(Ex GST)
Heat Conductivity Rods, 300 × 6 mm, Individual Metals and Set of 4
From $9.00 (Ex GST)
Holographic Diffraction Gratings
From $9.00 (Ex GST)
Hot/Cold Thermopile on Heat Sink with Socket Terminals
$88.00(Ex GST)
Polaroid Filter Pairs, 50 × 50 mm to 100 × 100 mm
From $16.00 (Ex GST)
Simple Copper–Constantan Thermocouple, 200 mm Length
$7.00(Ex GST)
Spectrum Tube EHV Unit and Tube Support, Without Tubes
$299.00(Ex GST)
Thermal Conductivity Bars
$25.00(Ex GST)
Two Metal Laminated Strip Compound Bar
$12.00(Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Petri Dishes, Polypropylene, Autoclavable & Reusable, High Quality
From $1.00 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From $3.00 (Ex GST)
LATEST PRODUCTS
TOP RATED PRODUCTS
Biological Head Model on Base with Neck and Brain
$133.00(Ex GST)
Biological Nervous System Model on Board
$168.00(Ex GST)
Fibre Optics Educational Communications Kit
$40.00(Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab