E
x
p
l
o
r
e
M
o
r
e
:
Parts & Accessories
2 mm Banana Plug Cable, 300 mm, Moulded Stackable
From AUD 7.50 (Ex GST)
From AUD 7.50 (Ex GST)
- 300 mm laboratory connection leads for compatible 2 mm socket systems
- Fitted with 2 mm banana plugs on both ends
- Moulded stackable plug design supports multi-connection circuit setups
- Suitable for compact electronics kits and teaching circuit boards
- Colour options support polarity marking and circuit identification
- Short 300 mm length helps reduce wire slack on small trainer panels
- Available in black, blue, green, red and yellow colours
[request_quote_button]
- Description
Description
The 2 mm Banana Plug Cables, also known as 2 mm banana-to-banana laboratory leads, are designed for compact electrical circuit connections in electronics teaching kits, laboratory trainer panels and supervised educational setups. They are suitable for school science laboratories, university teaching laboratories, electronics classrooms and physics practical work. Each lead is 300 mm long and fitted with a 2 mm end stackable banana plug on both ends. This format supports direct connection between compatible 2 mm sockets during circuit assembly and demonstration work.
The moulded stackable plug design allows additional compatible leads to be connected at the plug point where the circuit setup permits. This supports multi-connection arrangements and flexible circuit building on suitable panels. The short 300 mm length is useful for compact electronics boards and small laboratory trainer systems. It helps keep wiring tidy, reduces excess slack and supports clearer circuit layouts during student experiments.
Colour options include black, blue, green, red and yellow. These colours help with polarity marking, signal tracing, circuit identification and organised classroom use across multiple student workstations. Users should confirm 2 mm socket compatibility before use, especially in laboratories where both 2 mm and 4 mm banana plug systems are present. These leads should be used only with suitable educational or laboratory circuits and within the limits of the connected apparatus.
LabChoice Australia supplies 2 mm Banana Plug Cables for school physics departments, electronics classrooms, university teaching laboratories, training kits and general educational circuit work. They are suitable for supervised circuit connection, electronics demonstrations, polarity identification and compact trainer panel wiring using compatible 2 mm socket systems.
Simple Clinometer (Inclinometer) for Angle Measurement
AUD 68.50(Ex GST)
Circuit Board Rheostat, 10 Ohm, Spring Connect
AUD 19.90(Ex GST)
Seismograph Teaching Model, Classroom Seismology Demonstration Set
AUD 83.50(Ex GST)
Sodium Ion Standard Solution, 150 ppm Calibration for Pocket Sodium Meters
AUD 110.00(Ex GST)
Erlenmeyer Flask Attachment (100mL-250ml), Operating speed: 0~1500rpm
AUD 73.50(Ex GST)
Glazed Porcelain Laboratory Spatula with Spoon End, 120 mm
AUD 3.90(Ex GST)
Conductivity Sensor, 0 µS/cm to 199.9 mS/cm Measurement Range
AUD 143.00(Ex GST)
Digital Dry Block Heater, Dual Block, 200°C
AUD 1,532.00(Ex GST)
You May Also Need
Air Table Pucks & Pivot Pin, Lab Accessory Pack
From AUD 6.90 (Ex GST)
Air Table, Dynamics and Kinematics Model
From AUD 4.50 (Ex GST)
Air Track Attachment Screws, Accessory
From AUD 2.50 (Ex GST)
Air Track End Plug for Track Tube
AUD 5.50(Ex GST)
Air Track Glider Attachments, Inelastic Collision Accessory Set
From AUD 78.50 (Ex GST)
Air Track Gliders for Low Friction Motion
From AUD 32.90 (Ex GST)
Air Track Plastic Inclination Block Set (4 Pieces)
AUD 8.90(Ex GST)
Air Track Replacement Velcro Strips, 20 × 75 mm, 2 Pairs
AUD 4.90(Ex GST)
Banana Plugs, 4mm
From AUD 5.50 (Ex GST)
Banana Plugs, 4mm Laboratory Type
From AUD 14.50 (Ex GST)
Boyle’s Law Syringe Only, Commercial Plastic Syringe
AUD 3.90(Ex GST)
Nylon Air Track End-of-Track Pulley Attachment
AUD 20.90(Ex GST)
Pack of 4 Blue D-Cell Battery Holders for Series or Parallel Connections
AUD 13.90(Ex GST)
Replacement Hose Assembly for Air Source (Spare),2m
AUD 42.50(Ex GST)
Support Rack for Radiation Source and Absorber Alignment
AUD 46.90(Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From AUD 3.90 (Ex GST)
Reagent Bottles, Wide Mouth, HDPE, Chemical-Resistant, Highly Reliable & Durable - Each
From AUD 1.50 (Ex GST)
Petri Dishes, Polypropylene, Autoclavable & Reusable, High Quality
From AUD 1.20 (Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab