5-Way Distribution Board with 5 Pair Terminals
AUD 129.50(Ex GST)
AUD 129.50(Ex GST)
- 5-way distribution board for laboratory electrical demonstrations
- IEC distribution board as listed
- Converts one power supply or signal generator output into 5 outlets
- Includes 5 pairs of sockets / terminals as listed
- One pair of input cables connects to the source device during use
- Useful for student group circuit demonstrations
- Suitable for power supply and signal generator distribution
- Practical accessory for physics and electronics teaching laboratories
- Helps multiple students access the same source output
- Confirm voltage, current and connector compatibility before use
- Do not use with mains electricity unless specifically rated
- Use under appropriate laboratory or educational supervision
[request_quote_button]
- Description
- Datasheets & Manuals
Description
The 5-Way Distribution Board with 5 Pair Terminals, also known as a laboratory power distribution board, is designed to distribute one compatible power supply or signal generator output into multiple student outlets. This IEC 5-way distribution board provides a convenient method of changing one source output into 5 pairs of available sockets, allowing several students or apparatus setups to connect to the same compatible source. One pair of cables is plugged into the power supply or signal generator, and the board then makes 5 pairs of sockets available for student use during supervised laboratory demonstrations.
This product is useful for physics, electronics and general science teaching where multiple circuit stations, student groups or demonstration points need access to a shared low-voltage supply or signal source. Users should confirm the power supply output, signal generator output, voltage limit, current load, connector type, polarity, circuit layout and supervision procedure before use. Do not overload the distribution board or connected source. Avoid short circuits, incorrect polarity, damaged leads, exposed conductors and unsuitable electrical connections.
This product is intended for laboratory or educational settings only and should be used under appropriate supervision. This item is supplied as the 5-way distribution board only. Power supply, signal generator, connecting leads, student circuits, meters, load devices and additional electrical accessories are not included unless specified separately.
LabChoice Australia supplies Distribution Boards and electrical teaching accessories for school science laboratories, university teaching laboratories and educational facilities requiring practical tools for circuit, power supply and signal generator demonstrations.
Datasheets & Manuals
Document :
Product Information Sheet(Pdf)
Spare Pestles, Replacement Pestles for Glass and Porcelain Mortars
From AUD 2.50 (Ex GST)
Pulley with Universal Clamp, 70 mm Plastic Pull
AUD 31.50(Ex GST)
Litmus Test Paper Strips, Blue, Red and Neutral
From AUD 6.90 (Ex GST)
Vacuum Pump Filter Cartridge for Rocker Pump Protection
From AUD 33.50 (Ex GST)
Centrifuge Tube with Flat Cap, Non-Sterile - Pack of 500 Tubes
From AUD 180.50 (Ex GST)
Acrylic Gas Jar with Cover, 17 × 5 cm
AUD 6.90(Ex GST)
Orbital Shaking Incubator
From AUD 6,639.00 (Ex GST)
Borosilicate Gas Jars with Ground Flange
From AUD 21.50 (Ex GST)
You May Also Need
Battery Holders for D Cells with 4 mm Terminals
From AUD 11.50 (Ex GST)
BeeSpi V Photogate, Battery Operated Speed Measurement Type
AUD 143.50(Ex GST)
Centre Zero Student Volt Meter, Dual Range Galvanometer Type
AUD 43.90(Ex GST)
Centre Zero Student Volt Meters, DC Polarity Teaching Type
From AUD 43.90 (Ex GST)
Circuit Board Main Board with 5 mm Metal Pins
AUD 34.90(Ex GST)
Conductivity Electrodes, Stainless Steel Type
From AUD 49.90 (Ex GST)
Electronics Trainer Panels, Complete Electronics Study System
From AUD 376.90 (Ex GST)
Electrostatics Experiment Kits, Static Electricity Experiment Set
From AUD 72.50 (Ex GST)
Fine-Grade Copper Mesh Sheet for Science Experiments
AUD 41.50(Ex GST)
Genecon Due 12 V and Genecon V3 3 V DC Hand Generators
From AUD 72.50 (Ex GST)
Moulded Helmholtz Coil Pair, 150 mm Diameter, With Feet and Ruler Included
AUD 226.90(Ex GST)
Oersted’s Apparatus with Magnetic Needle and Stand
AUD 37.50(Ex GST)
Ohm’s Law Apparatus with Meter, Rheostat and Push Key
AUD 136.90(Ex GST)
Tri-Mode Signal Generator, Power Supply and Amplifier
AUD 1,023.90(Ex GST)
Vacuum Surface Plate for Bell Jar and Vacuum Experiments
AUD 272.50(Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Petri Dishes, Polypropylene, Autoclavable & Reusable, High Quality
From AUD 1.20 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From AUD 3.90 (Ex GST)
Reagent Bottles, Wide Mouth, HDPE, Chemical-Resistant, Highly Reliable & Durable - Each
From AUD 1.50 (Ex GST)
LATEST PRODUCTS
Smart Pocket ORP Tester Kit ZenTest® ORP60-Z for ORP and Temperature
AUD 310.00(Ex GST)
TOP RATED PRODUCTS
Smart Pocket ORP Tester Kit ZenTest® ORP60-Z for ORP and Temperature
AUD 310.00(Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab