Melde’s Apparatus String Vibrator, 4–8 V AC Supply
- Melde’s string vibrator for standing waves, cord attaches to armature tip hole, bench-mounted clamp included.
- Cord runs along bench and over edge via pulley, hanging weight sets known tension for repeat studies.
- Pulley-on-rod adjusts so cord stays parallel to bench top, improves alignment and pattern clarity.
- Driven by high-power signal generator, armature adjusted and clamped to vibrate at set frequency.
- Produces measurable standing-wave patterns, supports frequency–wavelength relationships in string experiments.
$185.00 (Ex GST)
Melting Point Capillary Tubes, Melting Point Determination, Borosilicate Glass
- Consistent wall thickness ensures even heat distributionÂ
- Open or closed ends available for flexibilityÂ
- Retains small sample volumes for accurate testingÂ
- Suitable for TLC, purity testing, and compound IDÂ
- Used in pharma, biochemistry, plant analysis, and QCÂ
- Made from LabChoice BORO 3.3 glass – High qualityÂ
From $7.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Microscope Glass Slides One Side Frosted, Laboratory Use
- One side frosted microscope glass slides for clear labelling and sample identification
- High quality clear glass with uniform thickness for consistent optical performance
- Frosted end supports pencil or marker labelling without smudging
- Smooth polished edges for safe handling during slide preparation
- Suitable for routine microscopy in schools, universities, research, and clinical laboratories.
From $8.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Microscope Lamps, Laboratory Illumination Type
- Microscope lamps for bench illumination, options for 220/240V mains or 12V AC/DC low voltage operation
- 240V models use 25W pearl lamp with clear or blue tint front glass, blue tint compensates red content
- 12V model uses 12V 20W QI lamp with inbuilt reflector, runs cooler and provides brighter whiter beam
- Strong stainless steel stand holds lamp body, removal by firm pull to spring off stand, described as virtually unbreakable
- Cable options: 1 m two core mains lead with two pin plug, or 1 m lead with stackable 4 mm plugs and lamp to lamp plug through
From $57.60 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Microscopic Glass Slides Plain for Laboratory Use
- Plain microscopic glass slides for routine laboratory microscopy
- Clear, laboratory-grade glass for accurate sample observation
- Smooth, flat surface suitable for staining and mounting specimens
- Compatible with standard cover slips and light microscopes
- Ideal for biological, clinical, and educational applications
- Consistent quality for reliable everyday laboratory use
- Supplied by LabChoice Australia
From $10.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Millikan’s Apparatus
- Atomises latex solution into spheres
- Static charging via rubber hose
- Charged plate cell, reversible voltage
- Telescope with graticule observation
- Plate potential plus sphere velocities for electron charge calculation
From $676.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Mini Power Supply, Low Voltage Regulated Type
- Compact IEC transformer power sources with 240V mains input and fixed 6V and 12V outputs
- Available as DC only outputs for DC motors and electromagnet experiments, or AC only outputs for light box and lamps
- Total load rated 4 amps, designed for classroom and bench low voltage equipment operation
- Each output has self resetting overload protection, trips above 4 amps and resets when overload removed
- Supplied with mains power cable, AC model sized to fit reserved compartment in Hodson styrene foam housing
From $104.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Mortar Pestle Set, Porcelain, Ideal for Laboratory, Sizes Available
- Durable porcelain body resists chipping and wearÂ
- Unglazed grinding surface ensures efficient crushingÂ
- Available in multiple sizes to suit all needsÂ
- Ideal for grinding solids into fine powdersÂ
- Used in chemistry, pharma, botany, and educationÂ
- Supplied by LabChoice Australia – Trusted laboratory supplierÂ
From $8.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Motor Drive Unit with Pulley, Variable Speed Laboratory Unit
From $176.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Moulded Helmholtz Coil Pair, 150 mm Diameter, With Feet and Ruler Included
- Pair of precision Helmholtz coils, 400 turns each, designed for magnetic field strength study and uniform-field setups.
- Heat-resistant polycarbonate formers with moulded feet, stable bench placement, locates over a standard 1/2 metre rule.
- Coil spacing set using the supplied wooden rule, supports repeatable geometry and consistent field measurements.
- 4 mm spin-free IEC terminals, current direction marked on each coil for correct wiring and polarity checks.
- 1 A max current, resistance about 20 Ω cold and 25 Ω warm, highlights heating effects during operation.
$182.00 (Ex GST)
Multiple Connection Glass Bend Adapter (PIG Type) BORO 3.3
- PIG type multiple connection bend designed for complex laboratory glassware assemblies
- Allows smooth directional change while maintaining multiple joint connections
- Precision ground joints ensure leak-tight, secure fit in vacuum and pressure setups
- Suitable for synthesis, distillation, and custom reaction apparatus
- High thermal and chemical resistance for demanding lab applications
- Made from LabChoice BORO 3.3 glass – High quality
Natural Rubber Bunsen Burner Tube, High Quality
- Natural rubber Bunsen burner tube for connecting burners to laboratory gas taps
- Flexible tubing for easy fitting and reliable sealing on standard hose barbs
- Supports steady gas flow, helps reduce kinks during normal bench use
- Durable for routine heating work in school, university, and general laboratories
- Suitable for common lab gas outlets and compatible Bunsen burner fittings
- Ideal for practical classes, demonstrations, and everyday lab heating setups
$19.90 (Ex GST)
Norwood-Style Glass Electrodes, Set of 4, Kit Components
- Set of four sealed glass electrode tubes with protruding terminals for direct power connection
- Electrode types included, 2 carbon rods, 1 stainless steel rod, 1 platinum wire, all in glass.
- Bracket holds any two electrodes, hangs into a small beaker for stable electrolysis setup.
- Suitable for electrolysis demonstrations and comparative electrode material experiments in teaching labs.
- Glass tubes allow gas generation and collection inside tubes, making reaction products visible.
$101.00 (Ex GST)
Nylon Air Track End-of-Track Pulley Attachment
- Air track end pulley on mounting strip, provides fixed pulley point for cord-based air track experiments.
- Flat-top attachment screw included, secures strip to end fitting of air tube for stable mounting.
- Designed for end-of-track installation, supports consistent alignment and smooth cord routing.
- Simple replacement accessory for air track setups, restores pulley function at track end.
- Mounting strip format keeps pulley positioned correctly on tube end fitting during repeated runs.
$16.60 (Ex GST)
Nylon Pulleys, Lightweight Laboratory Model
- 50 mm nylon pulley range for mechanics experiments, supports cord redirection, load lifting studies and pulley system demonstrations
- Sheave frame options include 1 to 4 sheaves with pressed aluminium frames, strong hooks, silversteel shafts, screws and nuts for repair
- Bench mount horizontal pulley clamps to flat surfaces, max clamp thickness 25 mm, protective pad helps prevent bench damage
- Vertical adjustable pulley uses universal bench clamp opening to 40 mm, holds devices up to 12.5 mm diameter, pulley can be positioned and directed
- Pulley on anodised aluminium rod options use 8 mm x 200 mm rods, straight or bent with offset groove alignment for consistent cord path
From $15.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Oil and Water Separator Receiver Apparatus BORO 3.3 Glass
- Designed for efficient separation of immiscible oil and water phases during distillation
- Manufactured from high quality BORO 3.3 borosilicate glass for chemical and thermal resistance
- Clear visibility enables accurate observation of phase separation and volume collection
- Ideal for essential oil extraction, solvent recovery, and laboratory distillation setups
- Compatible with standard laboratory distillation assemblies and condensers
- Suitable for research laboratories, pilot setups, education, and essential oil applications
From $44.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Oscillator Generator at Very Slow Range & Low-Frequency AC Sine
- Very low frequency sine output 0.1 Hz, 10 s per cycle, ideal for slow, visible waveform demonstrations.
- Output 15 V peak-to-peak, up to 5 mA, suitable for low-current teaching circuits and indicators.
- Frequency accuracy about ±5%, supports predictable timing for lab activities and demonstration pacing.
- Press button hold, stops oscillation, locks output at 7.5 V for event synchronisation tests.
- Supports inductor phase studies and LED-based rectifier bridge operation shown in slow motion.
$140.00 (Ex GST)
Pack of 4 Blue D-Cell Battery Holders for Series or Parallel Connections
- Pack of 4 blue D-cell holders, supports series or parallel wiring for flexible DC supply setups.
- Series connection option increases voltage output, suitable for higher voltage requirements in circuits.
- Parallel connection option increases capacity, supports longer operation and higher current availability.
- Useful for teaching electrical concepts, comparing voltage versus capacity effects in simple experiments.
- D-cell format for practical classroom power, compatible with common lab and education circuit builds.
$11.10 (Ex GST)
Parafilm Sealing Film, Laboratory Grade Stretch Film for Airtight Seals
- Creates airtight, moisture-resistant laboratory sealsÂ
- Flexible and stretchable for wrapping irregular shapesÂ
- Used for flasks, test tubes, petri dishes, and beakersÂ
- Ideal for storage, microbial work, and research setupsÂ
- Prevents evaporation and contamination effectivelyÂ
- Trusted lab sealing film from LabChoice AustraliaÂ
From $55.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Pasteur Transfer Pipette, Disposable Plastic Pipette for Safe Liquid Handling, 500 pcs Box
- Safe and disposable for contamination-free transferÂ
- Soft plastic for precise, controlled dispensingÂ
- Available in 1 ml and 3 ml capacitiesÂ
- Ideal for routine sample handling and transfersÂ
- Used in pathology, research, and teaching labsÂ
- Supplied by LabChoice Australia – Reliable qualityÂ
From $26.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Pear Shaped Flask For Distillation, BORO 3.3 Glass
- Pear-shaped profile supports efficient boiling and controlled distillation of liquids
- Narrow neck design helps reduce solvent loss and improves vapour direction into the condenser
- Uniform wall thickness promotes even heat distribution and stable thermal performance
- Suitable for distillation, solvent recovery, rotary evaporation, and synthesis applications
- Compatible with heating mantles and standard laboratory setups
- Made from LabChoice BORO 3.3 glass – High quality, supplied by LabChoice Australia
From $65.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Pendulum Bobs, Assorted Size Laboratory Set
- Pendulum bobs for mechanics experiments, available as brass, steel and plastic options plus a brass set of three
- Diameter options include 25 mm brass, 20 mm brass, 12.5 mm brass, 20 mm steel and 20 mm plastic as listed
- Brass set includes 25 mm, 20 mm and 12.5 mm bobs for comparing mass and damping effects
- Each bob has through hole plus counterbored hole, knot hidden inside for tamper-proof string attachment
- Designed for repeatable pendulum length setups, supports timing and oscillation investigations in classroom use
From $2.70 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Penny Head Ground Glass Stopper, High Quality Borosilicate Glass
- Penny head shape allows easy handling and gripÂ
- Ground glass taper ensures airtight sealingÂ
- Heavy quality glass for durability and lab safetyÂ
- Used in reagent bottles, flasks, and tubing portsÂ
- Ideal for chemical storage and sample protectionÂ
- Made from LabChoice BORO 3.3 glass – High quality
From $2.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Percolation for Herbal Alcohol Extract, BORO 3.3 Glass
- Designed for percolation of herbal alcohol extracts in laboratory and botanical processing applications
- Made from BORO 3.3 borosilicate glass for reliable chemical resistance and durability
- Suitable for handling alcohol-based extraction processes with improved material stability
- Clear glass body allows easy observation of extract flow and liquid level during use
- Helps support controlled liquid passage through herbal material for consistent extraction work
- Ideal for education, research, herbal preparation, and laboratory extraction setups
From $110.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Petri Dishes, Polypropylene, Autoclavable & Reusable, High Quality
- Reusable polypropylene construction for durabilityÂ
- Autoclavable design supports high-temperature sterilizationÂ
- Resistant to acids, alkalis, and solventsÂ
- Smooth surface for optimal microbial culture growthÂ
- Available in 5 sizes for varied applications
From $1.20 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Photoelectric Effect Apparatus
- Photoelectric effect demonstration setups
- Dual meters show current and backing volts
- Current resolution down to 0.1 nanoamps
- Light source options, lamp with filters or selectable LEDs
- Caesium and antimony on silver oxide cathode coating
From $143.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Pinch Clip for Tubing, Easy Use Control for Rubber or Plastic Tubes, High Quality
- Precise flow control for tubing systemsÂ
- Compatible with rubber and plastic tubesÂ
- Quick-release mechanism for easy useÂ
- Durable build for repeated lab applicationsÂ
- Used in fluid transfer, filtration, and setup controlÂ
- Supplied by LabChoice Australia – Reliable qualityÂ
$1.90 (Ex GST)
Pipette Filler Bulb Rubber, 3 Valve Type, Precision Lab Pipetting Accessory
- Three-valve system for precise liquid controlÂ
- Rubber body provides flexibility and durabilityÂ
- Supports safe, hands-free pipetting operationÂ
- Compatible with glass and plastic pipettesÂ
- Used in research, clinical, and teaching labsÂ
- Supplied by LabChoice Australia – High performanceÂ
$12.00 (Ex GST)
Pipette Filler Bulb, Laboratory Grade, Soft, Flexible Rubber for Easy Pipetting
- Soft rubber construction ensures comfortable useÂ
- Flexible design enables smooth aspiration and dispensingÂ
- Laboratory grade quality for reliable pipettingÂ
- Compatible with glass and plastic pipettesÂ
- Used in teaching, research, and clinical labsÂ
- Trusted by LabChoice Australia – Dependable labwareÂ
From $2.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Pipette Pump, Ergonomic ABS Design for Accurate Liquid Handling, High Quality
- Ergonomic grip for fatigue-free pipettingÂ
- Accurate dispensing with one-handed operationÂ
- Durable ABS body with corrosion resistanceÂ
- Quick-release thumb wheel for precision controlÂ
- Available in 2 ml, 10 ml, and 25 ml volumesÂ
- Supplied by LabChoice Australia – Trusted performanceÂ
From $19.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Pipette Stand Detachable, Holds 12 Pipettes, Lab-Grade Design, High Quality
- Holds up to 12 pipettes verticallyÂ
- Detachable design for easy assembly and cleaningÂ
- Stable base prevents tipping and contaminationÂ
- Suitable for glass and plastic pipettesÂ
- Organizes workbench and protects equipmentÂ
- Constructed from durable, lab-grade materialsÂ
$9.50 (Ex GST)
Plain Desiccator, Polypropylene Body for Moisture Free Sample Storage, High Quality
- lene, Durable Base for Round Bottom or Flat-Bottom Flasks lene, Durable Base for Round Bottom or Flat-Bottom
- Flasks Chemically resistant polypropylene for durabilityÂ
- Designed for ambient pressure desiccationÂ
- Provides moisture-free environment for samplesÂ
- Lightweight, corrosion-proof constructionÂ
- Used in labs for storage and drying tasks
From $64.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Plastic Spectroscope with Calibration Scale and Adjustable Slit
- Compact direct-vision spectroscope for viewing spectra and estimating wavelength using calibrated nm scale.
- Adjustable entrance slit controls light level and band sharpness for clearer spectral separation.
- Eyepiece fitted with 600 line/mm grating to disperse light into colour and wavelength components.
- Spectrum viewed against nanometre scale, each digit represents 100 nm for quick classroom readings.
- Black chamber improves viewing conditions by limiting stray light during spectroscopy demonstrations.
$55.00 (Ex GST)
didn't see what you are looking for ?
We’ll source it or make it for you. LabChoice supports your research every step.