High-Speed Microcentrifuge with 12-Place Angle Rotor, up to 15,000 rpm
- Adjustable speed range from 300 to 15,000 rpm in 100 rpm increments
- Maximum relative centrifugal force of 15,100 × g supports rapid microsample separation
- 12-place angle rotor accommodates 0.2, 0.5, 1.5 and 2 mL microcentrifuge tubes
- Pulse and short-time run functions support fast, convenient quick-spin procedures
- LCD provides clear operating information with selectable speed and RCF display
- Brushless DC motor reaches the selected speed rapidly while maintaining noise at ≤65 dB
- Door interlock, overspeed detection, over-temperature detection and automatic diagnostics support controlled operation
- Description
Description
The High-Speed Microcentrifuge, also known as a compact molecular biology centrifuge, is designed for rapid separation and processing of small-volume samples in compatible microcentrifuge tubes. Its 12-place angle rotor accommodates 0.2, 0.5, 1.5 and 2 mL tubes, supporting common molecular biology, biochemical and microsample preparation workflows.
The centrifuge provides an adjustable speed range from 300 to 15,000 rpm in 100 rpm increments and develops a maximum relative centrifugal force of 15,100 × g. Speed accuracy of ±20 rpm supports precise control during routine centrifugation. Users can switch between speed and RCF display according to the requirements of the laboratory protocol.
Run times can be programmed from 30 seconds to 99 minutes. Pulse operation and the short-time run function support quick spins, including collecting droplets from tube walls and caps or briefly sedimenting material at the bottom of compatible tubes. Acceleration to the selected speed is specified at approximately 11 seconds, with braking in approximately 15 seconds.
The brushless DC motor rapidly reaches the target speed and supports smooth operation with a specified noise level of no more than 65 dB. Wide-voltage technology enables operation from a 100 to 240 V, 50/60 Hz electrical supply and helps maintain speed stability where normal supply voltage fluctuations occur.
The centrifuge can support plasmid extraction, nucleic acid purification, DNA and RNA sample preparation, pre-sequencing processing, sedimentation of biological components and biochemical or chemical analysis of microsamples. It is suitable for molecular biology, genomics, biotechnology, biochemistry, clinical research, pharmaceutical research, university and general life-science laboratories using compatible tubes and validated centrifugation methods.
The automatic door lock and door interlock help restrict access to the rotor during operation. Overspeed detection, over-temperature detection and automatic internal diagnostics provide additional operational safeguards, while the audible alert signals completion of the run. The unit measures 272 × 260 × 154 mm, weighs 6.2 kg and has a rated power of 70 W.
LabChoice Australia supplies this High-Speed Microcentrifuge for laboratories requiring accurate, high-speed processing of small-volume biological, biochemical and chemical samples. Its compact footprint, 12-place angle rotor and quick-spin capability make it suitable for routine molecular biology and research workflows where controlled microcentrifugation is required.
| Specification | Details |
|---|---|
| Speed range | 300 to 15,000 rpm |
| Speed increment | 100 rpm |
| Maximum RCF | 15,100 x g |
| Speed accuracy | ±20 rpm |
| Rotor type | Angular rotor |
| Rotor capacity | 0.2/0.5/1.5/2 mL x 12 |
| Run time | 30 seconds to 99 minutes |
| Acceleration/Braking time | 11 seconds up, 15 seconds down |
| Display | LCD |
| Power | 70 W |
| Voltage/Frequency | 100 to 240 V, 50/60 Hz |
| Noise level | ≤65 dB |
| Motor type | Brushless DC motor |
| Dimensions | 272 x 260 x 154 mm |
| Weight | 6.2 kg |
| Safety performance | Door interlock, over-speed detection, over-temperature detection and automatic internal diagnosis |
| Other functions | Speed/RCF switch, short-time run function and sound-alert function |
Laboratory Platform Jacks, Height Adjustable Apparatus Support Range
From $118.50 (Ex GST)
Pendulum Bobs, Assorted Size Laboratory Set
From $3.50 (Ex GST)
Human Torso Anatomy Models For Teaching
From $224.50 (Ex GST)
Evaporating Dishes, Laboratory Glass Dish Range for Solvent Removal
From $9.90 (Ex GST)
Salt EC Sensor, 0.12 mL Sample Testing with Ti/Pt Black Cell
$143.00(Ex GST)
Similar Products
10 Roller Tube Mixer
From $2,589.00 (Ex GST)
5 Roller Tube Mixer
From $1,993.00 (Ex GST)
Digital Dry Block Heater with Microprocessor Control, 200°C with LED Display
From $1,382.00 (Ex GST)
Digital Laboratory Water bath, 7 L to 50 L with Heating Temperature Control
From $2,067.00 (Ex GST)
Digital Orbital Shaker
From $3,080.00 (Ex GST)
Hybridisation Oven
$6,274.00(Ex GST)
Hybridisation Oven Carousel Suit
From $1,216.00 (Ex GST)
Laboratory Dry Bath Incubator
$976.50(Ex GST)
Laboratory Water Bath with Hot Plate
From $236.90 (Ex GST)
Micro Tray Block
From $308.00 (Ex GST)
Mini Roller Mixers, Standard Tube and Bottle Laboratory Type
From $2,070.00 (Ex GST)
Simple Heating Mantles, Controlled Heating for Round Bottom Flasks
From $311.50 (Ex GST)
Vernier Calipers For Laboratory and Educational Work
From $9.90 (Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Polypropylene Filter Funnels, Gravity Filtration Range
From $1.50 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From $3.90 (Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab