High-Speed Mini Centrifuge with 12-Place Rotor, up to 15,000 rpm
- Adjustable speed range from 500 to 15,000 rpm in 100 rpm increments
- Maximum relative centrifugal force of 15,100 × g, adjustable in 100 × g increments
- Accommodates 12 × 0.2, 0.5, 1.5 or 2 mL microcentrifuge tubes
- Pulse and short-time run functions support fast, convenient quick-spin procedures
- Timed operation from 30 seconds to 99 minutes, with continuous running available
- Brushless DC motor provides rapid acceleration and quiet operation at ≤54 dB
- Automatic lid lock, overspeed detection, over-temperature detection and internal diagnostics support controlled operation
- Description
Description
The High-Speed Mini Centrifuge, also known as a compact laboratory microcentrifuge, is designed for rapid processing of small-volume samples in compatible 0.2, 0.5, 1.5 and 2 mL microcentrifuge tubes. Its 12-place capacity supports routine molecular biology, biochemistry and microsample preparation procedures while maintaining a compact benchtop footprint.
The centrifuge operates from 500 to 15,000 rpm in 100 rpm increments and produces a maximum relative centrifugal force of 15,100 × g. RCF can be adjusted in 100 × g increments, while speed accuracy of ±20 rpm supports precise control during high-speed centrifugation. Users can switch between speed and RCF display according to the requirements of the laboratory protocol.
Run time can be programmed from 30 seconds to 99 minutes, with continuous operation available for longer procedures. Pulse operation and the short-time run function support rapid quick spins, including collecting droplets from tube walls and caps or briefly sedimenting material at the bottom of compatible tubes. Acceleration is specified at approximately 11 seconds, with braking in approximately 9 seconds.
The brushless DC motor reaches the selected speed quickly and supports smooth operation with a specified noise level of no more than 54 dB. The unit operates from a single-phase 100 to 240 V, 50/60 Hz power supply with a rated input of 100 W, supporting installation across a broad range of controlled laboratory environments.
The centrifuge can support plasmid extraction, nucleic acid purification, DNA and RNA sample preparation, pre-sequencing processing, sedimentation of biological components and biochemical or chemical analysis of microsamples. It is suitable for molecular biology, genomics, biotechnology, biochemistry, clinical research, pharmaceutical research, university and general life-science laboratories using compatible tubes and validated centrifugation methods.
Automatic lid locking, door interlock, overspeed detection, over-temperature detection and automatic internal diagnostics provide multiple operational safeguards. A sound-alert function indicates completion of the centrifugation cycle. The instrument has passed an explosion-proof test and is supplied with CE, cTÜVus and FCC certification information as stated by the manufacturer.
LabChoice Australia supplies this High-Speed Mini Centrifuge for laboratories requiring accurate, high-speed processing of small-volume biological, biochemical and chemical samples. Its 255 × 245 × 140 mm dimensions, 6 kg weight, 12-place tube capacity and quiet operation support routine molecular biology and research workflows where controlled microcentrifugation is required.
| Specification | Details |
|---|---|
| Product type | Plus high speed micro centrifuge |
| Speed range | 500 to 15,000 rpm |
| Speed increment | 100 rpm |
| Maximum RCF | 15,100 x g |
| RCF increment | 100 x g |
| Speed accuracy | ±20 rpm |
| Rotor capacity | 0.2 mL, 0.5 mL, 1.5 mL and 2 mL x 12 |
| Run time | 30 seconds to 99 minutes or continuous |
| Acceleration/Braking time | 11 seconds up, 9 seconds down |
| Display | LCD |
| Power | Single-phase, 3A, 100 W |
| Voltage/Frequency | AC100 V to 240 V, 50 Hz/60 Hz |
| Noise level | ≤54 dB |
| Motor type | Brushless DC motor |
| Dimensions | 255 x 245 x 140 mm |
| Weight | 6 kg |
| Safety performance | Door interlock, over-speed detection, over-temperature detection and automatic internal diagnosis |
| Additional safety | Automatic lid-lock and over-speed detection |
| Certification | CE, cTÜVus and FCC |
| Testing | Passed rigorous explosion-proof test |
| Other functions | Speed/RCF switch, short-time run function and sound-alert function |
Save 10%
Benchtop Classical Series Multi-Parameter Meter for pH, Conductivity and DO Testing
From $2,467.50 (Ex GST)
Dial Thermometers, Direct Reading Spike Type Temperature Range
From $53.90 (Ex GST)
Universal Indicator pH Test Paper Strips, Broad Range Laboratory Type
From $8.90 (Ex GST)
Hand Tally Counters
From $12.00 (Ex GST)
Amber Volumetric Flask Class A with PE Stopper, BORO 3.3
From $11.90 (Ex GST)
Polypropylene Draining Baskets, Autoclavable, With or Without Lid
From $9.90 (Ex GST)
Jerrican with Cap, Leakproof Laboratory Storage and Transport Type - Each
From $61.50 (Ex GST)
Similar Products
Block for Epp Tubes
From $255.00 (Ex GST)
Digital Dry Block Heater with Microprocessor Control, 200°C with LED Display
From $1,382.00 (Ex GST)
Humidity Measurement Instruments For Laboratory
From $12.50 (Ex GST)
Hybridisation Oven
$6,274.00(Ex GST)
Hybridisation Oven Platform
From $1,366.00 (Ex GST)
Medium Orbital Shaker Analogue
$2,062.00(Ex GST)
Medium Reciprocating Shaker
$3,640.00(Ex GST)
Medium Rotary Mixer
$3,333.00(Ex GST)
Rotary Tube Mixer with Disc
$1,439.00(Ex GST)
Simmerstat Control with Combined Hot Plates & Magnetic Stirrer
From $835.90 (Ex GST)
Simmerstat Hot Plates
From $580.90 (Ex GST)
Vernier Calipers For Laboratory and Educational Work
From $9.90 (Ex GST)
Vortex Mixer, up to 3000 rpm
From $542.00 (Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Polypropylene Filter Funnels, Gravity Filtration Range
From $1.50 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From $3.90 (Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab