E
x
p
l
o
r
e
M
o
r
e
:
Parts & Accessories
Air Track Replacement Parts and Accessories
From $6.50 (Ex GST)
From $6.50 (Ex GST)
- Air track replacement parts and accessories for compatible systems
- Supports maintenance of motion, timing and spark recording setups
- Triangular air inlet end cap fits later model air track tubes only
- Sub base adjustment stud supports air tube straightness adjustment
- Fibreglass tape measure is 3 m long and 16 mm wide
- Glider accessories include spark pens, Alnico magnet and buffer spring
- Compatibility should be confirmed before selecting replacement parts
- Description
Description
The Air Track Replacement Parts and Accessories, also known as air track laboratory spares, are designed for maintaining, repairing and configuring compatible air track systems used in physics teaching. They are suitable for school physics laboratories, university teaching laboratories and supervised educational mechanics workspaces. This range includes replacement end caps, sub base adjustment hardware, measuring tape, spark recording parts, glider magnets and buffer springs. These parts support routine air track maintenance, motion studies, timing setups and spark recording demonstrations.
The triangular plastic air inlet end cap is a moulded end cap for later model air track tubes. It accepts the air hose from the current model air blower and is stated as not suitable for older model air track tubes. The sub base adjustment stud includes a metal stud with a square plastic head and blue adjusting nut. It is used to join the underside of the later model air track to the upper side of the sub base and supports adjustment of the air tube straightness. The fibreglass tape measure is stated as 3 m long and 16 mm wide. It is designed to fit the slot in the edge of the air tube and is supplied so it can be cut to the required length.
Glider accessories include spark pens supplied as a left and right hand pair in the new wire style. The spark pens are stated to fit any glider and support compatible spark recording experiments. An Alnico glider magnet is available for fitting to the glider spine, with a stated mass of 50 g. A stainless steel buffer spring with screw is also available for fitting to the end of tracks and the ends of gliders, and is stated to fit both old and newer model air track gliders. Users should confirm air track model, glider type, tube style, sub base compatibility and experiment setup before selecting replacement parts. These accessories are intended for supervised educational use with compatible air track apparatus.
LabChoice Australia supplies Air Track Parts and Accessories for school physics departments, university teaching laboratories and educational mechanics environments. They are suitable for maintaining air track systems, replacing worn components, supporting glider experiments, setting up spark recording activities and improving repeatability in low-friction motion demonstrations.
pH Sensor, Replacement Flat Sensor for Pocket pH Meters
$143.00(Ex GST)
Human Torso Anatomy Models For Teaching
From $224.50 (Ex GST)
Urine Test Paper Strips, 50 Strip Pack
$123.50(Ex GST)
Desiccator Vacuum Type with Lid, Neutral Glass, High Quality, Heavy Duty
From $167.00 (Ex GST)
Portable Bunsen Burner for Self-Sealing Gas Canister
$49.90(Ex GST)
You May Also Need
4 mm Banana Plug Cables, 300 mm, Moulded Stackable
From $8.50 (Ex GST)
Air Table Pucks & Pivot Pin, Lab Accessory Pack
From $6.90 (Ex GST)
Air Table, Dynamics and Kinematics Model
From $4.50 (Ex GST)
Air Track End Plug for Track Tube
$5.50(Ex GST)
Air Track Foot, Laboratory Track Support Unit
From $1.90 (Ex GST)
Air Track Gliders for Low Friction Motion
From $32.90 (Ex GST)
Air Track Non-Elastic Velcro Buffer Pair
$12.50(Ex GST)
Air Track Springs, Laboratory Motion Accessory Type
From $4.90 (Ex GST)
Air Track Stop Block for Track Systems
From $2.90 (Ex GST)
Alligator Clips, 4 mm Banana Plug Shank, Pack of 10
From $15.90 (Ex GST)
Banana Plugs, 4mm Laboratory Type
From $14.50 (Ex GST)
Hoffman Screw Tubing Clips, Adjustable Pinch Clamp for Flexible Tubing
From $6.90 (Ex GST)
Nylon Air Track End-of-Track Pulley Attachment
$20.90(Ex GST)
Steel Balls, Precision Laboratory Grade
From $50.90 (Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Polypropylene Filter Funnels, 50 mm to 150 mm Range
From $1.50 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From $3.90 (Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab
