12 V DC Electric Kinetic Theory Model Apparatus
- 12 V DC kinetic theory demonstrator, motor-driven vibrating platform inside scaled acrylic tube.
- Uses 100 stainless steel balls on rubber surface, agitation represents molecular motion in a gas.
- Motor speed variation changes ball agitation, models heating effects on particle motion intensity.
- Foam disc floats on agitated balls, height readable on scale, second heavier disc for comparison.
- Shows approximate link between disc weight as pressure model and floating height as volume model.
$292.00 (Ex GST)
Adjustable Inclined Plane with Pulley and Angle Scale
- Adjustable inclined plane for mechanics demonstrations, supports friction, vectors and force component experiments
- Plane size 100 x 500 mm, hinged to aluminium base that also acts as storage container for kit parts
- Angle adjustable up to 45 degrees, angle scale on adjustment bar, folds flat with no protruding scale for protection
- Top mounted pulley supports string and load style setups for inclined plane force balance and friction studies
- Surface options include melamine coated timber or glass surface version, accessories available separately as brass roller, nylon scale pan and aluminium rolling cart
From $110.30 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Air Track Accessory Kits, Collision Study Set
- Spark recording kits for 2.0 m or 2.5 m tracks, insulated electrode and tape rails, no spark generator included
- Glider pens transfer sparks to paper tape without contact, dot pitch measurement supports velocity and acceleration calculations
- Assembly kit fits 2.0 m and 2.5 m tubes, feet, levelling screws, end caps, O-rings, metric tape, end air plug
- Operation kit fits all models, two long and two short gliders, buffers, springs, pulley, magnets, weights, inclination blocks
- Photogate kit includes two gates with full leads, mounting legs lock to track corners, timer required separately
Air Track Systems, Low Friction Linear Motion Type
- IEC air track options in 2.0 m and 2.5 m lengths, supplied as air tube only, sub base kit, or complete ready to run track
- Air tubes specified as drilled and anodised, supplied with assembly kits and end seals as described
- Sub base kits mount below tube and use adjustable stud screws to pull the tube straighter for improved performance
- Complete tracks include both assembly kit and operational kit for experiments, tube only requires operational kit separately
- Optional accessories referenced: air blower and hose, photogate kit, electronic timer, spark recording kit with generator and cables
From $200.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
ASEP Powder-Coated Stream Tray
- Steel stream tray, 825 × 370 × 100 mm, strong classroom model surface for erosion studies.
- Powder-coated finish resists corrosion, suitable for repeated wet demonstrations with water flow.
- Fill with sand or similar materials to simulate soil and terrain, shape slopes and channels.
- Introduce water to observe erosion, channel cutting, and stream and river pattern formation.
- Supports hands-on earth science demonstrations of flow effects on landscapes and soil movement.
$218.40 (Ex GST)
Boyle’s Law Apparatus, Pressure Volume Demonstration Unit
- Two Boyle’s law teaching options, syringe weight compression for simple demonstrations or high pressure non mercury system
- Syringe type uses commercial plastic syringe and added weights, volume read by plunger position, friction gives approximate results
- High pressure kit uses sealed container with safe coloured fluid, small air pump and pressure gauge for controlled pressurisation
- Fluid rises in heavy walled glass tube as pressure increases, trapped air volume reduces for pressure volume calculations
- High pressure kit includes pump and coloured fluid, pointer marks starting volume, supervised laboratory and classroom use only
From $55.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Brass Slotted Weights, Precision Calibration Type
- Brass slotted weights for mechanics and force experiments, suitable for carriers and hanging load setups in classrooms
- Set options include 9 x 50 g on 50 g carrier total 500 g, or 9 x 100 g on 100 g carrier total 1000 g, accuracy 1%
- Individual slotted weights listed 5 g, 10 g, 20 g, 25 g, 50 g and 100 g, shaped to suit standard carriers as stated
- Mixed sets available, set of 5 totals 200 g accuracy 1%, set of 3 totals 35 g accuracy 2%
- Carriers and individual weights are noted as available separately, supports replacement and custom mass combinations
From $3.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Circular Motion Kits, Speed Control Teaching Model
- Centripetal force teaching kits for circular motion demonstrations in secondary and senior classroom mechanics
- Mini electric kit with speed control, compact classroom format, designed for safer handling and convincing results
- PSSC kit, classic cord and washer method, typically used outdoors, simple manual circular motion setup
- PSSC components listed, low friction glass handle, cord, metal washer weights, paper clip, rubber stopper, wood dowel, alligator clip
- Two kit styles for comparing traditional and modern circular motion teaching approaches under supervision
From $26.30 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Constant-Volume Thermometer for Charles’ Law Demonstrations ,1m
- Constant volume thermometer for Charles’ law practicals, shows pressure–temperature behaviour of trapped air.
- Air sample heated to known temperature points, volume held constant by adjusting mercury column.
- Measures pressure change versus temperature at fixed volume, practical route to gas law relationships.
- Similar in method to Boyle’s law style apparatus, controlled column adjustment supports accuracy.
- Constant-volume approach easier to perform accurately than constant-pressure volume change method.
$219.00 (Ex GST)
Dynamics Carts, Laboratory Collision and Motion Kit
- Dynamics carts supplied as pairs for mechanics experiments, choose with firing pin facility or without firing pin
- Hyper Fire version: 600 g each, firing pin on each cart, safety catch locks pin to prevent firing when secured
- Inboard wheel design helps reduce tangles during runs and collisions on benches or tracks
- Supplier identification notes include IEC hexagon logo and precision wheels on underside before purchasing
- Non firing version: 450 g each pair, listed without firing pin, other specifications not provided in supplied text
From $143.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Free Fall Apparatus, Adjustable Height Mechanical & Solenoid release
- Free fall apparatus options with adjustable upper platform on vertical rail, enables variable drop distance experiments
- Mechanical release models use metallic ball contact to create start signal and bottom plate impact to stop timing
- Solenoid release models use steel balls and require compatible digital timer to power solenoid and auto release on start
- Rail heights available 1 m or 1.5 m, ball sets supplied as three mixed balls or two steel balls by model
- Timer may be included or not included, cables and plugs supplied where stated, solenoid models specify 0.1 ms timing display with required timer
From $291.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Hooke’s Law Tension Spring Sets, Variable Spring Constant Type
- Tension spring sets for Hooke’s law experiments, supports mass versus extension measurements in mechanics teaching
- Two set types: non proportional set of five mixed springs, or proportional set of six springs designed to be relative
- Proportional set uses matched combinations of spring diameter, length and wire diameter, all springs have eye ends
- Non proportional set provides varied spring constants through mixed spring diameter, length and wire diameter specifications
- Spring dimensions and wire diameters are specified for each spring, supports controlled selection and repeatable class experiments
From $23.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Large Demonstration Manometer, ±300 mm Range
- Large U-tube water manometer, ±300 mm range, mm water height demonstration
- 100 × 560 mm panel with wall-hanging ring, clear classroom visibility
- 12 mm clear PVC hose U-formed, durable, easy to fill and observe levels
- 400 mm scale between legs, quick reading of level difference and direction
- Top tube ends accessible for gentle blowing or low-pressure connections, gas pressure demos
$126.00 (Ex GST)
Lever and Fulcrum Set with Weights and Hangers Included 1 m long
- 1 m lever and fulcrum apparatus, metre rule balances at midpoint to demonstrate moments and equilibrium.
- Knife-edge pivot at centre with V-bearing support, consistent fulcrum seating for repeatable balance tests.
- Shows moment law, weight × distance equality on both sides, clear torque comparison along the rule.
- Includes two 50 g slotted weight carriers, hook over rule edge and slide to any marked position.
- Standard slotted masses not supplied, designed to use existing school weights with supplied carriers.
$170.00 (Ex GST)
Nylon Pulleys, Lightweight Laboratory Model
- 50 mm nylon pulley range for mechanics experiments, supports cord redirection, load lifting studies and pulley system demonstrations
- Sheave frame options include 1 to 4 sheaves with pressed aluminium frames, strong hooks, silversteel shafts, screws and nuts for repair
- Bench mount horizontal pulley clamps to flat surfaces, max clamp thickness 25 mm, protective pad helps prevent bench damage
- Vertical adjustable pulley uses universal bench clamp opening to 40 mm, holds devices up to 12.5 mm diameter, pulley can be positioned and directed
- Pulley on anodised aluminium rod options use 8 mm x 200 mm rods, straight or bent with offset groove alignment for consistent cord path
From $15.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Pendulum Bobs, Assorted Size Laboratory Set
- Pendulum bobs for mechanics experiments, available as brass, steel and plastic options plus a brass set of three
- Diameter options include 25 mm brass, 20 mm brass, 12.5 mm brass, 20 mm steel and 20 mm plastic as listed
- Brass set includes 25 mm, 20 mm and 12.5 mm bobs for comparing mass and damping effects
- Each bob has through hole plus counterbored hole, knot hidden inside for tamper-proof string attachment
- Designed for repeatable pendulum length setups, supports timing and oscillation investigations in classroom use
From $2.70 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
PSSC 2D Collision Dynamics Practical Kit
- Bench-clamp 2D collision kit, angled ball impacts for momentum and vector component analysis.
- Different mass ball collisions supported, compare outcomes under controlled geometry and repeated trials.
- Carbon paper impact marks, clear floor record of landing points for measurement and calculations.
- Plumb bob zero reference, fixed origin improves distance and angle accuracy across student groups.
- Measures distances and angles to impact points, supports classroom dynamics laws and discussion work.
$41.00 (Ex GST)
PSSC Helical Steel Spring Kit
- Coil spring with eye ends for retort-stand suspension, quick setup for Hooke’s law extension tests.
- Includes plated steel masses 0.5 kg and 1 kg, use singly or together for stepped loading.
- Extension measured by rule or tape, supports force–extension plotting and proportionality checks.
- Optional mass verification by weighing for improved accuracy in calculated forces and comparisons.
- Simple basic PSSC kit for classroom mechanics, elastic behaviour, spring response under load demonstrations.
$70.00 (Ex GST)
PSSC Inertial Balance Experiment Kit
- Inertial balance kit demonstrates mass from oscillation frequency, clarifies mass versus weight concept.
- Fixed plate clamps to table, second overhanging plate oscillates horizontally via spring blade connection.
- Add masses to oscillating plate to change frequency, compare oscillation timing between different loads.
- Masses can sit on plate or be separately supported by cord, supports different loading approaches.
- Stopwatch timing method for oscillations, simple frequency comparison for classroom mechanics practicals.
$62.00 (Ex GST)
Rolling Cylinder Pair, Metal and Plastic Set
- Rolling cylinder pair, one plastic and one metal, classic incline rolling mechanics demonstration set.
- Same size and same total mass, controlled comparison removes size and mass as variables.
- Different internal mass distribution causes different rolling behaviour down the same slope conditions.
- Demonstrates rotational motion effects from mass distribution, useful for classroom discussion and timing runs.
- Heavy cylinders and plastic damage risk, handle carefully and avoid dropping during student practicals.
$128.00 (Ex GST)
Scale Pans, Laboratory Weighing Unit
- Scale pans with hooks for mechanics experiments, suitable for hanging masses with pulleys, springs and force setups
- Traditional pan size listed 75 mm diameter x 12 mm deep in plastic or metal, strong hook stated same as pulley sheaves
- Plastic version uses three miniature chains to join pan to hook, supports stable hanging and load placement
- Metal versions listed as aluminium or brass construction, three cords join pan to hook, cords stated as miniature chain
- One piece black nylon pan is 100 mm diameter x 12 mm deep, hinged sides form integrated hook with no loose parts
From $6.30 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Simple Wheel and Axle Pulley Set, Two Sizes Included
- The IEC 'Tensile Testing Machine' is a simple but effective system of measuring the tensile strength of metals. Wire is used so that the forces involved are small and can easily be applied in the classroom.
- The machine uses an accurate dial indicator (resolution of 0.01mm) to measure stretch (extension) and uses a set of normal slotted weights to apply tensile forces to the various wires.
- The machine provides 3 different anchor points for the wires so that, effectively, the wires can be tested at 3 different lengths.
- The machine is supplied with rolls of .037mmD copper wire, 0.32mmD brass wire and 0.28mmD iron wire. NOTE:: The 9x50g and / or 9x100g slotted weight sets are not supplied with the machine.
$72.10 (Ex GST)
Steel Ball Set, 3 Sizes, 20 Balls per Size
- Steel ball set with three diameters, 12.7 mm, 16 mm, 19 mm, consistent sizes for class practicals.
- Quantity 20 per size, supports group work and repeated trials with matched balls and setups.
- Suitable for rolling experiments, investigating motion on tracks, ramps, and flat surfaces.
- Useful for collision demonstrations, impact comparisons, and momentum style classroom activities.
- Supports falling and drop tests, basic mechanics observations using durable uniform steel spheres.
$34.00 (Ex GST)
Tensile Testing Machine for Strength of Materials Experiments
- Classroom tensile test machine for metal wire strength studies, low-force loading using standard slotted weights.
- Dial indicator measures extension with 0.01 mm resolution, supports clear stretch readings during loading steps.
- Three anchor points, enables testing at three effective wire lengths for comparative extension measurements.
- Supplied wire rolls, copper 0.37 mm, brass 0.32 mm, iron 0.28 mm diameters for student experiments.
- Slotted weight sets not included, requires standard 9 × 50 g and or 9 × 100 g sets for loading.
$319.00 (Ex GST)
didn't see what you are looking for ?
We’ll source it or make it for you. LabChoice supports your research every step.