E
x
p
l
o
r
e
M
o
r
e
:
Electrochemistry Meters & Analysers
Fluoride Ion Selective Electrode Kit, Combination, 1 m Cable
AUD 1,475.00(Ex GST)
AUD 1,475.00(Ex GST)
- Combination fluoride ion selective electrode kit for F⁻ measurement workflows
- Supplied with 1 fluoride electrode tip for compatible electrode operation
- Includes fluoride filling solution, 100 ppm standard, 1000 ppm standard and ionic strength adjustor
- Includes syringe, disposable dropper, protective pipe and manual
- 1 m cable with BNC connection compatibility for suitable pH / ION meters
- Fixed-temperature measurement conditions should be maintained for consistent ion testing
[request_quote_button]
- Description
- Datasheets & Manuals
Description
Fluoride Ion Selective Electrode Kit, Combination, 1 m Cable, also known as a fluoride ISE kit, is designed for laboratories that need targeted fluoride ion measurement using a compatible pH / ION meter.
This kit is suitable for water-quality testing, environmental analysis, education, research and routine laboratory workflows where fluoride concentration needs to be measured using an ion-selective method. It supports users who need a dedicated electrode setup for concentration-based fluoride testing. Ion selective electrodes respond to selected ion activity in the test liquid and are used with compatible meter systems after calibration with appropriate standards. Correct sample preparation, stable testing conditions and proper electrode care are important for dependable measurement performance.
Included with this Fluoride Ion Selective Electrode Kit: 1 Fluoride Electrode Tip, Filling Solution, 100 ppm Calibration Solution, 1000 ppm Calibration Solution and TISAB / Ionic Strength Adjustor.
Suitable for pH / ION Meters: This fluoride ISE kit is designed for use with compatible pH / ION meters for fluoride ion measurement workflows.
Users should confirm the required ionic strength adjustment method, calibration sequence, sample temperature and electrode maintenance procedure before use. The supplied product information references TISAB / ISAB terminology, so the exact supplied solution should be checked before ordering.
LabChoice Australia supplies Fluoride Ion Selective Electrode Kits for schools, universities, environmental testing laboratories, water-quality teams and research facilities requiring fluoride ion measurement using compatible pH / ION meter systems.
Features
- Fluoride F⁻ ion selective electrode kit
- Combination ion selective electrode format
- 1 m cable included
- BNC connector included
- Suitable for compatible pH / ION meters
- Includes fluoride electrode tip, 1 pc
- Includes 1000 mg/L fluoride ion standard solution, 50 mL
- Includes 100 mg/L fluoride ion standard solution, 50 mL
- Includes fluoride electrode filling solution, 50 mL
- Includes fluoride ionic strength adjustor, 50 mL
- Includes syringe
- Includes disposable dropper
- Includes protective pipe
- Includes manual
- Used with calibration standards for direct ion concentration readings on compatible ion meters
- Measurement temperature should be kept consistent because ion response can change with temperature
- TISAB / ionic strength adjustor requirement should be confirmed before ordering or operation
| Specification | Details |
|---|---|
| MODEL | 6561S-10C |
| Measurement Range | 0.02 – 19,080 mg/L F– |
| Temperature Range | 0 – 50°C |
| pH Range | pH 5 – 8 (0.1 – 1000 mg/L F–) |
| Accuracy | ±2% |
| Internal Electrode | Ag/AgCl |
| Internal Solution | 3.3 mol/L KCl |
| Liquid Junction | Movable sleeve |
| Connector & Cable Length | BNC, 1m |
| Dimensions | 150mm (length), 16.5mm (diameter) |
| Wetted Part Materials | LaF3, PSU |
| Slope | -53 to -62 mV/decade |
| Selection Coefficient | Possible interference when multiply-charged ion
(e.g., Al3+, Fe3+) coexisted and foamed the complex |
| Package Contents | Fluoride Ion Electrode Tip 1000 mg/L Fluoride Ion Standard Solution (50ml) 100 mg/L Fluoride Ion Standard Solution (50ml) Fluoride Ionic Strength Adjustor (50ml) Fluoride Ion Electrode Filling Solution (50ml) Syringe Dropper Protective Pipe Manual |
| Accessories and Solutions | |
| 7661S | Fluoride Ion Electrode Tip |
| 500-F-IFS | Fluoride Ion Electrode Filling Solution (500ml) |
| 500-F-SL | 100 mg/L Fluoride Ion Standard Solution (500ml) |
| 500-F-SH | 1000 mg/L Fluoride Ion Standard Solution (500ml) |
| 500-F-TISAB | Fluoride Ionic Strength Adjustor (500ml) |
Datasheets & Manuals
Document :
Product Information Sheet(Pdf)
Taste Test Paper Strips, Genetic Response Laboratory Type
From AUD 7.50 (Ex GST)
Student Triple Range DC Voltmeter, Physics Lab Voltage Teaching Meter
From AUD 43.90 (Ex GST)
Rain Gauges, Plastic Rainfall Measurement Type
From AUD 17.50 (Ex GST)
Reagent Reservoirs, Polypropylene, Sloped, Disposable, Ideal for Pipetting & Lab Use
From AUD 5.50 (Ex GST)
Water Turbine Hydro-Electric Power Educational Model
AUD 216.90(Ex GST)
Compact Vacuum Pressure Pump for Laboratory Filtration
AUD 94.90(Ex GST)
Air Track Nylon Pulley for End of Track
AUD 20.90(Ex GST)
Test Tube Holder, Wooden Peg Type, 180 mm Long
AUD 3.50(Ex GST)
You May Also Need
Save 10%
Benchtop Classical Series Multi-Parameter Meter for pH, Conductivity and DO Testing
From AUD 2,467.50 (Ex GST)
Fluoride Sensor, Replacement Sensor with 0.3 mL Direct Measurement
AUD 227.70(Ex GST)
Multi Function Soil Meters with Stem Probes
From AUD 24.90 (Ex GST)
Nitrate Ion Electrode, Replacement Sensor with Selective Flat Electrode
AUD 227.70(Ex GST)
Pocket Water Quality Meter, Single-Drop On-Site Testing
AUD 330.00(Ex GST)
Save 10%
Portable Single Parameters for pH, ORP, Conductivity and DO Testing
From AUD 1,435.50 (Ex GST)
Sodium Ion Electrode, Replacement Sensor with 2 to 9900 ppm Range
AUD 227.70(Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Petri Dishes, Polypropylene, Autoclavable & Reusable, High Quality
From AUD 1.20 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From AUD 3.90 (Ex GST)
Reagent Bottles, Wide Mouth, HDPE, Chemical-Resistant, Highly Reliable & Durable - Each
From AUD 1.50 (Ex GST)
LATEST PRODUCTS
TOP RATED PRODUCTS
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab