E
x
p
l
o
r
e
M
o
r
e
:
Electrochemistry Meters & Analysers
Chloride Ion Selective Electrode Kit, Combination, 1 m Cable
AUD 1,475.00(Ex GST)
AUD 1,475.00(Ex GST)
- Combination chloride ion selective electrode kit for Cl⁻ measurement workflows
- Supplied with 1 chloride electrode tip for compatible electrode operation
- Includes 100 ppm and 1000 ppm chloride ion calibration standards
- Supplied accessories include syringe, dropper, protective pipe, abrasive sheet and manual
- 1 m cable with BNC connection compatibility for suitable pH / ION meters
- 1M potassium nitrate solution requirement should be confirmed for ISAB and filling solution use
[request_quote_button]
- Description
- Datasheets & Manuals
Description
Chloride Ion Selective Electrode Kit, Combination, 1 m Cable, also known as a chloride ISE kit, is designed for laboratories that need targeted chloride ion measurement using a compatible pH / ION meter.
This kit is suitable for water-quality testing, environmental analysis, education, research and routine laboratory workflows where chloride concentration needs to be measured using an ion-selective method. It supports users who require concentration-based chloride readings after calibration with appropriate standards. Ion selective electrodes respond to the activity of selected ions in the test liquid and are used with compatible meter systems for direct ion concentration measurement after proper calibration. Consistent sample preparation, stable temperature conditions and correct electrode handling are important for dependable measurement performance.
Included with this Chloride Ion Selective Electrode Kit: 1 Chloride Electrode Tip, 100 ppm Calibration Standard and 1000 ppm Calibration Standard.
Suitable for pH / ION Meters: This chloride ISE kit is designed for use with compatible pH / ION meters for chloride ion measurement workflows.
Note: The supplied information states that 1M potassium nitrate solution, 1M KNO₃, is required for the ISAB and filling solution for the chloride ISE. It also contains package details listing chloride electrode filling solution and chloride ionic strength adjustor, so the final supplied inclusions should be confirmed before ordering.
LabChoice Australia supplies Chloride Ion Selective Electrode Kits for schools, universities, environmental testing laboratories, water-quality teams and research facilities requiring chloride ion measurement using compatible pH / ION meter systems.
Features
- Chloride Cl⁻ ion selective electrode kit
- Combination ion selective electrode format
- 1 m cable included
- BNC connector included
- Suitable for compatible pH / ION meters
- Includes chloride electrode tip, 1 pc
- Includes 1000 mg/L chloride ion standard solution, 50 mL
- Includes 100 mg/L chloride ion standard solution, 50 mL
- Includes chloride electrode filling solution, 50 mL, as listed in supplied package information
- Includes chloride ionic strength adjustor, 50 mL, as listed in supplied package information
- Includes syringe
- Includes disposable dropper
- Includes protective pipe
- Includes water-resistant abrasive sheet
- Includes manual
- 1M potassium nitrate solution, 1M KNO₃, is referenced as required for the chloride ISE
- Supplied filling solution and ISAB status should be confirmed before ordering because the supplied information contains both inclusion and exclusion notes
| Specification | Details |
|---|---|
| MODEL | 6560S-10C |
| Measurement Range | 0.35 – 35,000 mg/L Cl–
1 x 10-5 – 1 mol/L Cl– |
| Temperature Range | 0 – 50°C |
| pH Range | pH 3 – 11 (350 mg/L Cl-) |
| Accuracy | ±2% |
| Internal Electrode | Ag/AgCl |
| Internal Solution | 1 mol/L KNO3 |
| Liquid Junction | Movable sleeve |
| Connector & Cable Length | BNC, 1m |
| Dimensions | 150mm (length), 16.5mm (diameter) |
| Wetted Part Materials | PVC, PSU, AgCl |
| Slope | -53 to -62 mV/decade |
| Selection Coefficient | S2O32-, S2-, I–, Ag+, Hg2+ = Not acceptable
SCN– = 0.3, MnO4- = 0.1, Br– = 0.03 NO3–, F–, HCO3–, SO42-, PO42- = 1000 |
| Package Contents | Chloride Ion Electrode Tip 1000 mg/L Chloride Ion Standard Solution (50ml) 100 mg/L Chloride Ion Standard Solution (50ml) Syringe Dropper Protective Pipe Water-resistant abrasive sheet Manual |
| Accessories and Solutions | |
| 7660S | Chloride Ion Electrode Tip |
| 500-CL-SL | 100 mg/L Chloride Ion Standard Solution (500ml) |
| 500-CL-SH | 1000 mg/L Chloride Ion Standard Solution (500ml) |
Datasheets & Manuals
Document :
Product Information Sheet(Pdf)
Jacketed Coil Condenser BORO 3.3 Chemistry Grade
From AUD 137.90 (Ex GST)
Atomic Orbital Molecular Model Set, 14 Model Kit
AUD 90.90(Ex GST)
Laboratory Electroscope in Metal Housing
From AUD 85.90 (Ex GST)
Individual Mineral Specimens For Display
From AUD 27.50 (Ex GST)
Large Pulley with Universal Clamp, 70 mm
AUD 19.00(Ex GST)
Air Track Glider Soft Collision Attachment
AUD 81.90(Ex GST)
Concave Mirrors, 50 mm Diameter Classroom Optics Range
From AUD 3.50 (Ex GST)
Filter Funnels Long Stem 60 Degree Cone, BORO 3.3 Glass
From AUD 1.90 (Ex GST)
Molecular Model Set, Diamond
AUD 37.90(Ex GST)
You May Also Need
Calcium Ion Sensor, Replacement Sensor with 0.1 to 5.0 mmol/L Range
AUD 528.00(Ex GST)
Fluoride Sensor, Replacement Sensor with 0.3 mL Direct Measurement
AUD 227.70(Ex GST)
Pocket Nitrate Ion Meter, 0.3 mL Sample Testing with Up to 2 Calibration Points
AUD 1,314.50(Ex GST)
Save 10%
Pocket Testers with Bluetooth for Portable pH, ORP and Water Testing
From AUD 397.50 (Ex GST)
Save 10%
Portable Single Parameters for pH, ORP, Conductivity and DO Testing
From AUD 1,435.50 (Ex GST)
Salt Electrode, Replacement Sensor with 0.01 to 25% Salt Range
AUD 227.70(Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Petri Dishes, Polypropylene, Autoclavable & Reusable, High Quality
From AUD 1.20 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From AUD 3.90 (Ex GST)
Laboratory Beaker, Low Form, Graduated with Spout, Borosilicate Glass (BORO 3.3)
From AUD 2.00 (Ex GST)
LATEST PRODUCTS
ORP Electrode 301Pt-C Combination with Platinum Ring
AUD 165.00(Ex GST)
Temperature Probe MP500 with RCA Connector for Apera Meters, -10 to 110°C
AUD 110.00(Ex GST)
TOP RATED PRODUCTS
ORP Electrode 301Pt-C Combination with Platinum Ring
AUD 165.00(Ex GST)
Temperature Probe MP500 with RCA Connector for Apera Meters, -10 to 110°C
AUD 110.00(Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab