E
x
p
l
o
r
e
M
o
r
e
:
Parts & Accessories
Air Track Metal Brace for Lateral Feet
AUD 10.90(Ex GST)
AUD 10.90(Ex GST)
- Metal brace for compatible air track support feet
- Designed to reinforce double lateral support feet
- Suitable for later model air track setups
- Helps improve foot support stability during approved use
- Practical spare or replacement part for air track maintenance
- Useful for school, university and teaching laboratory use
- Supports reliable setup for motion and dynamics experiments
- Compatible with approved air track foot assemblies
- Confirm air track model and lateral foot compatibility before ordering
- Metal brace only, lateral feet are not included
- Air track and sub base are not included unless specified separately
- Use under appropriate laboratory or educational supervision
[request_quote_button]
- Description
Description
The Air Track Metal Brace for Lateral Feet, also known as an air track lateral foot reinforcement brace, is designed for use with compatible later model air track systems. This metal brace is used to reinforce the double lateral support feet fitted to the air track, helping maintain stable support during approved classroom physics experiments. It is a practical spare or replacement part for laboratories maintaining air track equipment used for motion, dynamics, velocity, acceleration and collision demonstrations. The brace supports the structural stability of compatible lateral foot assemblies, helping reduce movement or weakness where reinforcement is required.
Users should confirm the air track model, foot style, brace fit, fixing method and compatibility with the later model air track before ordering or installation. The brace should be installed securely before the air track is used. Do not operate the equipment if the support feet are loose, damaged, unstable or incorrectly reinforced. Avoid overtightening fixings, as this may damage the brace, lateral feet, track base or threaded components.
This product is intended for laboratory or educational settings only and should be used under appropriate teacher or laboratory supervision. This item is supplied as the metal brace only. Lateral support feet, screws, nuts, air track, sub base, blower, gliders, timers, photogates, cables and additional air track accessories are not included unless specified separately.
LabChoice Australia supplies Air Track Spare Parts and accessories for school science laboratories, physics classrooms, university teaching laboratories and STEM programs requiring reliable support hardware for air track motion experiments.
Law of Conservation of Mass Apparatus Bottle
AUD 64.90(Ex GST)
N-Propylthiouracil Test Paper Strips, 100 Strip Pack
AUD 12.50(Ex GST)
Porcelain Streak Plates, Unglazed Mineral Testing Tile Range, White & Black
From AUD 17.50 (Ex GST)
Square Cube Bosshead Clamp Holder
From AUD 14.90 (Ex GST)
Natural Rubber Bunsen Burner Tube, High Quality
AUD 19.90(Ex GST)
Digital DC Ammeters, Auto Power Off
From AUD 148.50 (Ex GST)
Biological Ear Model, Large 5 Part
AUD 93.50(Ex GST)
Scale Pans with Hook, Plastic, Brass and Aluminium, 75 mm
From AUD 24.90 (Ex GST)
Large Pulley with Universal Clamp, 70 mm
AUD 19.00(Ex GST)
Variable Speed Tube Rotator, Digital Display Multi Angle Up to 40 rpm
AUD 603.90(Ex GST)
You May Also Need
4 mm Banana Plug Cables, 300 mm, Moulded Stackable
From AUD 8.50 (Ex GST)
Air Table, Dynamics and Kinematics Model
From AUD 4.50 (Ex GST)
Air Track End Plug for Track Tube
AUD 5.50(Ex GST)
Air Track Foot Support for Spark and Paper Tracks
AUD 13.90(Ex GST)
Air Track Glider Attachments, Inelastic Collision Accessory Set
From AUD 78.50 (Ex GST)
Air Track Gliders for Low Friction Motion
From AUD 32.90 (Ex GST)
Air Track Replacement Parts and Accessories
From AUD 6.50 (Ex GST)
Air Track Spark Paper, Motion Recording Roll Black and White
From AUD 18.50 (Ex GST)
Banana Plugs, 4mm Laboratory Type
From AUD 14.50 (Ex GST)
Boyle’s Law Glass Tubes, Laboratory Demonstration Tube Set
From AUD 21.90 (Ex GST)
Deflagrating Spoon, 300 mm, Stainless Steel Cup with Cover
AUD 10.90(Ex GST)
Deflagrating Spoons with Aluminium Cap
From AUD 16.50 (Ex GST)
Nylon Air Track End-of-Track Pulley Attachment
AUD 20.90(Ex GST)
Pack of 4 Blue D-Cell Battery Holders for Series or Parallel Connections
AUD 13.90(Ex GST)
Replacement Hose Assembly for Air Source (Spare),2m
AUD 42.50(Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From AUD 3.90 (Ex GST)
Reagent Bottles, Wide Mouth, HDPE, Chemical-Resistant, Highly Reliable & Durable - Each
From AUD 1.50 (Ex GST)
Petri Dishes, Polypropylene, Autoclavable & Reusable, High Quality
From AUD 1.20 (Ex GST)
LATEST PRODUCTS
Air Track Plastic Foot for Lateral or Vertical Use
AUD 12.50(Ex GST)
Air Track Foot Adjusting Screw Lock Nut, Plastic
AUD 3.90(Ex GST)
Air Track Foot Adjusting Screw with Plastic Head
AUD 7.50(Ex GST)
TOP RATED PRODUCTS
Air Track Plastic Foot for Lateral or Vertical Use
AUD 12.50(Ex GST)
Air Track Foot Adjusting Screw Lock Nut, Plastic
AUD 3.90(Ex GST)
Air Track Foot Adjusting Screw with Plastic Head
AUD 7.50(Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab