Laboratory Power Supplies and Modules, Multi Function Power Module
- HV and EHV: 0-500V DC 50mA or 3kV/0/3kV DC, 3mA limited, plus 2 x 6.3V AC outputs
- Switched supplies: 2-12V AC/DC at 5-6A, 8-10A, or 15A, with overload reset and indicator LEDs
- Regulated options: Digi-Pak adds smooth 16V DC metered output, Dual Mode adds regulated 1.3-20V DC
- Special units: constant current 30mA/30V, mass-of-electron supply 250V DC, 12V AC, plus regulated 0.1-2A
- Modules: smoothing up to 8A, regulator modules 1.2-20V or 1.3-12V, Selectavolt 1.5/3/6V DC
From $21.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Laboratory Teaching Switches
- Teaching switch modules with 4 mm banana socket connections, suited to classroom wiring and circuit experiments
- Rocker switch options include SPST and SPDT types on base, rated to switch up to 10A as specified
- Transparent housing on toggle and push button types shows switching action clearly for student understanding
- DPST toggle switches two circuits together using four terminals, supports simultaneous on off control of two lines
- Push button SPST normally open provides momentary contact style operation, supports timing and control experiments
From $25.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Large Demonstration Manometer, ±300 mm Range
- Large U-tube water manometer, ±300 mm range, mm water height demonstration
- 100 × 560 mm panel with wall-hanging ring, clear classroom visibility
- 12 mm clear PVC hose U-formed, durable, easy to fill and observe levels
- 400 mm scale between legs, quick reading of level difference and direction
- Top tube ends accessible for gentle blowing or low-pressure connections, gas pressure demos
$126.00 (Ex GST)
Laser View Prism and Bar Kits
- Specially moulded plastic prisms and bars make a laser beam visible through the material path
- Prism shapes match Hodson light box kit, bars include long straight and curved new mouldings
- Bars demonstrate internal reflection and optical fibre behaviour, supports photonics curriculum teaching
- Kit options: full set 8 parts, part set 6 shapes, or bars only set with two bars
- Designed for classroom optics demonstrations where beam tracing inside solids is required
From $83.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
LDPE Dropping Bottle, Lab Dropwise Dispensing Bottle with Screw Cap
• LDPE dropping bottles for dispensing small uniform drops, supports controlled addition of liquids in lab and classroom activities
• Capacities listed 15, 30, 60, 125 and 250 mL, select volume to match reagent use and bench workflow
• Screw cap with attached cover helps reduce leakage risk and keeps dropper tip protected between uses
• Material stated low density polyethylene, suitable for lightweight, squeeze dispensing and routine laboratory handling
• Supports consistent reordering, label bottles clearly and use under appropriate supervision in educational settings
From $2.20 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Lever and Fulcrum Set with Weights and Hangers Included 1 m long
- 1 m lever and fulcrum apparatus, metre rule balances at midpoint to demonstrate moments and equilibrium.
- Knife-edge pivot at centre with V-bearing support, consistent fulcrum seating for repeatable balance tests.
- Shows moment law, weight × distance equality on both sides, clear torque comparison along the rule.
- Includes two 50 g slotted weight carriers, hook over rule edge and slide to any marked position.
- Standard slotted masses not supplied, designed to use existing school weights with supplied carriers.
$170.00 (Ex GST)
Liebig Condenser with Interchangeable Joint Socket, Borosilicate Glass (BORO 3.3)
- Restricted Item – EUD Required: For condensers with B19 ground joints or larger, an End User Declaration (EUD) must be completed. A valid photo ID (such as a Passport, Driver Licence, or Proof of Age Card) is also required. Orders will not be shipped until all documentation is received and approved.
- Straight inner tube enables efficient condensationÂ
- Interchangeable socket fits standard joint glasswareÂ
- Designed for cooling vapours in distillation setupsÂ
- Common in organic chemistry, teaching, and researchÂ
- Reliable for reflux, purification, and extractionÂ
- Made from LabChoice BORO 3.3 glass – High qualityÂ
From $37.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Loudspeakers in Protective Housing, Enclosed Laboratory Speaker
- Loudspeakers in strong housings with metal grilles, protects cones during student handling and storage
- 4 mm socket connections on each unit, supports banana plug leads for fast classroom setup
- Extension speaker options: 75 mm or 56 mm diameter, both 8 ohm impedance, reasonable fidelity output
- Wave study option: pair of 150 mm twin cone speakers, 5 W RMS, 4 ohm impedance, broad range response
- Designed for IEC Wave Lab generator use, also general purpose, includes inbuilt current limiting to reduce coil burnout risk
From $63.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Magnetic Stirrer
- Electronic variable speed control approx 150 to 1500 RPM, strong magnet stirs up to glycerine viscosity
- 200 x 180 mm rectangular top plate, alloy, plain, epoxy coated, or PTFE coated options
- Corrosion resistance via epoxy coating or PTFE (Teflon) coating, PTFE also supports easier cleaning
- Stirrer hot plate combos add heat control plus speed control, front panel mains switch and controls
-  Thermostat models adjust 50 to 320°C and maintain set temperature, simmerstat recommended for boiling
From $410.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Manual and Bench Centrifuges with Spare Tube Parts
• Hand operated 4 place centrifuge with table clamp for field work, listed for 10–15 mL tubes, handle clockwise only
• Overall length 280 mm, plastic body with metal side and clamping plates, ring ID 22 mm where plastic tube sits
• Spare 10 mL tube listed 16 mm diameter x 110 mm height, plus spare plastic outer tube option
• High speed option listed 12,000 rpm for 1.5–2.0 mL tubes, supports microtube spinning tasks
• 6,000 rpm options listed for 5 mL tubes or universal 0.5, 1.2, 1.5 and 5 mL tubes, laboratory or education use under supervision
From $2.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Manual Plastic Vacuum Pump Handheld with Built in Pressure Gauge
- Compact design for portable vacuum creationÂ
- Integrated pressure gauge for accurate readingsÂ
- Ergonomic handheld operation—no power requiredÂ
- Ideal for filtration, degassing, and lab testingÂ
- Durable plastic body resists chemical exposureÂ
- Supplied by LabChoice Australia – Reliable & efficientÂ
- Packaging: Single UnitÂ
$65.00 (Ex GST)
Measuring Cylinder Class A, Interchangeable Stopper, Round Base, Borosilicate Glass (BORO 3.3)
- Class A accuracy enables precise liquid measurementÂ
- Interchangeable stopper allows secure liquid sealingÂ
- Stable round base ensures safety during pouringÂ
- Ideal for titration, reagent prep, and quantitative workÂ
- Used in analytical, educational, and R&D laboratoriesÂ
- Made from LabChoice BORO 3.3 glass – High qualityÂ
From $28.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Measuring Cylinder Class A, Spout & Break-Resistant Collar, Borosilicate Glass (BORO 3.3)
- Class A tolerance enables precision volume analysisÂ
- Spout provides accurate, spill-free liquid dispensingÂ
- Break-resistant collar increases durability and safetyÂ
- Used for titration, dilution, and reagent measurementÂ
- Trusted in analytical, QC, pharma, and teaching labsÂ
- Made from LabChoice BORO 3.3 glass – High qualityÂ
From $11.20 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Measuring Cylinder Class B, Interchangeable Stopper, Round Base, Borosilicate Glass (BORO 3.3)
- Class B tolerance suitable for general measurementsÂ
- Interchangeable stopper allows secure closure of contentsÂ
- Round base offers stability on lab benchesÂ
- Ideal for solution prep, dilutions, and transfersÂ
- Used in education, quality control, and R&D labsÂ
- Made from LabChoice BORO 3.3 glass – High qualityÂ
From $11.20 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Measuring Cylinder Class B, Spout & Break-Resistant Collar, Borosilicate Glass (BORO 3.3)
- Class B tolerance suited for general volume estimationÂ
- Spout ensures drip-free, controlled liquid pouringÂ
- Break-resistant collar improves handling safetyÂ
- Used in research, QC, and educational environmentsÂ
- Reliable for dilutions, mixing, and solution prepÂ
- Made from LabChoice BORO 3.3 glass – High qualityÂ
From $5.20 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Measuring Cylinder, Polypropylene, Tough, Lightweight & Reusable
- Durable polypropylene construction resists breakage
- Lightweight design simplifies routine handling
- Raised graduations offer clear volume readings
- Chemical-resistant for acids, bases, and solvents
- Reusable and autoclavable for extended lab use
- Stable hexagonal base prevents tipping during use
From $2.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Measuring Jugs, Polypropylene, Reusable, Heat-Resistant, Lightweight, High Quality
- High-impact polypropylene ideal for repeated useÂ
- Raised graduations for clear, accurate readingÂ
- Wide spout allows smooth, spill-free pouringÂ
- Resistant to most chemicals and heat exposureÂ
- Lightweight and easy to handle in any labÂ
- Sturdy handle ensures safe and stable gripÂ
From $2.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Mechanical Beam Balances, MB311 and MB2610, Stainless Pan, 0.01 g or 0.1 g Divisions
• Mechanical beam balances for lab and education weighing, stable operation without electronics, easy reading beams
• MB311 model: 311 g capacity, 0.01 g division, hanging pan, stainless pan 90 mm, balance mass 1.7 kg
• MB2610 model: 2610 g capacity, 0.1 g division, three engraved beams, zero adjust and tare function
• Stainless steel weighing pans specified, MB2610 pan 150 mm, suited to larger samples and containers
• MB2610 supplied weights: 2 x 1 kg and 1 x 500 g, use under appropriate supervision in lab settings
From $180.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Melde’s Apparatus String Vibrator, 4–8 V AC Supply
- Melde’s string vibrator for standing waves, cord attaches to armature tip hole, bench-mounted clamp included.
- Cord runs along bench and over edge via pulley, hanging weight sets known tension for repeat studies.
- Pulley-on-rod adjusts so cord stays parallel to bench top, improves alignment and pattern clarity.
- Driven by high-power signal generator, armature adjusted and clamped to vibrate at set frequency.
- Produces measurable standing-wave patterns, supports frequency–wavelength relationships in string experiments.
$185.00 (Ex GST)
Melting Point Capillary Tubes, Melting Point Determination, Borosilicate Glass
- Consistent wall thickness ensures even heat distributionÂ
- Open or closed ends available for flexibilityÂ
- Retains small sample volumes for accurate testingÂ
- Suitable for TLC, purity testing, and compound IDÂ
- Used in pharma, biochemistry, plant analysis, and QCÂ
- Made from LabChoice BORO 3.3 glass – High qualityÂ
From $7.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Microscope Glass Slides One Side Frosted, Laboratory Use
- One side frosted microscope glass slides for clear labelling and sample identification
- High quality clear glass with uniform thickness for consistent optical performance
- Frosted end supports pencil or marker labelling without smudging
- Smooth polished edges for safe handling during slide preparation
- Suitable for routine microscopy in schools, universities, research, and clinical laboratories.
From $8.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Microscope Lamps, Laboratory Illumination Type
- Microscope lamps for bench illumination, options for 220/240V mains or 12V AC/DC low voltage operation
- 240V models use 25W pearl lamp with clear or blue tint front glass, blue tint compensates red content
- 12V model uses 12V 20W QI lamp with inbuilt reflector, runs cooler and provides brighter whiter beam
- Strong stainless steel stand holds lamp body, removal by firm pull to spring off stand, described as virtually unbreakable
- Cable options: 1 m two core mains lead with two pin plug, or 1 m lead with stackable 4 mm plugs and lamp to lamp plug through
From $57.60 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Microscopic Glass Slides Plain for Laboratory Use
- Plain microscopic glass slides for routine laboratory microscopy
- Clear, laboratory-grade glass for accurate sample observation
- Smooth, flat surface suitable for staining and mounting specimens
- Compatible with standard cover slips and light microscopes
- Ideal for biological, clinical, and educational applications
- Consistent quality for reliable everyday laboratory use
- Supplied by LabChoice Australia
From $10.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Millikan’s Apparatus
- Atomises latex solution into spheres
- Static charging via rubber hose
- Charged plate cell, reversible voltage
- Telescope with graticule observation
- Plate potential plus sphere velocities for electron charge calculation
From $676.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Mini Power Supply, Low Voltage Regulated Type
- Compact IEC transformer power sources with 240V mains input and fixed 6V and 12V outputs
- Available as DC only outputs for DC motors and electromagnet experiments, or AC only outputs for light box and lamps
- Total load rated 4 amps, designed for classroom and bench low voltage equipment operation
- Each output has self resetting overload protection, trips above 4 amps and resets when overload removed
- Supplied with mains power cable, AC model sized to fit reserved compartment in Hodson styrene foam housing
From $104.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Mortar Pestle Set, Porcelain, Ideal for Laboratory, Sizes Available
- Durable porcelain body resists chipping and wearÂ
- Unglazed grinding surface ensures efficient crushingÂ
- Available in multiple sizes to suit all needsÂ
- Ideal for grinding solids into fine powdersÂ
- Used in chemistry, pharma, botany, and educationÂ
- Supplied by LabChoice Australia – Trusted laboratory supplierÂ
From $8.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Motor Drive Unit with Pulley, Variable Speed Laboratory Unit
From $176.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Moulded Helmholtz Coil Pair, 150 mm Diameter, With Feet and Ruler Included
- Pair of precision Helmholtz coils, 400 turns each, designed for magnetic field strength study and uniform-field setups.
- Heat-resistant polycarbonate formers with moulded feet, stable bench placement, locates over a standard 1/2 metre rule.
- Coil spacing set using the supplied wooden rule, supports repeatable geometry and consistent field measurements.
- 4 mm spin-free IEC terminals, current direction marked on each coil for correct wiring and polarity checks.
- 1 A max current, resistance about 20 Ω cold and 25 Ω warm, highlights heating effects during operation.
$182.00 (Ex GST)
Multiple Connection Glass Bend Adapter (PIG Type) BORO 3.3
- PIG type multiple connection bend designed for complex laboratory glassware assemblies
- Allows smooth directional change while maintaining multiple joint connections
- Precision ground joints ensure leak-tight, secure fit in vacuum and pressure setups
- Suitable for synthesis, distillation, and custom reaction apparatus
- High thermal and chemical resistance for demanding lab applications
- Made from LabChoice BORO 3.3 glass – High quality
Natural Rubber Bunsen Burner Tube, High Quality
- Natural rubber Bunsen burner tube for connecting burners to laboratory gas taps
- Flexible tubing for easy fitting and reliable sealing on standard hose barbs
- Supports steady gas flow, helps reduce kinks during normal bench use
- Durable for routine heating work in school, university, and general laboratories
- Suitable for common lab gas outlets and compatible Bunsen burner fittings
- Ideal for practical classes, demonstrations, and everyday lab heating setups
$19.90 (Ex GST)
Navigation Compasses, Plotting Compasses and Class Sets
• Liquid filled orienteering compass with lens, blister packed, dimensions stated 140 x 60 x 17 mm, code 0153-01, small size also available
• Map orienteering options listed as large format and small format, small size specified 70 x 48 x 9 mm
• Plotting compass in metal frame, 18 mm diameter dial for map plotting and bearing marking tasks
• Student compasses listed 35 mm diameter, standard type and lid type, plus demonstration compass 77 mm diameter
• Classroom storage options include set of 20 in box with calibration strip, plus box only with calibration
From $2.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Norwood-Style Glass Electrodes, Set of 4, Kit Components
- Set of four sealed glass electrode tubes with protruding terminals for direct power connection
- Electrode types included, 2 carbon rods, 1 stainless steel rod, 1 platinum wire, all in glass.
- Bracket holds any two electrodes, hangs into a small beaker for stable electrolysis setup.
- Suitable for electrolysis demonstrations and comparative electrode material experiments in teaching labs.
- Glass tubes allow gas generation and collection inside tubes, making reaction products visible.
$101.00 (Ex GST)
Nylon Air Track End-of-Track Pulley Attachment
- Air track end pulley on mounting strip, provides fixed pulley point for cord-based air track experiments.
- Flat-top attachment screw included, secures strip to end fitting of air tube for stable mounting.
- Designed for end-of-track installation, supports consistent alignment and smooth cord routing.
- Simple replacement accessory for air track setups, restores pulley function at track end.
- Mounting strip format keeps pulley positioned correctly on tube end fitting during repeated runs.
$16.60 (Ex GST)
didn't see what you are looking for ?
We’ll source it or make it for you. LabChoice supports your research every step.