Nylon Pulleys, Lightweight Laboratory Model
- 50 mm nylon pulley range for mechanics experiments, supports cord redirection, load lifting studies and pulley system demonstrations
- Sheave frame options include 1 to 4 sheaves with pressed aluminium frames, strong hooks, silversteel shafts, screws and nuts for repair
- Bench mount horizontal pulley clamps to flat surfaces, max clamp thickness 25 mm, protective pad helps prevent bench damage
- Vertical adjustable pulley uses universal bench clamp opening to 40 mm, holds devices up to 12.5 mm diameter, pulley can be positioned and directed
- Pulley on anodised aluminium rod options use 8 mm x 200 mm rods, straight or bent with offset groove alignment for consistent cord path
From $15.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Oil and Water Separator Receiver Apparatus BORO 3.3 Glass
- Designed for efficient separation of immiscible oil and water phases during distillation
- Manufactured from high quality BORO 3.3 borosilicate glass for chemical and thermal resistance
- Clear visibility enables accurate observation of phase separation and volume collection
- Ideal for essential oil extraction, solvent recovery, and laboratory distillation setups
- Compatible with standard laboratory distillation assemblies and condensers
- Suitable for research laboratories, pilot setups, education, and essential oil applications
From $44.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Oscillator Generator at Very Slow Range & Low-Frequency AC Sine
- Very low frequency sine output 0.1 Hz, 10 s per cycle, ideal for slow, visible waveform demonstrations.
- Output 15 V peak-to-peak, up to 5 mA, suitable for low-current teaching circuits and indicators.
- Frequency accuracy about ±5%, supports predictable timing for lab activities and demonstration pacing.
- Press button hold, stops oscillation, locks output at 7.5 V for event synchronisation tests.
- Supports inductor phase studies and LED-based rectifier bridge operation shown in slow motion.
$140.00 (Ex GST)
Pack of 4 Blue D-Cell Battery Holders for Series or Parallel Connections
- Pack of 4 blue D-cell holders, supports series or parallel wiring for flexible DC supply setups.
- Series connection option increases voltage output, suitable for higher voltage requirements in circuits.
- Parallel connection option increases capacity, supports longer operation and higher current availability.
- Useful for teaching electrical concepts, comparing voltage versus capacity effects in simple experiments.
- D-cell format for practical classroom power, compatible with common lab and education circuit builds.
$11.10 (Ex GST)
Parafilm Sealing Film, Laboratory Grade Stretch Film for Airtight Seals
- Creates airtight, moisture-resistant laboratory sealsÂ
- Flexible and stretchable for wrapping irregular shapesÂ
- Used for flasks, test tubes, petri dishes, and beakersÂ
- Ideal for storage, microbial work, and research setupsÂ
- Prevents evaporation and contamination effectivelyÂ
- Trusted lab sealing film from LabChoice AustraliaÂ
From $55.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Pasteur Transfer Pipette, Disposable Plastic Pipette for Safe Liquid Handling, 500 pcs Box
- Safe and disposable for contamination-free transferÂ
- Soft plastic for precise, controlled dispensingÂ
- Available in 1 ml and 3 ml capacitiesÂ
- Ideal for routine sample handling and transfersÂ
- Used in pathology, research, and teaching labsÂ
- Supplied by LabChoice Australia – Reliable qualityÂ
From $26.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Pear Shaped Flask For Distillation, BORO 3.3 Glass
- Pear-shaped profile supports efficient boiling and controlled distillation of liquids
- Narrow neck design helps reduce solvent loss and improves vapour direction into the condenser
- Uniform wall thickness promotes even heat distribution and stable thermal performance
- Suitable for distillation, solvent recovery, rotary evaporation, and synthesis applications
- Compatible with heating mantles and standard laboratory setups
- Made from LabChoice BORO 3.3 glass – High quality, supplied by LabChoice Australia
From $65.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Pendulum Bobs, Assorted Size Laboratory Set
- Pendulum bobs for mechanics experiments, available as brass, steel and plastic options plus a brass set of three
- Diameter options include 25 mm brass, 20 mm brass, 12.5 mm brass, 20 mm steel and 20 mm plastic as listed
- Brass set includes 25 mm, 20 mm and 12.5 mm bobs for comparing mass and damping effects
- Each bob has through hole plus counterbored hole, knot hidden inside for tamper-proof string attachment
- Designed for repeatable pendulum length setups, supports timing and oscillation investigations in classroom use
From $2.70 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Penny Head Ground Glass Stopper, High Quality Borosilicate Glass
- Penny head shape allows easy handling and gripÂ
- Ground glass taper ensures airtight sealingÂ
- Heavy quality glass for durability and lab safetyÂ
- Used in reagent bottles, flasks, and tubing portsÂ
- Ideal for chemical storage and sample protectionÂ
- Made from LabChoice BORO 3.3 glass – High quality
From $2.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Percolation for Herbal Alcohol Extract, BORO 3.3 Glass
- Designed for percolation of herbal alcohol extracts in laboratory and botanical processing applications
- Made from BORO 3.3 borosilicate glass for reliable chemical resistance and durability
- Suitable for handling alcohol-based extraction processes with improved material stability
- Clear glass body allows easy observation of extract flow and liquid level during use
- Helps support controlled liquid passage through herbal material for consistent extraction work
- Ideal for education, research, herbal preparation, and laboratory extraction setups
From $110.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Petri Dishes, Polypropylene, Autoclavable & Reusable, High Quality
- Reusable polypropylene construction for durabilityÂ
- Autoclavable design supports high-temperature sterilizationÂ
- Resistant to acids, alkalis, and solventsÂ
- Smooth surface for optimal microbial culture growthÂ
- Available in 5 sizes for varied applications
From $1.20 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Photoelectric Effect Apparatus
- Photoelectric effect demonstration setups
- Dual meters show current and backing volts
- Current resolution down to 0.1 nanoamps
- Light source options, lamp with filters or selectable LEDs
- Caesium and antimony on silver oxide cathode coating
From $143.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Pinch Clip for Tubing, Easy Use Control for Rubber or Plastic Tubes, High Quality
- Precise flow control for tubing systemsÂ
- Compatible with rubber and plastic tubesÂ
- Quick-release mechanism for easy useÂ
- Durable build for repeated lab applicationsÂ
- Used in fluid transfer, filtration, and setup controlÂ
- Supplied by LabChoice Australia – Reliable qualityÂ
$1.90 (Ex GST)
Pipette Filler Bulb Rubber, 3 Valve Type, Precision Lab Pipetting Accessory
- Three-valve system for precise liquid controlÂ
- Rubber body provides flexibility and durabilityÂ
- Supports safe, hands-free pipetting operationÂ
- Compatible with glass and plastic pipettesÂ
- Used in research, clinical, and teaching labsÂ
- Supplied by LabChoice Australia – High performanceÂ
$12.00 (Ex GST)
Pipette Filler Bulb, Laboratory Grade, Soft, Flexible Rubber for Easy Pipetting
- Soft rubber construction ensures comfortable useÂ
- Flexible design enables smooth aspiration and dispensingÂ
- Laboratory grade quality for reliable pipettingÂ
- Compatible with glass and plastic pipettesÂ
- Used in teaching, research, and clinical labsÂ
- Trusted by LabChoice Australia – Dependable labwareÂ
From $2.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Pipette Pump, Ergonomic ABS Design for Accurate Liquid Handling, High Quality
- Ergonomic grip for fatigue-free pipettingÂ
- Accurate dispensing with one-handed operationÂ
- Durable ABS body with corrosion resistanceÂ
- Quick-release thumb wheel for precision controlÂ
- Available in 2 ml, 10 ml, and 25 ml volumesÂ
- Supplied by LabChoice Australia – Trusted performanceÂ
From $19.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Pipette Stand Detachable, Holds 12 Pipettes, Lab-Grade Design, High Quality
- Holds up to 12 pipettes verticallyÂ
- Detachable design for easy assembly and cleaningÂ
- Stable base prevents tipping and contaminationÂ
- Suitable for glass and plastic pipettesÂ
- Organizes workbench and protects equipmentÂ
- Constructed from durable, lab-grade materialsÂ
$9.50 (Ex GST)
Plain Desiccator, Polypropylene Body for Moisture Free Sample Storage, High Quality
- lene, Durable Base for Round Bottom or Flat-Bottom Flasks lene, Durable Base for Round Bottom or Flat-Bottom
- Flasks Chemically resistant polypropylene for durabilityÂ
- Designed for ambient pressure desiccationÂ
- Provides moisture-free environment for samplesÂ
- Lightweight, corrosion-proof constructionÂ
- Used in labs for storage and drying tasks
From $64.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Plastic Coated Wire Bottle Carrier
• Wire bottle carrier holds two 2.5 L Winchester bottles, stable dual-bay transport for labs.
• Epoxy coated plastic-coated frame, improved durability for routine handling and bench transfer tasks.
• Overall size 345 × 185 × 185 mm high, compact footprint while supporting two large bottles.
• 215 mm carry handle, easy lifting and controlled movement of filled bottles in lab environments.
• Each bay 170 × 170 mm, suits 2500 mL bottle placement, supervised laboratory or educational use only.
$56.00 (Ex GST)
Plastic Spectroscope with Calibration Scale and Adjustable Slit
- Compact direct-vision spectroscope for viewing spectra and estimating wavelength using calibrated nm scale.
- Adjustable entrance slit controls light level and band sharpness for clearer spectral separation.
- Eyepiece fitted with 600 line/mm grating to disperse light into colour and wavelength components.
- Spectrum viewed against nanometre scale, each digit represents 100 nm for quick classroom readings.
- Black chamber improves viewing conditions by limiting stray light during spectroscopy demonstrations.
$55.00 (Ex GST)
Polaroid Polarising Filters
- Polaroid filters for polarisation studies, supplied as pairs for crossed and aligned transmission demonstrations
- Standard square pair sizes: 50 x 50 mm, 75 x 75 mm, 100 x 100 mm
- Film thickness is 0.18 mm across the range for consistent optical handling and cutting
- Sheet option provides 300 x 300 mm equivalent area for user-cut pieces, may not be one piece
- Bench mount option: rotating graded disc, 50 mm filter, measures transmission change from maximum to zero at 90 degrees
From $18.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Polypropylene Aspirator Bottles, Autoclavable PP with Stopcock Tap
• Polypropylene aspirator bottles with stopcock or tap, autoclavable material stated as PP
Capacity options listed: 5 litre, 10,000 mL, 20,000 mL, plus spare tap that fits all sizes
• Use described for sedimentation of suspended solids, then controlled draining of liquid to a collection flask
• Brand stated as Polylab, suitable for routine lab handling and repeat use workflows
• Dimensions provided approximately 360 mm high x 165 mm wide, capacity not specified for the stated dimensions
From $12.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Polypropylene Draining Baskets, Autoclavable, With or Without Lid
• Wide polypropylene draining baskets for holding and draining laboratory apparatus after washing and rinsing
• Material specified as polypropylene (PP), described as autoclavable for sterilisation in standard lab workflows
• Typical cycle stated for empty PP containers: 121°C at 15 psi for at least 15 minutes
• Free air circulation recommended during autoclave venting and cooling to support safe, even processing
• Size and lid options listed, including white no-lid basket and lidded baskets for covered handling
From $8.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Porcelain Combustion Boats, Heavy Duty Unglazed Laboratory Type (Pack of 100)
• Unglazed porcelain combustion boats for laboratory chemical analysis work, supports heating and sample handling
• Porcelain described as highly heat resistant, helps reduce risk of cracking or deformation during heating steps
• Boat weight helps keep the boat steady, reducing unwanted spillage during analytical processes
• Pack quantity 100 pieces, pack details listed as 90 x 70 x 160 mm and 0.68 kg
• Sizes listed 72, 77, 88, 95, 97 mm with dimensions provided, sizes approximate and may vary due to manufacturing shrinkage
From $17.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Porcelain Evaporating Basins, Round Bottom with Spout, 15 mL to 1000 mL
• Porcelain round bottom basins with pouring spout, supports controlled decanting during routine lab work
• Wide capacity range from 15 mL to 1000 mL, supports small scale to larger volume handling requirements
• Round bottom profile suits stable mixing and handling, spout assists transfer to beakers and containers
• Size data provided for 15 mL model C46-1: 47 mm rim diameter and 20 mm height
• For laboratory or educational settings only, select capacity to match experiment volume and use under supervision
From $2.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Powell’s Pattern Wave Motion Apparatus with Rotatable Scale Indicator
- Powell’s wave motion demonstrator, moulded mechanism, smooth and quiet turning for classroom viewing.
- Shows transverse wave motion, particle motion perpendicular to wave direction, clear visual pattern.
- Shows longitudinal wave motion, particle motion parallel to wave direction, compare against transverse.
- Handle scale 0–360°, tracks one full cycle, supports phase and angle correlation activities.
- Cam rotation drives sine-wave action, relate angle to wave position during step-by-step rotation.
$176.00 (Ex GST)
Pressure Equalizing Funnel, Clear, Ungraduated with Glass Stopcock, Borosilicate Glass (BORO 3.3)
- Maintains pressure balance during reagent transferÂ
- Glass stopcock enables controlled, dropwise flowÂ
- Ungraduated body ensures full visual monitoringÂ
- Ideal for reflux setups, synthesis, and titrationÂ
- Used in organic chemistry, pharma, and researchÂ
- Made from LabChoice BORO 3.3 glass – High qualityÂ
From $34.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
PSSC 2D Collision Dynamics Practical Kit
- Bench-clamp 2D collision kit, angled ball impacts for momentum and vector component analysis.
- Different mass ball collisions supported, compare outcomes under controlled geometry and repeated trials.
- Carbon paper impact marks, clear floor record of landing points for measurement and calculations.
- Plumb bob zero reference, fixed origin improves distance and angle accuracy across student groups.
- Measures distances and angles to impact points, supports classroom dynamics laws and discussion work.
$41.00 (Ex GST)
PSSC Helical Steel Spring Kit
- Coil spring with eye ends for retort-stand suspension, quick setup for Hooke’s law extension tests.
- Includes plated steel masses 0.5 kg and 1 kg, use singly or together for stepped loading.
- Extension measured by rule or tape, supports force–extension plotting and proportionality checks.
- Optional mass verification by weighing for improved accuracy in calculated forces and comparisons.
- Simple basic PSSC kit for classroom mechanics, elastic behaviour, spring response under load demonstrations.
$70.00 (Ex GST)
PSSC Inertial Balance Experiment Kit
- Inertial balance kit demonstrates mass from oscillation frequency, clarifies mass versus weight concept.
- Fixed plate clamps to table, second overhanging plate oscillates horizontally via spring blade connection.
- Add masses to oscillating plate to change frequency, compare oscillation timing between different loads.
- Masses can sit on plate or be separately supported by cord, supports different loading approaches.
- Stopwatch timing method for oscillations, simple frequency comparison for classroom mechanics practicals.
$62.00 (Ex GST)
PSSC Small Current Balance Experiment Kit, Solenoid Not Included
- Platform attaches to IEC air cored solenoid end cheek, direct-fit mount for balance experiments.
- Slim blade with single-turn conductor, balanced on sensitive pivots between two platform support rods.
- Current in solenoid and conductor produces magnetic interaction, blade deflects, shows force on conductor.
- Add small weights to restore balance, required mass quantifies force for analysis during practicals.
- Demonstrates motor principle, force on current-carrying conductor inside magnetic field, foundational electricity and magnetism.
$67.00 (Ex GST)
PTFE Cross Stir Bar 38 x 38 mm, Stable General Purpose Stirring
• PTFE cross stir bar for magnetic stirring, 38 x 38 mm size, general purpose laboratory mixing applications
• Cross profile designed for extra stability on vessel bases, helps reduce jumping and loss of coupling
• Suitable for routine stirring tasks where standard cylindrical bars may chatter at higher speeds or in turbulence
• PTFE construction supports chemical resistance and simple cleaning between different solutions or reagents
• Use in laboratory or educational settings only, match stirrer size to vessel diameter and stirrer motor strength for best control
$11.00 (Ex GST)
PTFE Octahedral Stir Bar 5.5 x 42 mm, Turbulence at Low Speed
• PTFE octahedral magnetic stir bar, size 5.5 x 42 mm, designed for general laboratory stirring
• Profile described as similar to pivot ring type, but promotes more turbulence at low stirring speed
• Useful where mixing is needed at lower RPM, supports agitation without requiring high speed operation
• PTFE construction supports chemical resistance and easy cleaning between different solutions or reagents
• For laboratory or educational settings only, use under supervision and match bar length to vessel size and stirrer strength
$11.00 (Ex GST)
didn't see what you are looking for ?
We’ll source it or make it for you. LabChoice supports your research every step.