Surgical Blades, Laboratory Cutting Blade Range Pack of 100
From $27.50 (Ex GST)
From $27.50 (Ex GST)
- Surgical blade pack for laboratory and educational cutting tasks
- Supplied as a pack of 100 pieces for lab and classroom stock use
- Single-use blade format supports controlled preparation workflows
- Suitable for supervised trimming, cutting and sample preparation tasks
- Sterility is not guaranteed if the packet is broken
- Extremely sharp blades, handle carefully with suitable PPE
- Intended for laboratory or educational use under appropriate supervision
- Description
Description
The Surgical Blades, also known as laboratory cutting blades, are designed for controlled cutting, trimming and preparation tasks in laboratory and educational environments. They are suitable for school science laboratories, university teaching laboratories, biology laboratories, microscopy preparation areas and supervised practical workspaces. These blades are supplied as a pack of 100 pieces, supporting laboratory stock control, preparation room use and repeated classroom practical requirements. The pack format is suitable where multiple single-use blades are required for routine laboratory preparation workflows.
The blades are specified as single use. This supports controlled handling practices where a fresh blade is required for each suitable task, helping reduce cross-use between applications and supporting organised laboratory procedures. The supplied safety note states that sterility is not guaranteed if the packet is broken. Users should check packaging condition before use and confirm suitability for the intended laboratory or educational task. These blades are extremely sharp and must be handled with care. Users should wear suitable personal protective equipment, avoid direct contact with the cutting edge, use an appropriate cutting surface and keep blades away from unauthorised handling. Used blades should be disposed of through a suitable sharps container or approved blade disposal system according to local laboratory procedures. They should not be placed loose in general waste.
LabChoice Australia supplies Surgical Blades for biology laboratories, microscopy preparation areas, school science departments, university teaching laboratories and supervised laboratory workspaces. They are suitable for controlled cutting, trimming and sample preparation tasks in laboratory or educational settings only, under appropriate supervision.
Electrostatic Pith Balls, Laboratory Charge Study Model
From $12.50 (Ex GST)
Simple Heating Mantles, Controlled Heating for Round Bottom Flasks
From $311.50 (Ex GST)
Free Fall Apparatus, Mechanical and Solenoid Release
From $355.50 (Ex GST)
Adam Polaris Semi-Micro and Analytical Balances for Precision Lab Weighing
From $3,420.00 (Ex GST)
Flow Control Bend Adapter with PTFE Stopcock, BORO 3.3 Glass, Laboratory Grade
From $24.90 (Ex GST)
High-Sensitivity Digital Electrometer for Low-Charge Measurement
$516.50(Ex GST)
High Power Signal Generator, 0.1 Hz to 100 kHz
$621.90(Ex GST)
You May Also Need
Bibulous Paper Sheets 4 × 6 in, Book of 50 Sheets
$31.50(Ex GST)
Blue Nitrile Gloves, Powder Free - Small, Medium, Large Size
From $9.90 (Ex GST)
Kimtech Disposable Wipes, Delicate Lab Task Wipes
From $9.20 (Ex GST)
Single Edge Razor Blades, Pack of 100
$27.50(Ex GST)
Wooden Lab Disposable Stirrer - 114 x 10 x 2 mm
From $19.90 (Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Polypropylene Filter Funnels, 50 mm to 150 mm Range
From $1.50 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From $3.90 (Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab
