E
x
p
l
o
r
e
M
o
r
e
:
Electrochemistry Meters & Analysers
Luminescent Sensor Cap DO8032 for Optical DO Probes
AUD 405.00(Ex GST)
AUD 405.00(Ex GST)
- Replacement luminescent sensor cap for compatible optical dissolved oxygen probes
- Suitable for DO803 and DO810 optical DO probe maintenance
- Helps maintain measurement accuracy and reliability when replaced at the correct service interval
- Listed service life of 8000 hours under normal use conditions
- Designed for optical DO meter users who need scheduled probe cap replacement
- Swift replacement process helps reduce manual data-entry errors during sensor cap installation
[request_quote_button]
- Description
Description
Luminescent Sensor Cap DO8032 for Optical DO Probes is a replacement sensor cap used with compatible optical dissolved oxygen probes. It is an essential maintenance component for keeping optical DO measurement systems working accurately and reliably.
This cap is suitable for DO803 and DO810 optical DO probes. It is designed to be replaced when the sensor cap reaches its service interval or when measurement performance requires cap replacement.
The listed service life is 8000 hours. Replacing the cap on time helps support stable dissolved oxygen measurement and helps prevent unreliable readings caused by an aged or worn optical sensing cap. Traditional sensor cap replacement can require users to enter multiple data values manually, which may take time and increase the chance of input errors. This replacement system is designed to simplify the process using a data box connection and flash drive installation program.
With the supported installation process, users can complete the sensor cap replacement in approximately 2 minutes. This is useful for laboratories and field users who need quick probe maintenance with reduced manual setup work. This sensor cap is suitable for optical DO meter users in water testing, environmental monitoring, aquaculture, education, research and routine laboratory measurement workflows.
LabChoice Australia supplies optical dissolved oxygen probe accessories, replacement sensor caps and meter maintenance parts for laboratories, field testing teams and water-quality monitoring applications.
Features
- Model: DO8032 Luminescent Sensor Cap
- Product type: Replacement optical DO sensor cap
- Compatible probe models: DO803 and DO810 Optical DO Probes
- Sensor technology: Luminescent optical dissolved oxygen sensing cap
- Service life: 8000 hours
- Replacement purpose: Maintains optical DO probe accuracy and reliability
- Installation support: Data box and flash drive installation method
- Replacement time: Approximately 2 minutes using the supplied installation process
- Suitable use: Optical dissolved oxygen probe maintenance
- Application area: Laboratory, water testing, environmental monitoring and field DO measurement
Energy Conversion Kit with Generator, Solar Panel and Loads
AUD 136.90(Ex GST)
Air Track Flat Loop Springs, Stainless Steel
From AUD 10.90 (Ex GST)
Burette Draining & Storage Rack, 12 Place
AUD 62.50(Ex GST)
Visking Dialysis Tubing, Laboratory Membrane Tubing for Diffusion Work
From AUD 134.50 (Ex GST)
Digital Newton Meter for Push and Pull Force Measurement
AUD 122.50(Ex GST)
Digital Dry Block Heater, Dual Block, 200°C
AUD 1,532.00(Ex GST)
Borosilicate Glass Crystallizing Dishes with Spout
From AUD 13.90 (Ex GST)
Litmus Test Paper Strips, Blue, Red and Neutral
From AUD 6.90 (Ex GST)
You May Also Need
Save 10%
Benchtop Touch Screen Multi-Parameter Meter for pH and Conductivity Testing
From AUD 3,146.90 (Ex GST)
Calcium Ion Sensor, Replacement Sensor with 0.1 to 5.0 mmol/L Range
AUD 528.00(Ex GST)
Digital pH Pen Meters, 0 to 14 pH
From AUD 34.90 (Ex GST)
Fluoride Sensor, Replacement Sensor with 0.3 mL Direct Measurement
AUD 227.70(Ex GST)
Nitrate Ion Electrode, Replacement Sensor with Selective Flat Electrode
AUD 227.70(Ex GST)
pH Sensor, Replacement Flat Sensor for Pocket pH Meters
AUD 143.00(Ex GST)
Pocket Ionized Calcium Meter, Cow Side Blood Testing with 0.3 mL Sample Volume
AUD 2,183.50(Ex GST)
Pocket Nitrate Ion Meter, 0.3 mL Sample Testing with Up to 2 Calibration Points
AUD 1,314.50(Ex GST)
Pocket ORP and Eh Meter, 0.3 mL Sample Testing with Backlit LCD
AUD 478.50(Ex GST)
Save 10%
Portable Multi-Parameter Meters for pH, Conductivity and Dissolved Oxygen Testing
From AUD 1,723.50 (Ex GST)
Potassium Ion Sensor, Replacement Sensor with 4 to 9900 ppm Range
AUD 227.70(Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Petri Dishes, Polypropylene, Autoclavable & Reusable, High Quality
From AUD 1.20 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From AUD 3.90 (Ex GST)
Laboratory Beaker, Low Form, Graduated with Spout, Borosilicate Glass (BORO 3.3)
From AUD 2.00 (Ex GST)
LATEST PRODUCTS
Luminescent Sensor Cap DO8032 for Optical DO Probes
AUD 405.00(Ex GST)
Dissolved Oxygen Probe DO803 Luminescent Optical
AUD 1,650.00(Ex GST)
Conductivity/Temperature Electrode DJS-0.1-S Low-Range, 8-Pin Connector
AUD 425.00(Ex GST)
TOP RATED PRODUCTS
Luminescent Sensor Cap DO8032 for Optical DO Probes
AUD 405.00(Ex GST)
Dissolved Oxygen Probe DO803 Luminescent Optical
AUD 1,650.00(Ex GST)
Conductivity/Temperature Electrode DJS-0.1-S Low-Range, 8-Pin Connector
AUD 425.00(Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab