E
x
p
l
o
r
e
M
o
r
e
:
Electrochemistry Meters & Analysers
EC Probe Replacement EC60-E for EC60 Pocket Conductivity/TDS/Salinity Tester
AUD 85.00(Ex GST)
AUD 85.00(Ex GST)
- Replacement EC probe designed for the EC60 Pocket Conductivity/TDS/Salinity Tester
- Also compatible with the PC60 pH/Conductivity Pocket Tester
- Suitable for routine conductivity, TDS and salinity testing in compatible regular water solutions
- Practical choice for hydroponics, tap water, drinking water, pools, spas and water-treatment workflows
- Helps extend the usable life of compatible tester bodies when the original probe reaches end of service life
- Built-in temperature sensor supports temperature-linked measurement on compatible tester units
[request_quote_button]
- Description
Description
EC Probe Replacement EC60-E for EC60 Pocket Conductivity/TDS/Salinity Tester, also known as a replacement conductivity probe, is designed to replace the original sensor on compatible EC60 pocket tester units.
This replacement probe is suitable for regular water-solution testing where users need conductivity, TDS and salinity measurement through a compatible handheld tester. It is also compatible with the PC60 pH/Conductivity Pocket Tester. The EC60-E uses a brush-resistant platinum black sensor designed to support accurate conductivity measurement across a wide range. This sensor format helps support stable EC testing in routine water-quality workflows.
The built-in temperature sensor supports temperature-linked measurement when used with compatible tester units. This is important for conductivity-based testing because EC readings can change with sample temperature. Replacing the probe can help extend the usable life of the tester body when the original sensor has aged, become damaged or no longer provides stable readings.
Users should follow the correct installation, calibration, rinsing and cleaning procedure after fitting the replacement probe. Conductivity cells should be kept clean to support stable readings, especially after testing samples that may leave residue.
LabChoice Australia supplies EC replacement probes and tester accessories for schools, universities, hydroponic users, aquaculture teams, pool and spa users, water-treatment teams and routine water-quality testing workflows.
Features
- EC60-E replacement probe
- Compatible with EC60 Pocket Conductivity/TDS/Salinity Tester
- Also compatible with PC60 pH/Conductivity Pocket Tester
- Brush-resistant platinum black sensor
- BPB conductivity sensor design
- Built-in temperature sensor
- Designed for regular water-solution testing
- Supports conductivity measurement on compatible testers
- Supports TDS testing on compatible testers
- Supports salinity testing on compatible testers
- Suitable for wide-range conductivity measurement
- Probe installation, calibration routine, cell cleaning, temperature compensation and sample suitability should be confirmed before use
Warranty
This electrode is covered for defects in material and workmanship for six months from delivery, subject to the manufacturer’s warranty terms.
The limited warranty does not cover issues caused by accidental damage, improper use, normal wear and tear, transport, storage, failure to follow product instructions, unauthorised maintenance, unauthorised modification, unauthorised repair, incompatible use with other products or materials, abuse, accidents or external causes beyond reasonable control.
Tripod Stand with Wire Gauze Mat Kit, Laboratory Heating Support
AUD 12.90(Ex GST)
IEC Simmerstat Magnetic Stirrer Hot Plate with PTFE Coated
Silicone Oil TN400-S3 for Turbidity Sample and Standard Vials
AUD 30.00(Ex GST)
Trundle Wheels, Plastic Distance Measuring Type
From AUD 68.50 (Ex GST)
Cast Iron Bar Breaker Rods, Pack of 10
AUD 15.90(Ex GST)
Beaker Polypropylene, Blue Printed Graduation, Autoclavable Lab Beaker, High Quality
From AUD 2.50 (Ex GST)
Digital Xenon Stroboscopes, XE and XEH Models
From AUD 656.50 (Ex GST)
High-Speed Microcentrifuge with Multi Rotor, up to 15,000 rpm
AUD 3,102.00(Ex GST)
Electron Charge-to-Mass Apparatus with Tube, Solenoid Not Included
AUD 232.90(Ex GST)
You May Also Need
Save 10%
Benchtop Classical Series Multi-Parameter Meter for pH, Conductivity and DO Testing
From AUD 2,467.50 (Ex GST)
Digital pH Pen Meters, 0 to 14 pH
From AUD 34.90 (Ex GST)
Fluoride Sensor, Replacement Sensor with 0.3 mL Direct Measurement
AUD 227.70(Ex GST)
Multi Function Soil Meters with Stem Probes
From AUD 24.90 (Ex GST)
Pocket Ionized Calcium Meter, Cow Side Blood Testing with 0.3 mL Sample Volume
AUD 2,183.50(Ex GST)
Pocket Nitrate Ion Meter, 0.3 mL Sample Testing with Up to 2 Calibration Points
AUD 1,314.50(Ex GST)
Pocket Nitrate Ion Meter, Single-Drop On-Site Testing
AUD 764.50(Ex GST)
Pocket ORP and Eh Meter, 0.3 mL Sample Testing with Backlit LCD
AUD 478.50(Ex GST)
Save 10%
Pocket Testers with Bluetooth for Portable pH, ORP and Water Testing
From AUD 397.50 (Ex GST)
Save 10%
Portable Single Parameters for pH, ORP, Conductivity and DO Testing
From AUD 1,435.50 (Ex GST)
Potassium Ion Sensor, Replacement Sensor with 4 to 9900 ppm Range
AUD 227.70(Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Petri Dishes, Polypropylene, Autoclavable & Reusable, High Quality
From AUD 1.20 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From AUD 3.90 (Ex GST)
Laboratory Beaker, Low Form, Graduated with Spout, Borosilicate Glass (BORO 3.3)
From AUD 2.00 (Ex GST)
LATEST PRODUCTS
TOP RATED PRODUCTS
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab