E
x
p
l
o
r
e
M
o
r
e
:
Electrochemistry Meters & Analysers
Chloride Ion Selective Electrode Kit, Combination, 1 m Cable
AUD 1,475.00(Ex GST)
AUD 1,475.00(Ex GST)
- Combination chloride ion selective electrode kit for Cl⁻ measurement workflows
- Supplied with 1 chloride electrode tip for compatible electrode operation
- Includes 100 ppm and 1000 ppm chloride ion calibration standards
- Supplied accessories include syringe, dropper, protective pipe, abrasive sheet and manual
- 1 m cable with BNC connection compatibility for suitable pH / ION meters
- 1M potassium nitrate solution requirement should be confirmed for ISAB and filling solution use
[request_quote_button]
- Description
- Datasheets & Manuals
Description
Chloride Ion Selective Electrode Kit, Combination, 1 m Cable, also known as a chloride ISE kit, is designed for laboratories that need targeted chloride ion measurement using a compatible pH / ION meter.
This kit is suitable for water-quality testing, environmental analysis, education, research and routine laboratory workflows where chloride concentration needs to be measured using an ion-selective method. It supports users who require concentration-based chloride readings after calibration with appropriate standards. Ion selective electrodes respond to the activity of selected ions in the test liquid and are used with compatible meter systems for direct ion concentration measurement after proper calibration. Consistent sample preparation, stable temperature conditions and correct electrode handling are important for dependable measurement performance.
Included with this Chloride Ion Selective Electrode Kit: 1 Chloride Electrode Tip, 100 ppm Calibration Standard and 1000 ppm Calibration Standard.
Suitable for pH / ION Meters: This chloride ISE kit is designed for use with compatible pH / ION meters for chloride ion measurement workflows.
Note: The supplied information states that 1M potassium nitrate solution, 1M KNO₃, is required for the ISAB and filling solution for the chloride ISE. It also contains package details listing chloride electrode filling solution and chloride ionic strength adjustor, so the final supplied inclusions should be confirmed before ordering.
LabChoice Australia supplies Chloride Ion Selective Electrode Kits for schools, universities, environmental testing laboratories, water-quality teams and research facilities requiring chloride ion measurement using compatible pH / ION meter systems.
Features
- Chloride Cl⁻ ion selective electrode kit
- Combination ion selective electrode format
- 1 m cable included
- BNC connector included
- Suitable for compatible pH / ION meters
- Includes chloride electrode tip, 1 pc
- Includes 1000 mg/L chloride ion standard solution, 50 mL
- Includes 100 mg/L chloride ion standard solution, 50 mL
- Includes chloride electrode filling solution, 50 mL, as listed in supplied package information
- Includes chloride ionic strength adjustor, 50 mL, as listed in supplied package information
- Includes syringe
- Includes disposable dropper
- Includes protective pipe
- Includes water-resistant abrasive sheet
- Includes manual
- 1M potassium nitrate solution, 1M KNO₃, is referenced as required for the chloride ISE
- Supplied filling solution and ISAB status should be confirmed before ordering because the supplied information contains both inclusion and exclusion notes
| Specification | Details |
|---|---|
| MODEL | 6560S-10C |
| Measurement Range | 0.35 – 35,000 mg/L Cl–
1 x 10-5 – 1 mol/L Cl– |
| Temperature Range | 0 – 50°C |
| pH Range | pH 3 – 11 (350 mg/L Cl-) |
| Accuracy | ±2% |
| Internal Electrode | Ag/AgCl |
| Internal Solution | 1 mol/L KNO3 |
| Liquid Junction | Movable sleeve |
| Connector & Cable Length | BNC, 1m |
| Dimensions | 150mm (length), 16.5mm (diameter) |
| Wetted Part Materials | PVC, PSU, AgCl |
| Slope | -53 to -62 mV/decade |
| Selection Coefficient | S2O32-, S2-, I–, Ag+, Hg2+ = Not acceptable
SCN– = 0.3, MnO4- = 0.1, Br– = 0.03 NO3–, F–, HCO3–, SO42-, PO42- = 1000 |
| Package Contents | Chloride Ion Electrode Tip 1000 mg/L Chloride Ion Standard Solution (50ml) 100 mg/L Chloride Ion Standard Solution (50ml) Syringe Dropper Protective Pipe Water-resistant abrasive sheet Manual |
| Accessories and Solutions | |
| 7660S | Chloride Ion Electrode Tip |
| 500-CL-SL | 100 mg/L Chloride Ion Standard Solution (500ml) |
| 500-CL-SH | 1000 mg/L Chloride Ion Standard Solution (500ml) |
Datasheets & Manuals
Document :
Product Information Sheet(Pdf)
Photoelectric Cell Base with Terminals and 90CG Tube
AUD 178.50(Ex GST)
Electric Kinetic Theory Model for Gas Molecule Motion
AUD 356.50(Ex GST)
Distilling Flask with Side Arm Jointed BORO 3.3 Glass
From AUD 21.90 (Ex GST)
Simmerstat Hot Plates
From AUD 580.90 (Ex GST)
In-Line Mini DC Voltmeter, ±25 V Digital Meter
AUD 124.50(Ex GST)
Simple Copper–Constantan Thermocouple, 200 mm Length
AUD 9.90(Ex GST)
Claisen U-Shaped Head Adapter BORO 3.3 Glass Laboratory Grade
From AUD 39.90 (Ex GST)
Nylon Pulleys for Bench Clamp and Rod Mounting, 50 mm
From AUD 24.50 (Ex GST)
Double Jaw Retort Clamp with 360° Swivel
AUD 28.90(Ex GST)
Hand-Wound Motor/Generator Unit for U-Core Assemblies
AUD 214.50(Ex GST)
You May Also Need
Save 10%
Benchtop Touch Screen Multi-Parameter Meter for pH and Conductivity Testing
From AUD 3,146.90 (Ex GST)
Conductivity Sensor, 0 µS/cm to 199.9 mS/cm Measurement Range
AUD 143.00(Ex GST)
Fluoride Sensor, Replacement Sensor with 0.3 mL Direct Measurement
AUD 227.70(Ex GST)
Multi Function Soil Meters with Stem Probes
From AUD 24.90 (Ex GST)
pH Sensor, Replacement Flat Sensor for Pocket pH Meters
AUD 143.00(Ex GST)
Pocket Nitrate Ion Meter, 0.3 mL Sample Testing with Up to 2 Calibration Points
AUD 1,314.50(Ex GST)
Pocket Nitrate Ion Meter, Single-Drop On-Site Testing
AUD 764.50(Ex GST)
Save 10%
Portable Single Parameters for pH, ORP, Conductivity and DO Testing
From AUD 1,435.50 (Ex GST)
Potassium Ion Sensor, Replacement Sensor with 4 to 9900 ppm Range
AUD 227.70(Ex GST)
Salt EC Sensor, 0.12 mL Sample Testing with Ti/Pt Black Cell
AUD 143.00(Ex GST)
Sodium Ion Electrode, Replacement Sensor with 2 to 9900 ppm Range
AUD 227.70(Ex GST)
[porto_related_products_slider]
Recently Viewed Products
SELECT OPTIONS
Calcium Ion Selective Electrode Kit, Combination, 1 m Cable
AUD 1,475.00(Ex GST)
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Petri Dishes, Polypropylene, Autoclavable & Reusable, High Quality
From AUD 1.20 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From AUD 3.90 (Ex GST)
Reagent Bottles, Wide Mouth, HDPE, Chemical-Resistant, Highly Reliable & Durable - Each
From AUD 1.50 (Ex GST)
LATEST PRODUCTS
TOP RATED PRODUCTS
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab