E
x
p
l
o
r
e
M
o
r
e
:
Parts & Accessories
Air Table Puck Weight Sets, for air table setups
From AUD 18.50 (Ex GST)
From AUD 18.50 (Ex GST)
- Brass weight set accessories for compatible air table pucks
- Available to fit large air table pucks
- Available to fit small air table pucks
- Used to change puck mass during air table experiments
- Supports momentum, collision and motion investigations
- Useful for comparing motion with different puck masses
- Practical spare or replacement accessory for classroom air table setups
- Suitable for school, university and teaching laboratory use
- Confirm puck size and weight fit before ordering
- Weight set only, pucks and air table are not included
- Keep hands clear of moving pucks during use
- Use under appropriate laboratory or educational supervision
[request_quote_button]
- Description
Description
The Air Table Puck Weight Sets, Large and Small, also known as air table puck mass sets, are designed for use with compatible air table pucks during physics and mechanics experiments. These brass weight sets allow users to change the mass of compatible pucks, supporting practical demonstrations where mass affects motion, momentum and collision behaviour. The range includes one brass weight set designed to fit large air table pucks and one brass weight set designed to fit small air table pucks. These accessories are useful for lessons involving momentum, inertia, acceleration, collision comparisons, kinetic behaviour and low-friction motion on an air table.
Students can compare how pucks with different added mass respond under similar experimental conditions, helping support observation-based mechanics teaching. Users should confirm puck size, weight fit, attachment method, air table setup and approved experiment procedure before ordering or use. The weights should be fitted securely before the activity begins. Do not use if the weights are loose, damaged or incompatible with the selected puck. Keep hands, loose clothing and other objects clear of moving pucks during air table operation.
Small brass weights should be handled carefully and stored securely when not in use to reduce loss, drop hazards and small-part risks. This product is intended for laboratory or educational settings only and should be used under appropriate teacher or laboratory supervision. This item is supplied as the selected brass weight set only. Air table, pucks, blower, magnets, collision bands, joining spring, pivot pin, timer, worksheets and additional accessories are not included unless specified separately.
LabChoice Australia supplies Air Table Puck Weight Sets and accessories for school science laboratories, physics classrooms, university teaching laboratories and STEM programs requiring practical equipment for low-friction motion and momentum experiments.
Caps for Schlenk Flasks BORO 3.3 Glass
AUD 32.95(Ex GST)
Pendulum Bobs, Brass, Steel and Plastic, Multiple Sizes
From AUD 3.50 (Ex GST)
Digital Geiger Counter, LCD Time and Rate, Without Tube
AUD 530.90(Ex GST)
Electronic Titrator with Touchscreen and Data Traceability
From AUD 2,857.00 (Ex GST)
Polypropylene Carboys with Caps - Each
From AUD 102.50 (Ex GST)
Student Gyroscope Kit for Inertia and Precession
AUD 47.50(Ex GST)
Polypropylene Double Separatory Funnel Holder
AUD 16.50(Ex GST)
Polypropylene Rack Float 16 Place for 1.5 mL Tubes
AUD 34.90(Ex GST)
Separating Funnel Kit PTFE Stopcock with SS Retort Ring, BORO 3.3 Glass
From AUD 69.90 (Ex GST)
Compact Vacuum Pressure Pump for Laboratory Filtration
AUD 94.90(Ex GST)
You May Also Need
Air Track Gliders for Low Friction Motion
From AUD 32.90 (Ex GST)
Air Track Installation & User Manual
From AUD 6.90 (Ex GST)
Air Track Over-Track Photogate with Leg Supports
AUD 170.50(Ex GST)
Air Track Replacement Parts and Accessories
From AUD 6.50 (Ex GST)
Air Track Replacement Velcro Strips, 20 × 75 mm, 2 Pairs
AUD 4.90(Ex GST)
Air Track Springs, Laboratory Motion Accessory Type
From AUD 4.90 (Ex GST)
Alligator Clips, 4 mm Banana Plug Shank, Pack of 10
From AUD 15.90 (Ex GST)
Banana Plugs, 4mm
From AUD 5.50 (Ex GST)
Boyle’s Law Apparatus Parts and Spares
From AUD 13.50 (Ex GST)
Boyle’s Law Glass Tubes, Laboratory Demonstration Tube Set
From AUD 21.90 (Ex GST)
Brass Filter Pump with Non-Return Valve
From AUD 77.50 (Ex GST)
Cast Iron Bar Breaker Rods, Pack of 10
AUD 15.90(Ex GST)
Pack of 4 Blue D-Cell Battery Holders for Series or Parallel Connections
AUD 13.90(Ex GST)
Replacement Hose Assembly for Air Source (Spare),2m
AUD 42.50(Ex GST)
Support Rack for Radiation Source and Absorber Alignment
AUD 46.90(Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From AUD 3.90 (Ex GST)
Reagent Bottles, Wide Mouth, HDPE, Chemical-Resistant, Highly Reliable & Durable - Each
From AUD 1.50 (Ex GST)
Petri Dishes, Polypropylene, Autoclavable & Reusable, High Quality
From AUD 1.20 (Ex GST)
LATEST PRODUCTS
Air Track Plastic Foot for Lateral or Vertical Use
AUD 12.50(Ex GST)
Air Track Foot Adjusting Screw Lock Nut, Plastic
AUD 3.90(Ex GST)
Air Track Foot Adjusting Screw with Plastic Head
AUD 7.50(Ex GST)
TOP RATED PRODUCTS
Air Track Plastic Foot for Lateral or Vertical Use
AUD 12.50(Ex GST)
Air Track Foot Adjusting Screw Lock Nut, Plastic
AUD 3.90(Ex GST)
Air Track Foot Adjusting Screw with Plastic Head
AUD 7.50(Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab