Dual Mode Regulated and Switched Power Supply
$799.50(Ex GST)
$799.50(Ex GST)
- Dual mode power supply for laboratory and education use
- Combines switched AC/DC output and smooth regulated DC output
- Switched section provides AC and DC at 2, 4, 6, 8, 10 and 12 V
- Switched output current listed as 8 A
- Regulated section provides 1.3 to 20 V DC
- Regulated output listed as 5 A, reducing to 2 A at lower voltages
- Smooth regulated DC output supports electronic studies
- Digital meter can monitor regulated output volts or amps
- Automatic overload protection for both operating modes
- Suitable for general laboratory work, electronics and low-voltage physics experiments
[request_quote_button]
- Description
- Datasheets & Manuals
Description
The Dual Mode Regulated and Switched Power Supply, also known as a combined switched AC/DC and regulated DC laboratory power supply, is designed for education laboratories requiring both general purpose low-voltage outputs and smooth regulated DC for electronics work. This IEC Dual Mode power supply combines two output sections in one unit. The switched section provides AC and DC outputs, while the regulated section provides smooth adjustable DC output for experiments where a more stable supply is required. The switched section provides AC and DC at 2, 4, 6, 8, 10 and 12 V, with output current listed as 8 A. This makes it suitable for general physics experiments, lamps, motors, electromagnets, resistance investigations and other compatible low-voltage classroom loads.
The regulated section provides smooth DC output from 1.3 to 20 V DC. The regulated output is listed as 5 A, reducing to 2 A at lower voltages, supporting a range of compatible electronic studies and low-voltage DC experiments. The regulated output is useful where a smooth and stable DC supply is necessary, such as electronic circuit demonstrations, component testing and experiments where unfiltered rectified DC may not be suitable. A digital meter is provided on the regulated section. The meter can be switched to monitor either output voltage or output current, supporting clearer setup and observation during laboratory use.
Automatic overload protection is included for both operating modes, helping protect the unit during overload conditions when used within approved classroom procedures. This power supply is suitable for school physics laboratories, electronics teaching spaces, university teaching laboratories and general science environments requiring a versatile combination of switched AC/DC and regulated DC output. Users should confirm the selected operating mode, voltage setting, current requirement, lead compatibility and load suitability before use. Connected circuits must remain within the rated capability of the selected output section.
This product is intended for laboratory or educational settings only. As a mains-powered electrical device, it should be used under appropriate teacher or laboratory supervisor control. This item is supplied as the Dual Mode regulated and switched power supply only. Leads, meters, lamps, motors, circuit boards, loads and additional accessories are not included unless specified separately.
LabChoice Australia supplies Dual Mode Power Supplies for school science laboratories, physics classrooms, electronics teaching laboratories and general education environments requiring practical switched and regulated low-voltage power supply equipment.
Datasheets & Manuals
Document :
Product Information Sheet(Pdf)
Polypropylene Aspirator Bottles, Autoclavable PP with Stopcock Tap
From $14.90 (Ex GST)
Concave Cavity Slides, Ground and Polished Microscope Slide Range
From $36.50 (Ex GST)
LO-ToX Glass Thermometers, 405 mm White Back Laboratory Range
From $47.50 (Ex GST)
Density Cube Sets, Multi Material Sets for Classroom Density Experiments
From $18.90 (Ex GST)
Calorimeter Heating Blocks, Educational Metal Block Set for Heat Studies
From $62.50 (Ex GST)
flask clamps CO₂ Orbital Shaker Accessory Pack
$703.90(Ex GST)
Save 10%
Portable Multi-Parameter Meters for pH, Conductivity and Dissolved Oxygen Testing
From $1,723.50 (Ex GST)
You May Also Need
BeeSpi V Photogate Holder, Adjustable Height and Angle
$93.50(Ex GST)
Centre Zero Student Meter for DC Current
From $43.90 (Ex GST)
Circuit Board Kit, Worcester Pattern Complete
$171.90(Ex GST)
Conductivity Electrodes, Stainless Steel Type
From $49.90 (Ex GST)
Digital Xenon Stroboscopes, XE and XEH Models
From $656.50 (Ex GST)
Electric Fields Apparatus and Junior Electricity Lab Kit
From $61.50 (Ex GST)
Electronics and Photonics Kit, Advanced Classroom Demonstration Kit
From $46.50 (Ex GST)
Electrostatics Experiment Kits, Static Electricity Experiment Set
From $72.50 (Ex GST)
Flat Plate Electrodes with Terminals, 75 × 25 × 3 mm
From $9.50 (Ex GST)
Iron Filings, Magnetic Field Pattern Demonstration Material
From $7.50 (Ex GST)
Laboratory Electroscope in Metal Housing
From $85.90 (Ex GST)
Norwood-Style Glass Electrodes, Set of 4, Kit Components
$125.90(Ex GST)
Superconductivity Kit, Complete Set
From $18.90 (Ex GST)
Tri-Mode Signal Generator, Power Supply and Amplifier
$1,023.90(Ex GST)
Water Turbine Hydro-Electric Power
$216.90(Ex GST)
[porto_related_products_slider]
Recently Viewed Products
Save 18% SELECT OPTIONSWas: $812.00 $662.00 (Ex GST)
IEC Simmerstat Magnetic Stirrer Hot Plate with PTFE Coated
SELECT OPTIONS
Digital Regulator Module, 1.2 to 20 V DC, 1 A
$210.90(Ex GST)
SELECT OPTIONS
Water Bath Temperature Controller for Hot Plate
$236.90(Ex GST)
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From $3.90 (Ex GST)
Polypropylene Filter Funnels, 50 mm to 150 mm Range
From $1.50 (Ex GST)
LATEST PRODUCTS
Pointed Scalpel with Plain Handle, 35 mm
$4.90(Ex GST)
Stainless Steel Scalpel Handles for Dissection
From $4.50 (Ex GST)
IEC Simmerstat Magnetic Stirrer Hot Plate with PTFE Coated
TOP RATED PRODUCTS
Pointed Scalpel with Plain Handle, 35 mm
$4.90(Ex GST)
Stainless Steel Scalpel Handles for Dissection
From $4.50 (Ex GST)
IEC Simmerstat Magnetic Stirrer Hot Plate with PTFE Coated
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab