Mass of Electron Power Supply with Digital Meter
$736.90(Ex GST)
$736.90(Ex GST)
- Special purpose power supply for Mass of Electron experiment
- Designed for use with LC-80-AP2120-001 experiment setup
- Powered by 220/240 V mains
- Fixed high voltage output listed as 250 V DC at about 1 mA
- Fixed heater output listed as 12 V AC at about 1 A
- Adjustable regulated current output from 0.1 to 2 A
- Regulated current output supports up to 25 V max
- High voltage output is used for the Magic Eye tube anode connection
- 12 V AC output is used for the tube heater
- Regulated current controls the magnetic field in the air-cored solenoid
- Large digital meter can monitor regulated current or output voltage
- Use only under appropriate teacher or laboratory supervisor control
[request_quote_button]
- Description
Description
The Mass of Electron Power Supply with Digital Meter, also known as a special purpose electron experiment power supply, is designed for use with the Mass of Electron experiment, LC-80-AP2120-001. This IEC power supply is powered by 220/240 V mains and provides the required outputs for the Magic Eye tube and air-cored solenoid used in the experiment.
The fixed high voltage output is listed as 250 V DC at about 1 mA. This output is used for the anode connection of the Magic Eye tube. The fixed heater output is listed as 12 V AC at about 1 A. This output is used to power the heater of the Magic Eye tube during the experiment. The unit also provides an adjustable and regulated current output from 0.1 to 2 A, up to 25 V maximum. This regulated current output is used to control the current, and therefore the magnetic field, in the air-cored solenoid, LC-80-EM0090-001.
A large digital meter is included for monitoring during setup and operation. A selector switch allows the meter to monitor either the regulated current or the output voltage, depending on the experiment requirement. This power supply is suitable for supervised physics teaching involving electron beam behaviour, magnetic deflection, charge-to-mass ratio principles and Mass of Electron demonstrations using compatible apparatus. Users should confirm compatibility with the Magic Eye tube, air-cored solenoid, experiment apparatus, lead connections and required operating method before use.
This product is intended for laboratory or educational settings only. As the unit is mains-powered and provides high voltage output, it must be used only under appropriate teacher or laboratory supervisor control with approved electrical safety procedures. This item is supplied as the Mass of Electron power supply only. Magic Eye tube, air-cored solenoid, experiment frame, leads, meters and additional accessories are not included unless specified separately.
LabChoice Australia supplies Mass of Electron Power Supplies for school science laboratories, physics classrooms, university teaching laboratories and education environments requiring specialised apparatus for electron and magnetic field demonstrations.
pH Test Strips, Labortary beverage type
From $34.90 (Ex GST)
Snap Ring Chromatography Vials, BORO 3.3
From $21.50 (Ex GST)
Buchner Funnels Sintered for Vacuum Filtration, BORO 3.3
From $15.90 (Ex GST)
Test Tubes Round Bottom, Rimless, Heat Resistant, BORO 3.3 Glass
From $31.00 (Ex GST)
Nylon Air Track End-of-Track Pulley Attachment
$20.90(Ex GST)
Hydrometers, Specific Gravity and Concentration Testing Range
From $43.90 (Ex GST)
You May Also Need
BeeSpi V Photogate Holder, Adjustable Height and Angle
$93.50(Ex GST)
Centre Zero Student Meter for DC Current
From $43.90 (Ex GST)
Centre Zero Student Volt Meter, Dual Range Galvanometer Type
$43.90(Ex GST)
Centre Zero Student Volt Meters, DC Polarity Teaching Type
From $43.90 (Ex GST)
Circuit Board Copper Foil Sheet, 150 × 150 mm
$17.50(Ex GST)
Conductivity Electrodes, Stainless Steel Type
From $49.90 (Ex GST)
Digital Xenon Stroboscopes, XE and XEH Models
From $656.50 (Ex GST)
Electric Fields Apparatus and Junior Electricity Lab Kit
From $61.50 (Ex GST)
Electrophorus metal with Handle and Plate
From $52.50 (Ex GST)
Iron Filings, Magnetic Field Pattern Demonstration Material
From $7.50 (Ex GST)
Key Press Contact Switch, Silver-Plated Contact Points
$28.90(Ex GST)
Tri-Mode Signal Generator, Power Supply and Amplifier
$1,023.90(Ex GST)
U-Core Electromagnet with Armature, 12 V DC
$97.50(Ex GST)
Wimshurst Machine Spare Belts, Replacement Belt Set
From $12.50 (Ex GST)
[porto_related_products_slider]
Recently Viewed Products
SELECT OPTIONS
Handheld Salinity Refractometer, 0 to 10%, ATC
$99.90(Ex GST)
Save 18% SELECT OPTIONSWas: $812.00 $662.00 (Ex GST)
IEC Simmerstat Magnetic Stirrer Hot Plate with PTFE Coated
SELECT OPTIONS
Digital Regulator Module, 1.2 to 20 V DC, 1 A
$210.90(Ex GST)
SELECT OPTIONS
Water Bath Temperature Controller for Hot Plate
$236.90(Ex GST)
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From $3.90 (Ex GST)
Polypropylene Filter Funnels, 50 mm to 150 mm Range
From $1.50 (Ex GST)
LATEST PRODUCTS
Pointed Scalpel with Plain Handle, 35 mm
$4.90(Ex GST)
Stainless Steel Scalpel Handles for Dissection
From $4.50 (Ex GST)
IEC Simmerstat Magnetic Stirrer Hot Plate with PTFE Coated
TOP RATED PRODUCTS
Pointed Scalpel with Plain Handle, 35 mm
$4.90(Ex GST)
Stainless Steel Scalpel Handles for Dissection
From $4.50 (Ex GST)
IEC Simmerstat Magnetic Stirrer Hot Plate with PTFE Coated
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab