Explore More: Laboratory Equipment
Polycarbonate Lid, SWB20 Bath Cover
- Polycarbonate lid suits SWB20 and SWB20D water bath series applications
- Suitable for bath temperatures up to 50°C during water bath operation use
- Fully transparent polycarbonate design allows easy observation inside bath
- Gabled lid design helps condensation run back into the water bath chamber
- Side wall height is 100 mm, with highest lid point listed at 170 mm overall
- Also known as transparent lid, see-through lid, water bath lid or gabled lid
- Description
Description
Polycarbonate lid for SWB20 series is used to reduce water loss due to evaporation and allow observation inside the waterbath without needing to keep lifting the lid.
Polycarbonate lid for SWB20 series is designed to suit SWB20 and SWB20D water baths. The lid is suitable for use with bath temperatures up to 50°C.
The gabled transparent polycarbonate design allows condensation to run down the lid and back into the bath. The fully transparent lid makes it possible to observe what is occurring within the waterbath.
It has a side wall height of 100 mm and the highest point in the lid is 170 mm. Also known as a transparent lid, see-through lid, water bath lid, water tank lid, or gabled lid.
Specifications
- Product type: Polycarbonate lid
- Suitability: SWB20 and SWB20D
- Temperature use: Bath temperatures up to 50°C
- Design: Gabled transparent lid
- Observation: Fully transparent for easy observation
- Side wall height: 100 mm
- Highest point in lid: 170 mm
- Also known as: Transparent lid, see-through lid, water bath lid, water tank lid, gabled lid
Similar Products
Magnetic Stirrer, Variable Speed Mixing Unit
From $410.00 (Ex GST)
Student Triple Range Voltmeter, Classroom Voltage Measurement Type
From $35.00 (Ex GST)
Polystyrene Test Tubes, General Purpose Laboratory Range
From $45.00 (Ex GST)
Motor Drive Unit with Pulley, Variable Speed Laboratory Unit
From $176.00 (Ex GST)
Rubber Stoppers
From $86.50 (Ex GST)
Air Track Stop Block, Laboratory Track Stop
From $2.20 (Ex GST)
Cow Distillation Adapter Borosilicate Glass
From $29.90 (Ex GST)
Block for Epp Tubes (Dry Block Heater)
From $255.00 (Ex GST)
Block for Falcon Tubes
From $255.00 (Ex GST)
Digital Dry Block Heater
From $1,382.00 (Ex GST)
Flame Spectrometer for Emission and Atomic Absorption
From $508.00 (Ex GST)
Flat Block for Vials
$254.00(Ex GST)
Immersion Cooler
$5,749.00(Ex GST)
Laboratory Water Bath with Hot Plate
From $190.00 (Ex GST)
Magnetic Stirrer, Variable Speed Mixing Unit
From $410.00 (Ex GST)
Mechanical Blood cell counter
From $12.00 (Ex GST)
Micro Tray Block
From $308.00 (Ex GST)
Personal Vortex Mixer
$542.00(Ex GST)
Plastic Coated Wire Bottle Carrier
$56.00(Ex GST)
Round Block with Holes For Tubes
From $227.00 (Ex GST)
Simple Heating Mantles, Controlled Heating for Round Bottom Flasks
From $255.00 (Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Polypropylene Filter Funnels, Gravity Filtration Range
From $1.00 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From $3.90 (Ex GST)
Boss Head Clamp for Lab Stands, Powder Coated, Heavy-Duty
From $6.50 (Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab