E
x
p
l
o
r
e
M
o
r
e
:
Parts & Accessories
Air Track Over-Track Photogate with Leg Supports
AUD 170.50(Ex GST)
AUD 170.50(Ex GST)
- General purpose photogate supplied with special air track mounting legs
- Designed to fit directly over compatible newer series air track tubes
- Spring extension legs slide into receptacles on each side of the gate
- Supports timing experiments in low-friction air track motion studies
- Useful for velocity, acceleration and collision timing demonstrations
- Cables and plugs are not supplied and must be selected separately
- Suitable for supervised physics laboratory and educational use
[request_quote_button]
- Description
Description
The Air Track Over-Track Photogate with Leg Supports, also known as an air track mounted photogate sensor, is designed for timing and motion measurement experiments using compatible air track systems. It is suitable for school physics laboratories, university teaching laboratories and supervised educational mechanics demonstrations.
This unit is supplied as a general purpose photogate with a pair of special spring extension legs. The legs are designed to slide tightly into receptacles on either side of the gate, allowing the photogate to fit directly to a compatible air track tube. The over-track mounting arrangement helps position the photogate securely across the air track path. This supports repeatable timing setups where gliders pass through the gate during low-friction motion experiments.
The photogate is useful for classroom experiments involving velocity, acceleration, collision timing and motion comparison. When used with a compatible timer and suitable cables, it helps students record timing events during structured air track practical work. Cables and plugs are not supplied with this item. Users should select the required cables, plugs and timer separately according to the intended timing system and laboratory setup. The supplied compatibility note states that this photogate fits only the newer series air track tube. Users should confirm air track model compatibility before purchase, especially when working with older air track systems.
LabChoice Australia supplies Air Track Photogates with Legs for school physics departments, university teaching laboratories and educational mechanics workspaces. They are suitable for supervised air track timing experiments, glider motion studies, collision investigations, velocity measurement and acceleration demonstrations using compatible newer series air tracks and timing equipment.
Petri Dish 90 mm, Polystyrene, Gamma Sterile - Pack of 500 Pcs
From AUD 151.50 (Ex GST)
Density Cubes, 2.5 cm Spare Cubes for Density and Buoyancy Experiments
From AUD 4.90 (Ex GST)
LDPE Dropping Bottle, Lab Dropwise Dispensing Bottle with Screw Cap
From AUD 2.90 (Ex GST)
Magnetic Stirrer, 5 Inch, up to 20 L Capacity
AUD 510.50(Ex GST)
Density Cubes, 1 cm Spare Cubes for Density and Buoyancy Experiments
From AUD 1.50 (Ex GST)
Warming Coil Septa Support Adapter, BORO 3.3 Glass - Each
AUD 9.90(Ex GST)
Receiver Delivery Adapter Long Stem BORO 3.3 Glass Laboratory Grade
From AUD 11.90 (Ex GST)
Millikan’s Apparatus, Electron Charge Demonstration Unit
From AUD 824.90 (Ex GST)
Pycnometer Density Bottles, Borosilicate Glass
From AUD 11.50 (Ex GST)
You May Also Need
Air Table Pucks & Pivot Pin, Lab Accessory Pack
From AUD 6.90 (Ex GST)
Air Track Attachment Screws, Accessory
From AUD 2.50 (Ex GST)
Air Track End Plug for Track Tube
AUD 5.50(Ex GST)
Air Track Glider Attachments, Inelastic Collision Accessory Set
From AUD 78.50 (Ex GST)
Air Track Gliders for Low Friction Motion
From AUD 32.90 (Ex GST)
Air Track Installation & User Manual
From AUD 6.90 (Ex GST)
Air Track Plastic Inclination Block Set (4 Pieces)
AUD 8.90(Ex GST)
Air Track Spark Track Parts, Educational Mechanics Spare Set
From AUD 13.50 (Ex GST)
Alligator Clips, 4 mm Banana Plug Shank, Pack of 10
From AUD 15.90 (Ex GST)
Boyle’s Law Glass Tubes, Laboratory Demonstration Tube Set
From AUD 21.90 (Ex GST)
Cast Iron Bar Breaker Rods, Pack of 10
AUD 15.90(Ex GST)
Deflagrating Spoon, 300 mm, Stainless Steel Cup with Cover
AUD 10.90(Ex GST)
Nylon Air Track End-of-Track Pulley Attachment
AUD 20.90(Ex GST)
Steel Balls, Precision Laboratory Grade
From AUD 50.90 (Ex GST)
Support Rack for Radiation Source and Absorber Alignment
AUD 46.90(Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Reagent Bottles, Wide Mouth, HDPE, Chemical-Resistant, Highly Reliable & Durable - Each
From AUD 1.50 (Ex GST)
Petri Dishes, Polypropylene, Autoclavable & Reusable, High Quality
From AUD 1.20 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From AUD 3.90 (Ex GST)
LATEST PRODUCTS
Brass Slotted Weights, Individual, 5 g to 100 g
From AUD 4.90 (Ex GST)
Density Cube Set, 1.0 cm Edge, Set of 6 in Plastic Box
AUD 18.90(Ex GST)
Density Cube Sets, 5 Cubes, 2.0 cm and 2.5 cm
From AUD 37.50 (Ex GST)
TOP RATED PRODUCTS
Brass Slotted Weights, Individual, 5 g to 100 g
From AUD 4.90 (Ex GST)
Density Cube Set, 1.0 cm Edge, Set of 6 in Plastic Box
AUD 18.90(Ex GST)
Density Cube Sets, 5 Cubes, 2.0 cm and 2.5 cm
From AUD 37.50 (Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab