DIY Climbing Solar Car Experiment Kit
AUD 47.50(Ex GST)
AUD 47.50(Ex GST)
- DIY solar car kit for science and STEM education
- Designed for experiments with solar energy
- Runs on solar power or batteries
- Switch between solar drive, battery drive and battery charge modes
- Useful for comparing performance on uphill and flat surfaces
- Supports investigations using added weight and surface changes
- Demonstrates energy conversion, motion and renewable energy concepts
- Practical hands-on activity for classroom learning
- Suitable for school, university and teaching laboratory use
- Confirm battery type and supplied components before use
- Use under appropriate laboratory or educational supervision
[request_quote_button]
- Description
Description
The DIY Climbing Solar Car Experiment Kit, also known as a solar powered model car kit, is designed for hands-on STEM, physics and renewable energy education. This kit allows students to experiment with solar energy by observing how light energy can be converted into electrical energy to drive a small model car. The car can run on solar power or batteries, allowing users to compare operating modes during approved classroom activities. The switch function allows selection between solar drive, battery drive and battery charge modes, supporting practical demonstrations of energy supply, storage and use.
Students can compare the car’s performance by adding weight, running it uphill or testing it on smooth straight surfaces, helping demonstrate how load, gradient and surface conditions affect motion. This kit is useful for lessons covering solar energy, electrical energy, mechanical motion, energy conversion, force, friction, load and renewable energy systems. Teachers can use the car alongside worksheets, timing activities, incline ramps, mass comparisons and approved experiment procedures to support structured student investigation. Users should confirm the required battery type, supplied components, charging method and assembly requirements before use. Do not short-circuit the battery holder or connect components outside the approved method.
Moving wheels, small components, batteries and solar panel connections should be handled carefully under supervision. This product is intended for laboratory or educational settings only and should be used under appropriate teacher or laboratory supervision. This item is supplied as the DIY Climbing Solar Car Experiment Kit only. Batteries, ramps, weights, timers, worksheets and additional accessories are not included unless specified separately.
LabChoice Australia supplies DIY Solar Car Experiment Kits for school science laboratories, physics classrooms, STEM education programs and university teaching environments requiring practical resources for solar energy and energy conversion demonstrations.
Circuit Board Kit, Worcester Pattern Complete
AUD 171.90(Ex GST)
General Laboratory Techniques Chart
AUD 48.90(Ex GST)
Tube Adapter for Digital Vortex Mixer, 25 holes, Ø4.5mm (0.1-0.5mL)
AUD 44.50(Ex GST)
Microplate Clamp for Microplate Mixer
AUD 44.50(Ex GST)
Top Cup for Digital Vortex Mixer
AUD 18.50(Ex GST)
U-Shaped Drying Tube with Side Arms and Shut-Off Valves, BORO 3.3 Glass
AUD 34.90(Ex GST)
Rubber Stoppers, One Hole Laboratory Sealing Range
From AUD 6.50 (Ex GST)
You May Also Need
Biological Eye Model, 6x Enlarged, 6 Parts on Stand
AUD 87.50(Ex GST)
Biological Female Reproductive System Model
AUD 207.90(Ex GST)
Biological Respiratory System Model on Board
AUD 236.90(Ex GST)
Biological Stomach Model, 2 Parts on Stand
AUD 99.90(Ex GST)
Biology Charts, Science Teaching Reference Posters
From AUD 93.50 (Ex GST)
Cloud demonstration Equipment
AUD 47.50(Ex GST)
Collision Apparatus for classroom mechanics
AUD 851.90(Ex GST)
Daniell Cell, 125 × 75 mm, with Support and Terminal
AUD 54.90(Ex GST)
Diffraction Grating Card, Classroom Spectrum Comparison Holder
AUD 68.50(Ex GST)
Educational rock specimens - Pack of 10 Pcs
From AUD 24.90 (Ex GST)
Educational rock specimens for geology
From AUD 24.90 (Ex GST)
Magnetic Map Orienteering Compasses, Large and Small
From AUD 8.90 (Ex GST)
Student Gyroscope Kit for Inertia and Precession
AUD 47.50(Ex GST)
Zoological Animal Cell Model on Stand
AUD 199.50(Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Reagent Bottles, Wide Mouth, HDPE, Chemical-Resistant, Highly Reliable & Durable - Each
From AUD 1.50 (Ex GST)
Petri Dishes, Polypropylene, Autoclavable & Reusable, High Quality
From AUD 1.20 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From AUD 3.90 (Ex GST)
LATEST PRODUCTS
Brass Slotted Weights, Individual, 5 g to 100 g
From AUD 4.90 (Ex GST)
Density Cube Set, 1.0 cm Edge, Set of 6 in Plastic Box
AUD 18.90(Ex GST)
Density Cube Sets, 5 Cubes, 2.0 cm and 2.5 cm
From AUD 37.50 (Ex GST)
TOP RATED PRODUCTS
Brass Slotted Weights, Individual, 5 g to 100 g
From AUD 4.90 (Ex GST)
Density Cube Set, 1.0 cm Edge, Set of 6 in Plastic Box
AUD 18.90(Ex GST)
Density Cube Sets, 5 Cubes, 2.0 cm and 2.5 cm
From AUD 37.50 (Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab