E
x
p
l
o
r
e
M
o
r
e
:
Parts & Accessories
Boyle’s Law High Pressure Coloured Fluid Bottle
AUD 21.90(Ex GST)
AUD 21.90(Ex GST)
- Coloured fluid for Boyle’s Law high pressure apparatus
- Supplied in bottle form as listed
- Enough fluid for one loading as listed
- Designed for compatible Boyle’s Law high pressure equipment
- Supports gas law pressure and volume demonstrations
- Useful for school, university and teaching laboratory use
- Practical refill or replacement fluid for existing apparatus
- Helps improve visibility during approved Boyle’s Law experiments
- Confirm apparatus compatibility before ordering
- Fluid only, Boyle’s Law apparatus is not included
- Wear suitable PPE and follow approved handling procedures
- Use under appropriate laboratory or educational supervision
[request_quote_button]
- Description
Description
The Boyle’s Law High Pressure Coloured Fluid Bottle, also known as Boyle’s Law apparatus refill fluid, is designed for compatible high pressure Boyle’s Law demonstration equipment. This coloured fluid is supplied in a bottle and is listed as enough for one loading of the compatible apparatus. It is used in approved Boyle’s Law experiments where students investigate the relationship between gas pressure and volume under controlled laboratory or educational conditions. The coloured fluid helps improve visibility within the apparatus, supporting clearer observation during classroom demonstrations and practical activities.
This product is suitable for school science laboratories, physics classrooms, university teaching laboratories and STEM programs using compatible Boyle’s Law high pressure apparatus. Users should confirm the apparatus model, required fluid volume, loading procedure, pressure rating and compatibility before ordering or use. The fluid should be handled carefully and used only according to the approved apparatus instructions. Do not overfill, mix with unknown fluids or use with incompatible equipment.
High pressure gas law apparatus should be operated only under supervision. Check seals, fittings and apparatus condition before loading or pressurising the system. This product is intended for laboratory or educational settings only and should be used under appropriate teacher or laboratory supervision. This item is supplied as the bottle of coloured fluid only. Boyle’s Law apparatus, pressure gauge, tubing, fittings, syringe, support stand, worksheets and additional accessories are not included unless specified separately.
LabChoice Australia supplies Boyle’s Law fluids and physics teaching accessories for school science laboratories, university teaching laboratories and educational facilities requiring practical consumables for gas law demonstrations.
Reagent Reservoirs, Polypropylene, Sloped, Disposable, Ideal for Pipetting & Lab Use
From AUD 5.50 (Ex GST)
Spare Wick, Alcohol Burner Replacement Wick for Spirit Lamps
From AUD 6.00 (Ex GST)
Retort Stand Kit, Laboratory Support Stand Set with Base, Rod and Clamps
AUD 45.50(Ex GST)
LCD Digital Magnetic Stirrer, 7 Inch, up to 20 L Capacity
AUD 898.50(Ex GST)
Magnetic Field Demonstrator, Oil Filled Flat Form
AUD 33.90(Ex GST)
Glass Low Form Beaker BORO 3.3 Size 3000 ML – 2 Pcs/Box
AUD 89.00(Ex GST)
Beaker Cleaning Brush, Nylon Bristles, 400 mm Length
AUD 4.90(Ex GST)
Electronic Burette with LCD Display and Stirrer up to 0.01-99.99 ml
AUD 1,510.00(Ex GST)
Digital Laboratory Water bath, 7 L to 50 L with Heating Temperature Control
From AUD 2,067.00 (Ex GST)
Test Tubes with Graduation and Stopper, BORO 3.3 Glass
From AUD 4.59 (Ex GST)
You May Also Need
Air Table Pucks, Complete with Weights
From AUD 38.50 (Ex GST)
Air Track Air Inlet End Cap, Triangular Plastic
AUD 14.50(Ex GST)
Air Track Attachment Screws, Accessory
From AUD 2.50 (Ex GST)
Air Track Foot Support for Spark and Paper Tracks
AUD 13.90(Ex GST)
Air Track Glider Soft Collision Attachment
AUD 81.90(Ex GST)
Air Track Over-Track Photogate with Leg Supports
AUD 170.50(Ex GST)
Air Track Spark Paper, Motion Recording Roll Black and White
From AUD 18.50 (Ex GST)
Air Track Stop Block Carrier, Felt Lined
AUD 37.90(Ex GST)
Alligator Clips, 4 mm Banana Plug Shank, Pack of 10
From AUD 15.90 (Ex GST)
Brass Filter Pump with Non-Return Valve
From AUD 77.50 (Ex GST)
Cast Iron Bar Breaker Rods, Pack of 10
AUD 15.90(Ex GST)
Deflagrating Spoon, 300 mm, Stainless Steel Cup with Cover
AUD 10.90(Ex GST)
Deflagrating Spoons with Aluminium Cap
From AUD 16.50 (Ex GST)
Hoffman Screw Tubing Clips, Adjustable Pinch Clamp for Flexible Tubing
From AUD 6.90 (Ex GST)
Pack of 4 Blue D-Cell Battery Holders for Series or Parallel Connections
AUD 13.90(Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From AUD 3.90 (Ex GST)
Reagent Bottles, Wide Mouth, HDPE, Chemical-Resistant, Highly Reliable & Durable - Each
From AUD 1.50 (Ex GST)
Petri Dishes, Polypropylene, Autoclavable & Reusable, High Quality
From AUD 1.20 (Ex GST)
LATEST PRODUCTS
Electronic Freezer / Fridge Thermometer with Alarm, -50°C to +70°C
AUD 52.50(Ex GST)
Boyle’s Law High Pressure Air Pump, Plastic
AUD 52.90(Ex GST)
Boyle’s Law High Pressure Pressure Pot Complete
AUD 55.90(Ex GST)
TOP RATED PRODUCTS
Electronic Freezer / Fridge Thermometer with Alarm, -50°C to +70°C
AUD 52.50(Ex GST)
Boyle’s Law High Pressure Air Pump, Plastic
AUD 52.90(Ex GST)
Boyle’s Law High Pressure Pressure Pot Complete
AUD 55.90(Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab