E
x
p
l
o
r
e
M
o
r
e
:
Parts & Accessories
Air Track Air Inlet Reducing Bush
AUD 15.50(Ex GST)
AUD 15.50(Ex GST)
- Reducing bush for compatible air track air inlet setups
- Fits into old style air track end moulding
- Reduces the inlet hole size for smaller air hose connection
- Suitable for the hose used on later model IEC adjustable speed air blower
- Helps adapt older air track equipment for newer blower hose use
- Practical spare or conversion part for air track maintenance
- Useful for school, university and teaching laboratory use
- Supports air supply setup for motion and dynamics experiments
- Confirm air track end moulding and hose compatibility before ordering
- Bush only, air track and air blower are not included
- Check for secure fit and air leakage before use
- Use under appropriate laboratory or educational supervision
[request_quote_button]
- Description
Description
The Air Track Air Inlet Reducing Bush, also known as an air track inlet adaptor bush, is designed for compatible IEC air track systems where an old style air track inlet needs to be used with a later model blower hose. This bush fits into the old style air track end moulding and reduces the hole size to suit the smaller hose used on the later model IEC adjustable speed air blower. It is a practical conversion accessory for laboratories maintaining older air track equipment while using newer air blower components.
The reducing bush helps support a suitable air supply connection during approved air track experiments involving motion, velocity, acceleration, dynamics and collision demonstrations. Users should confirm the old air track end moulding size, blower hose outside diameter, blower model, fit tolerance and airflow requirement before ordering or installation. The bush should be fitted securely before the blower is operated. Do not use if the bush is cracked, loose, blocked, deformed or incompatible with the selected air track setup.
Check the hose connection and inlet fit before use to help reduce air leakage and maintain suitable airflow for approved air track activities. This product is intended for laboratory or educational settings only and should be used under appropriate teacher or laboratory supervision. This item is supplied as the air track air inlet reducing bush only. Air track, IEC adjustable speed air blower, air hose, end cap, gliders, sub base, timers, photogates, cables and additional air track accessories are not included unless specified separately.
LabChoice Australia supplies Air Track Air Inlet Bushes, adaptors and spare parts for school science laboratories, physics classrooms, university teaching laboratories and STEM programs requiring practical components for air track motion experiments.
Air Track Air Tubes, 2 m and 2.5 m, with End Seals
From AUD 362.50 (Ex GST)
Screw Neck Chromatography Vials, BORO 3.3
From AUD 21.50 (Ex GST)
Newton’s Colour Disc, 23 cm, Disc Only
AUD 24.90(Ex GST)
Air Table Bronze Spring for Bumper Wires
AUD 4.50(Ex GST)
Adjustable Aepinus Air Capacitor, 200/283 mm Square Plates, 2–250 pF Range
AUD 323.50(Ex GST)
Liebig Condenser with Interchangeable Joint Socket, Borosilicate Glass (BORO 3.3)
From AUD 32.90 (Ex GST)
MCE Syringe Filters, Mixed Cellulose Ester Laboratory Filtration Range
From AUD 115.90 (Ex GST)
PETG Media Bottle with Cap, Non-Sterile
From AUD 419.50 (Ex GST)
Laboratory Stainless Steel Platform Jack, Height Adjustable
From AUD 299.90 (Ex GST)
You May Also Need
2 mm Banana Plug Cable, 300 mm, Moulded Stackable
From AUD 7.50 (Ex GST)
Air Table Pucks, Complete with Weights
From AUD 38.50 (Ex GST)
Air Track Attachment Screws, Accessory
From AUD 2.50 (Ex GST)
Air Track Foot Support for Spark and Paper Tracks
AUD 13.90(Ex GST)
Air Track Installation & User Manual
From AUD 6.90 (Ex GST)
Air Track Old Style Brass Glider Weights
From AUD 13.90 (Ex GST)
Air Track Plastic Inclination Block Set (4 Pieces)
AUD 8.90(Ex GST)
Air Track Replacement Velcro Strips, 20 × 75 mm, 2 Pairs
AUD 4.90(Ex GST)
Air Track Spark Track Paper Guides
From AUD 87.50 (Ex GST)
Air Track Stop Block Carrier, Felt Lined
AUD 37.90(Ex GST)
Alligator Clips, 4 mm Banana Plug Shank, Pack of 10
From AUD 15.90 (Ex GST)
Boyle’s Law Glass Tubes, Laboratory Demonstration Tube Set
From AUD 21.90 (Ex GST)
Hoffman Screw Tubing Clips, Adjustable Pinch Clamp for Flexible Tubing
From AUD 6.90 (Ex GST)
Replacement Hose Assembly for Air Source (Spare),2m
AUD 42.50(Ex GST)
Support Rack for Radiation Source and Absorber Alignment
AUD 46.90(Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From AUD 3.90 (Ex GST)
Reagent Bottles, Wide Mouth, HDPE, Chemical-Resistant, Highly Reliable & Durable - Each
From AUD 1.50 (Ex GST)
Petri Dishes, Polypropylene, Autoclavable & Reusable, High Quality
From AUD 1.20 (Ex GST)
LATEST PRODUCTS
Electronic Freezer / Fridge Thermometer with Alarm, -50°C to +70°C
AUD 52.50(Ex GST)
Boyle’s Law High Pressure Air Pump, Plastic
AUD 52.90(Ex GST)
Boyle’s Law High Pressure Pressure Pot Complete
AUD 55.90(Ex GST)
TOP RATED PRODUCTS
Electronic Freezer / Fridge Thermometer with Alarm, -50°C to +70°C
AUD 52.50(Ex GST)
Boyle’s Law High Pressure Air Pump, Plastic
AUD 52.90(Ex GST)
Boyle’s Law High Pressure Pressure Pot Complete
AUD 55.90(Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab