Intelligent 3D Shaker with Fixed Plate, 10° Tilt, 10-80 rpm
- Fixed plate with anti-slip silicone disc surface supports stable sample placement
- Gentle 3D motion with fixed 10° tilt angle supports uniform shaking and mixing
- Intelligent 3D shaker for flasks, culture flasks, Petri dishes and tubes
- Speed range supports 10-80 rpm for adjustable rotational mixing
- Maximum load capacity is listed as 2 kg with platform
- Independent LED displays show time and speed for clear operation monitoring
- Time setting range supports 1 minute to 99 hours 59 minutes
- Brushless DC motor supports stable routine operation
- Incubator compatible, subject to size, temperature, humidity and operating condition confirmation
- Suitable for cell culture workflows, DNA extraction, cell distribution and gel staining or destaining
- Work plate dimension is listed as 268 x 268 mm
- Unit dimensions are listed as 294 x 348 x 123 mm, with 3.7 kg weight
- Vessel type, load balance, incubator suitability, speed setting and operating conditions should be confirmed before use
[request_quote_button]
- Description
Description
Intelligent 3D Shaker with Fixed Plate, 10° Tilt, 10-80 rpm, also known as a laboratory 3D rocking shaker, is designed for gentle three-dimensional motion, uniform sample mixing and controlled low-speed shaking workflows. This 3D shaker provides motion at a fixed 10° tilt angle with an adjustable speed range of 10-80 rpm. The maximum load capacity is listed as 2 kg with platform, supporting compatible flasks, culture flasks, Petri dishes, tubes and sample containers used in routine laboratory applications.
This product is supplied with a fixed plate featuring an anti-slip silicone disc surface. The anti-slip surface helps improve sample placement stability during operation and supports better handling of compatible vessels during gentle 3D shaking workflows.
The independent LED display system shows time and speed, helping users monitor and control operation more easily. The time setting range supports 1 minute to 99 hours 59 minutes for controlled timed operation during suitable laboratory procedures. The brushless DC motor supports stable routine performance and reduced maintenance requirements. The shaker is listed as incubator compatible, but incubator size, temperature, humidity, ventilation, load and electrical suitability should be confirmed before use.
This Intelligent 3D Shaker is suitable for uniform shaking and mixing in flasks, culture flasks, Petri dishes and tubes. It can support workflows such as cell culture handling, DNA extraction, cell distribution, gel staining and gel destaining where gentle 3D motion is required. The supplied specifications list 20 W power, 100-240 V voltage, 50/60 Hz frequency, 294 x 348 x 123 mm dimensions, 268 x 268 mm work plate dimensions and 3.7 kg weight. The permissible ambient temperature is listed as 5-40°C, with permissible ambient humidity of 80% RH and IP21 protection class.
LabChoice Australia supplies Intelligent 3D Shakers for universities, research institutes, teaching laboratories, shared laboratory platforms, multi-research-group laboratories, hospital central and molecular laboratories, IVD R&D facilities, biotechnology companies, biopharmaceutical laboratories, third-party testing organisations and low-throughput sample preparation workspaces.
| Specification | Details |
|---|---|
| Motion type | 3D Motion |
| Tilt angle | 10° |
| Speed display | LED |
| Time settings range | 1min – 99h 59min |
| Max. load capacity (with platform) | 2 kg |
| Motor rating input | 16 W |
| Power | 20 W |
| Frequency | 50/60Hz |
| Work plate Dimension [W x D] | 268×268 mm |
| Permissible ambient temperature | 5-40℃ |
| Protection class | IP21 |
| Speed range | 10-80 rpm |
| Timer display | LED |
| Motor type | Brushless DC motor |
| Motor rating output | 10 W |
| Voltage | 100-240 V |
| Dimension [W×D×H] | 294×348×123 mm |
| Weight | 3.7 kg |
| Permissible ambient humidity | 80% RH |
Frequently Bought Together
Single Edge Razor Blades, Pack of 100
$27.50(Ex GST)
Scintillation Vial (Sample Vial), BORO 5.0
From $416.50 (Ex GST)
Borosilicate Side Arm Test Tubes, Laboratory Filtration Range
From $4.90 (Ex GST)
ASEP Powder-Coated Stream Tray
$266.50(Ex GST)
PP Caps for Snap Ring/Cap Vials
From $29.50 (Ex GST)
Hydrometers, Specific Gravity and Concentration Testing Range
From $43.90 (Ex GST)
Penny Head Ground Glass Stopper, High Quality Borosilicate Glass
From $2.00 (Ex GST)
You May Also Need
Block for Cuvettes
$392.00(Ex GST)
Block for Epp Tubes
From $255.00 (Ex GST)
Digital Dry Block Heater, Four Block, 200°C
$1,844.00(Ex GST)
Hybridisation Oven
$6,274.00(Ex GST)
Hybridisation Oven Carousel Suit
From $1,216.00 (Ex GST)
Medium Orbital Shaker Analogue
$2,062.00(Ex GST)
Medium Reciprocating Shaker
$3,640.00(Ex GST)
Medium Rotary Mixer
$3,333.00(Ex GST)
Micro Tray Block
From $308.00 (Ex GST)
Recirculating Cooler with Tank
$8,262.00(Ex GST)
Rotary Tube Mixer with Disc
$1,439.00(Ex GST)
Save 25%
Simmerstat Control with Combined Hot Plates & Magnetic Stirrer
From $626.00 (Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From $3.90 (Ex GST)
Polypropylene Filter Funnels, 50 mm to 150 mm Range
From $1.50 (Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab
