LED Digital Double Module Dry Bath with 2 Free Heating Blocks, up to 150°C
- Free includes 2 heating blocks supplied with the LED Digital Double Module Dry Bath
- Double module dry bath design supports compatible dual-block heating for routine laboratory sample workflows
- LED digital dry bath for controlled laboratory dry heating workflows up to 150°C
- Temperature control range supports room temperature +5°C to 150°C
- Temperature setting range is listed as 25°C to 150°C
- Temperature control accuracy is ±0.3°C at 25-90°C and ±0.6°C at 90-150°C
- Temperature display accuracy is listed as 0.1°C for clear monitoring
- Temperature uniformity at 37°C is specified as ±0.2°C
- Time setting range supports 0 minutes to 99 hours 59 minutes
- External temperature sensor is included for compatible temperature monitoring workflows
- LED display and knob adjustment support simple routine operation
- Overheating protection and sound reminder function support safer laboratory use
- Block lid helps with heat preservation and helps reduce contamination risk
- Heating block compatibility, tube format, sample vessel size and operating conditions should be confirmed before use
- Description
Description
The LED Digital Double Module Dry Bath, also known as a dual-block digital dry bath incubator, is designed for controlled dry heating of compatible laboratory samples, tubes and vessels in routine sample preparation and temperature-controlled workflows.
This double module dry bath supports a temperature control range from room temperature +5°C to 150°C, with a temperature setting range of 25°C to 150°C. The dual-block format supports practical heating of more samples or two compatible block positions during routine laboratory use.
The supplied specifications list temperature control accuracy of ±0.3°C from 25°C to 90°C and ±0.6°C from 90°C to 150°C. Temperature display accuracy is stated as 0.1°C in the supplied description, supporting clear monitoring during controlled heating processes.
Temperature uniformity is stated as ±0.2°C at 37°C, supporting consistent heating performance across compatible heating block applications. Users should confirm the heating block format, tube size and sample vessel compatibility before operation.
The time setting range is 0 minutes to 99 hours 59 minutes, allowing the unit to support both short heating steps and extended temperature-hold workflows. The LED display and knob adjustment provide straightforward operation for daily laboratory use.
The dry bath includes an external temperature sensor, overheating protection and a sound reminder function. These features support safer and more controlled operation during supervised laboratory heating workflows.
This product is supplied with 2 free heating blocks. The heating block design includes a lid to support heat preservation and help reduce exposure during operation. Final block format and vessel compatibility should be confirmed before use.
The supplied specifications list 200 W power, 110/220 V, 50/60 Hz voltage/frequency, 290 × 210 × 120 mm dimensions and 3.2 kg weight. Permissible ambient conditions are stated as 10°C to 40°C and <80% RH.
LabChoice Australia supplies LED Digital Double Module Dry Baths with 2 Free Heating Blocks for school laboratories, university teaching spaces, research laboratories, clinical teaching environments and routine sample preparation workspaces. They are suitable for supervised dry heating, timed incubation-style workflows and controlled temperature applications using compatible heating blocks and vessels.
| Specification | Details |
|---|---|
| Temperature Setting range | 25-150°C |
| Temperature display accuracy | 0min~99h59min |
| Power | 200 W |
| Voltage/Frequency | 110/220V,50/60HZ |
| Weight | 3.2 kg |
| Permissible ambient humidity | <80% RH |
| Temperature range | Room temp +5-150°C |
| Temperature control accuracy | @25-90°C: ±0.3°C | @90-150°C: ±0.6°C |
| Temperature uniformity@37℃ | ±0.2°C |
| External sensor | Yes |
| Display | LED |
| Dimension [WxDxH] | 290x210X120 mm |
| Permissible ambient temperature | 10-40°C |
Digital Dry Block Heater with Microprocessor Control, 200°C with LED Display
From $1,382.00 (Ex GST)
Vacuum Pump Filter Cartridge for Rocker Pump Protection
From $33.50 (Ex GST)
Motor Drive Unit with Pulley, Variable Speed Laboratory Unit
From $219.50 (Ex GST)
Hooke’s Law Tension Spring Sets, Variable Spring Constant Type
From $28.90 (Ex GST)
Classic Mechanical Equivalent of Heat (J) Apparatus
$530.90(Ex GST)
pH Sensor, Replacement Flat Sensor for Pocket pH Meters
$143.00(Ex GST)
Dissecting Scissors, Micro and Straight Stainless Steel AISI 420 Range
From $5.90 (Ex GST)
Aluminium Caps for Crimp Top Chromatography Vials
From $29.50 (Ex GST)
You May Also Need
5 Roller Tube Mixer
From $1,993.00 (Ex GST)
Block for Epp Tubes
From $255.00 (Ex GST)
Block for Falcon Tubes
From $255.00 (Ex GST)
Digital Dry Block Heater with Microprocessor Control, 200°C with LED Display
From $1,382.00 (Ex GST)
Digital Laboratory Water bath, 7 L to 50 L with Heating Temperature Control
From $2,067.00 (Ex GST)
Medium Orbital Shaker Analogue
$2,062.00(Ex GST)
Mini Magnetic Stirrer, 1L and 2L Capacity , Brushless Motor
From $99.90 (Ex GST)
Recirculating Cooler with Tank
$8,262.00(Ex GST)
Simmerstat Control with Combined Hot Plates & Magnetic Stirrer
From $835.90 (Ex GST)
Simmerstat Hot Plates
From $580.90 (Ex GST)
Standard Mini Rollers, 6 and 11 Roller Options
From $2,070.00 (Ex GST)
Vernier Calipers For Laboratory and Educational Work
From $9.90 (Ex GST)
Vortex Mixer, up to 3000 rpm
From $542.00 (Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Polypropylene Filter Funnels, 50 mm to 150 mm Range
From $1.50 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From $3.90 (Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab
