E
x
p
l
o
r
e
M
o
r
e
:
Laboratory Stands & Clamps
Test Tube Holder, Wooden Peg Type, 180 mm Long
AUD 3.50(Ex GST)
AUD 3.50(Ex GST)
- Wooden peg type test tube holder for routine laboratory use
- Holds compatible test tubes up to 20 mm diameter
- 180 mm length provides practical reach during tube handling
- Peg style design supports simple manual gripping of test tubes
- Wooden construction provides a lightweight reusable holder format
- Suitable for classroom demonstrations and preparation room use
- For supervised laboratory and educational use only
[request_quote_button]
- Description
Description
The Test Tube Holder, Wooden Peg Type, also known as a wooden test tube holder, is designed for holding compatible test tubes during routine laboratory handling, classroom demonstrations and preparation tasks. It is suitable for school science laboratories, university teaching laboratories, chemistry classrooms, preparation rooms and general laboratory workspaces. The holder is suitable for test tubes up to 20 mm diameter, based on the supplied specification. This supports use with compatible laboratory tubes where a simple hand-held gripping tool is required.
The stated length is 180 mm, providing practical reach during tube handling tasks. This helps users hold compatible test tubes more securely during routine bench work and supervised demonstrations. The peg type design provides a simple manual gripping action for compatible test tubes. Its straightforward format makes it suitable for repeated use in teaching laboratories and preparation areas. The wooden construction provides a lightweight reusable holder format for general laboratory use. Users should confirm tube fit, glassware condition and handling procedure before use. This holder should be used carefully, especially when working with fragile glassware, hot tubes or chemical contents. It is intended for supervised laboratory and educational use only, and users should follow appropriate classroom and laboratory safety procedures.
LabChoice Australia supplies Wooden Peg Type Test Tube Holders for school science departments, university laboratories, chemistry classrooms, preparation rooms and general laboratory environments. They are suitable for supervised test tube handling, classroom demonstrations, sample preparation and routine glassware support using compatible test tubes up to 20 mm diameter.
Buchner Filtration Flask with Side Arm, BORO 3.3
From AUD 16.90 (Ex GST)
Borosilicate Glass Crystallizing Dishes with Spout
From AUD 13.90 (Ex GST)
Caps for Schlenk Flasks BORO 3.3 Glass
AUD 32.95(Ex GST)
Tube Rotator for Sample Blood mixing, 0 to 80rpm
AUD 612.50(Ex GST)
Special Price
Cone Adapter Straight with PTFE Stopcock Borosilicate Glass Laboratory Grade
From AUD 24.90 (Ex GST)
Fluoride Ion Standard Solution, 1 ppm Calibration for Pocket Fluoride Meter
AUD 110.00(Ex GST)
OIML E2 Calibration Weight Sets, 1 mg to 10 kg & 1 g to 2 kg
From AUD 649.75 (Ex GST)
Salt Electrode, Replacement Sensor with 0.01 to 25% Salt Range
AUD 227.70(Ex GST)
Retort Ring, Mild Steel with Attached Bosshead, High Quality
From AUD 4.90 (Ex GST)
You May Also Need
Adjustable Thermometer Holder Clamp with Bosshead
AUD 14.90(Ex GST)
Burette Clamp, Fisher Type, Powder Coated Steel, Single/ Double
From AUD 6.90 (Ex GST)
Double Jaw Retort Clamp with 360° Swivel
AUD 28.90(Ex GST)
Laboratory Platform Jacks, Height Adjustable Apparatus Support Range
From AUD 118.50 (Ex GST)
Metal Test Tube Holder Nickel Plated, 16 to 30 mm, 150 mm Long
AUD 3.50(Ex GST)
Mohr Tubing Clip for Controlling Air and Gas Flow
AUD 8.90(Ex GST)
Retort Clamp, 3-Prong, Adjustable with Non-Slip Rubber Jaws for Secure Grip, High Quality
From AUD 12.00 (Ex GST)
Retort Ring, Mild Steel with Attached Bosshead, High Quality
From AUD 4.90 (Ex GST)
Retort Stand, Heavy Duty Mild Steel Base, 60cm Height, High Quality
From AUD 20.50 (Ex GST)
Rubber Mat for Air Lifting Atmospheric Pressure
AUD 92.50(Ex GST)
Square Cube Bosshead Clamp Holder
From AUD 14.90 (Ex GST)
Three Finger Clamp with Double Adjustable Swivel Bosshead
AUD 39.90(Ex GST)
Tripod Stand Round Cast Iron, Heat-Resistant and Durable - 125 x 200 mm
AUD 11.90(Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Petri Dishes, Polypropylene, Autoclavable & Reusable, High Quality
From AUD 1.20 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From AUD 3.90 (Ex GST)
Reagent Bottles, Wide Mouth, HDPE, Chemical-Resistant, Highly Reliable & Durable - Each
From AUD 1.50 (Ex GST)
LATEST PRODUCTS
Boss Head Clamp, 360° Rotatable Zinc for Retort Stands
AUD 26.90(Ex GST)
Cork Ring Support for Round-Bottom Flasks
From AUD 11.40 (Ex GST)
Carrier Tray, Polypropylene, for Laboratory Transport and Handling
AUD 59.90(Ex GST)
TOP RATED PRODUCTS
Boss Head Clamp, 360° Rotatable Zinc for Retort Stands
AUD 26.90(Ex GST)
Cork Ring Support for Round-Bottom Flasks
From AUD 11.40 (Ex GST)
Carrier Tray, Polypropylene, for Laboratory Transport and Handling
AUD 59.90(Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab