E
x
p
l
o
r
e
M
o
r
e
:
Parts & Accessories
Air Track Glider Weights, Collision Experiment Mass Set
From $11.90 (Ex GST)
From $11.90 (Ex GST)
- Brass glider weight range for compatible air track experiments
- Supports controlled mass changes for acceleration and collision studies
- Slotted weight set fits compatible air track glider weight blocks
- Slotted set includes 4 × 50 g, 4 × 20 g and 4 × 10 g weights
- Old style brass block weights clamp inside the glider spine
- Legacy block weight options include 50 g and 100 g sizes
- Users should confirm glider style before selecting weight format
[request_quote_button]
- Description
Description
The Air Track Glider Weights, also known as air track collision experiment mass sets, are designed for adjusting glider mass during low-friction dynamics experiments. They are suitable for school physics laboratories, university teaching laboratories and supervised educational mechanics demonstrations. This range supports controlled mass changes during air track experiments involving acceleration, momentum, collision behaviour and force relationships. By changing the glider mass, students can compare motion results under different loading conditions.
The slotted style brass weight set is designed to fit compatible glider weight blocks. The supplied set includes 4 × 50 g, 4 × 20 g and 4 × 10 g weights, allowing flexible mass combinations for repeated classroom experiments. Old style brass block weights are also available for legacy glider formats. These block weights clamp inside the glider spine and are listed in 100 g and 50 g options. An old style 200 mm glider compensating weight with screw is also listed. The supplied note states that this compensating weight is removable on older gliders but is now permanent in later model gliders.
These parts help laboratories maintain existing air track systems, replace missing components and configure gliders for specific collision or motion experiments. Users should confirm glider type, weight block compatibility and mounting method before selection.
LabChoice Australia supplies Air Track Glider Weights for school physics departments, university teaching laboratories and educational mechanics workspaces. They are suitable for supervised air track experiments involving collision studies, momentum comparison, acceleration measurement, mass variation and low-friction motion using compatible gliders and safe classroom procedures.
Battery Holders for AA and D Cells, 1 to 4 Cells, 4 mm Terminals Options
From $1.90 (Ex GST)
10-Level Conductivity Tester
$52.50(Ex GST)
Buchner Filtration Flask with Side Arm, BORO 3.3
From $16.90 (Ex GST)
Variable Speed LCD Digital Tube Roller, 6-Roller Type
Glass Low Form Beaker BORO 3.3 Size 100 ML – 6 Pcs/Box
$22.50(Ex GST)
Pipette Washer with Basket
$634.50(Ex GST)
Medium Rotary Mixer
$3,333.00(Ex GST)
You May Also Need
2 mm Banana Plug Cable, 300 mm, Moulded Stackable
From $7.50 (Ex GST)
Air Table, Dynamics and Kinematics Model
From $4.50 (Ex GST)
Air Track Non-Elastic Velcro Buffer Pair
$12.50(Ex GST)
Air Track Plastic Inclination Block Set (4 Pieces)
$8.90(Ex GST)
Air Track Replacement Velcro Strips, 20 × 75 mm, 2 Pairs
$4.90(Ex GST)
Air Track Spark Track Parts, Educational Mechanics Spare Set
From $13.50 (Ex GST)
Alligator Clips, 4 mm Banana Plug Shank, Pack of 10
From $15.90 (Ex GST)
Banana Plugs, 4mm
From $5.50 (Ex GST)
Banana Plugs, 4mm Laboratory Type
From $14.50 (Ex GST)
Boyle’s Law Apparatus Parts and Spares
From $13.50 (Ex GST)
Boyle’s Law Glass Tubes, Laboratory Demonstration Tube Set
From $21.90 (Ex GST)
Cast Iron Bar Breaker Rods, Pack of 10
$15.90(Ex GST)
Replacement Hose Assembly for Air Source (Spare),2m
$42.50(Ex GST)
Steel Balls, Precision Laboratory Grade
From $50.90 (Ex GST)
[porto_related_products_slider]
Recently Viewed Products
SELECT OPTIONS
Air Table Pucks & Pivot Pin, Lab Accessory Pack
From $6.90 (Ex GST)
SELECT OPTIONS
STEM Quiz Balls
From $32.50 (Ex GST)
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From $3.90 (Ex GST)
Polypropylene Filter Funnels, 50 mm to 150 mm Range
From $1.50 (Ex GST)
LATEST PRODUCTS
Pointed Scalpel with Plain Handle, 35 mm
$4.90(Ex GST)
Stainless Steel Scalpel Handles for Dissection
From $4.50 (Ex GST)
IEC Simmerstat Magnetic Stirrer Hot Plate with PTFE Coated
TOP RATED PRODUCTS
Pointed Scalpel with Plain Handle, 35 mm
$4.90(Ex GST)
Stainless Steel Scalpel Handles for Dissection
From $4.50 (Ex GST)
IEC Simmerstat Magnetic Stirrer Hot Plate with PTFE Coated
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab