E
x
p
l
o
r
e
M
o
r
e
:
Mechanics & Fluids
High Pressure Boyle’s Law Apparatus with Air Pump, Non-Mercury
AUD 387.90(Ex GST)
AUD 387.90(Ex GST)
- High-pressure Boyle’s Law apparatus for pressure and volume demonstrations
- Non-mercury design uses a coloured fluid in the pressure container
- Air pump raises pressure so pressure can be read on the gauge
- Heavy-walled glass tube shows reduced air volume as pressure increases
- Adjustable pointer can be clamped to indicate starting volume
- Complete kit includes air pump and coloured fluid as supplied
- Suitable for supervised laboratory and educational gas law experiments
[request_quote_button]
- Description
- Datasheets & Manuals
Description
The High Pressure Boyle’s Law Apparatus with Air Pump, also known as a non-mercury Boyle’s Law demonstration apparatus, is designed for studying the relationship between gas pressure and volume at higher pressures. It is suitable for school science laboratories, physics classrooms, chemistry classrooms, university teaching laboratories and supervised educational demonstrations. This apparatus performs a similar Boyle’s Law experiment to lower-pressure systems, but it is designed for use at higher pressures. The setup allows students to observe how the volume of trapped air changes as pressure is increased. Mercury is not used in this apparatus. A small high-pressure container contains a coloured fluid, supporting a safer classroom demonstration format compared with traditional mercury-based systems.
Pressure is increased using the supplied small air pump. As pressure rises in the container, the pressure is read from the gauge and the coloured fluid is pushed up the heavy-walled glass tube. As the fluid rises, the air volume in the glass tube is reduced. This visible change helps students connect the practical movement of the fluid column with the pressure-volume relationship described by Boyle’s Law. An adjustable pointer can be clamped at any point along the scale to indicate the starting volume. Students can then compare pressure and volume readings and perform calculations to demonstrate the inverse relationship between pressure and volume. The kit is supplied complete with air pump and coloured fluid. Users should handle the apparatus carefully, avoid over-pressurising the system and follow the supplied experiment instructions and school laboratory safety procedures.
LabChoice Australia supplies High Pressure Boyle’s Law Apparatus with Air Pump for school physics departments, chemistry classrooms, university teaching laboratories and educational gas law demonstrations. It is suitable for supervised experiments covering Boyle’s Law, pressure-volume relationships, gas compression and practical calculation of pressure and volume changes.
Datasheets & Manuals
Document :
Product Information Sheet(Pdf)
Reagent Reservoir for Multichannel Pipetting, Sterile
From AUD 59.50 (Ex GST)
Aneroid Barometers and Max Min Thermometer Hygrometer, Gilt Dial and Demonstration Model
From AUD 47.50 (Ex GST)
Recovery Bend Adapter with Sloping Elbow End, High Quality Borosilicate Glass (BORO 3.3)
From AUD 9.50 (Ex GST)
Adam Dune DCT Portable Compact Balances
From AUD 150.00 (Ex GST)
Superconductivity Kit, Complete Set
From AUD 18.90 (Ex GST)
Folding 3-Shelf Laboratory Trolley with Brakes
AUD 487.50(Ex GST)
Polypropylene Micro Tube Rack, 20 Place, 1.5 mL
AUD 12.29(Ex GST)
Pendulum Bobs, Brass, Steel and Plastic, Multiple Sizes
From AUD 3.50 (Ex GST)
Glass Coverslips, Square Plain Microscope Cover Glass Range
From AUD 1.90 (Ex GST)
You May Also Need
12 V DC Electric Kinetic Theory Model Apparatus
AUD 356.50(Ex GST)
Aluminium Pulleys, 50 mm Diameter, Single, Double and Triple
From AUD 9.90 (Ex GST)
ASEP Powder-Coated Stream Tray
AUD 266.50(Ex GST)
Cartesian Diver, 100 mm Glass Archimedes Principle Demonstrator
AUD 7.50(Ex GST)
Density Cube Sets, 2.0 cm and 2.5 cm, in Case
From AUD 67.50 (Ex GST)
Density Cubes, 2.5 cm, Individual General Purpose Cubes
From AUD 4.90 (Ex GST)
I-Gauge Mechanics Demonstrator, Height and Speed Measurement Teaching Set
AUD 610.50(Ex GST)
Micrometer, 0 to 25 mm Precision Thickness and Diameter Measurement Type
AUD 33.90(Ex GST)
Mini Projectile Launcher, Student Mechanics Experiment with Protractor
AUD 136.90(Ex GST)
Pendulum Bobs, Brass, Steel and Plastic, Multiple Sizes
From AUD 3.50 (Ex GST)
PSSC Helical Steel Spring Kit
AUD 87.50(Ex GST)
Scale Pans with Hook, Plastic, Brass and Aluminium, 75 mm
From AUD 24.90 (Ex GST)
Simple Wheel and Axle Pulley Set, Two Sizes Included 150 mm and 75 mm
AUD 89.90(Ex GST)
Steel Ball Set, 3 Sizes, 20 Balls per Size
AUD 42.50(Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From AUD 3.90 (Ex GST)
Reagent Bottles, Wide Mouth, HDPE, Chemical-Resistant, Highly Reliable & Durable - Each
From AUD 1.50 (Ex GST)
Petri Dishes, Polypropylene, Autoclavable & Reusable, High Quality
From AUD 1.20 (Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab