Hose Connection Adapter Bent BORO 3.3 Glass Laboratory Grade
- Connects and extends glassware joints for flexible lab setups
- Ideal for distillation, extraction, and reflux applications
- Provides airtight, precise connections between apparatus
- Heat and chemical resistant for demanding lab use
- Crafted from premium BORO 3.3 borosilicate glass
- High-quality product by LabChoice Australia
From $23.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Hot/Cold Thermopile on Heat Sink with Socket Terminals
- Peltier thermoelectric cell, demonstrates heating and cooling when DC is applied across multiple junctions.
- Flat plate construction, one face heats, opposite face cools, temperature difference clearly observable.
- Mounted on heat sink, supports stable demonstration and improves heat spreading on hot side.
- Two 4 mm sockets for easy DC connection with standard lab leads, polarity controls hot/cold side.
- Cold face can form ice under suitable conditions, strong visual for classroom thermoelectric lessons.
$99.00 (Ex GST)
IEC Hot Plate Water Bath and Thermostat Temperature Controller
- Water bath powered by IEC hot plate, ends slide for stable bench use and compact storage
- Fits two test tube stands for low cost biological work and convenient sample warming
- Optional thermostat controller clips to bath edge, controls hot plate to hold constant temperature
- Controller element slides to inner corner, stays submerged even with small water volumes
- Wet or dry operation, dry oven use recommended with probe against bath wall to avoid overheating
From $190.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Iodine Flask with Ground Glass Stopper, Borosilicate Glass (BORO 3.3)
- Ground glass stopper provides airtight closureÂ
- Ideal for iodine titration and volatile storageÂ
- Conical shape minimizes vapor loss effectivelyÂ
- Used in chemical analysis and iodine value testsÂ
- Common in research, education, and industry labsÂ
- Made from LabChoice BORO 3.3 glass – High qualityÂ
From $22.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Jacketed Coil Condenser BORO 3.3 Chemistry Grade
- Restricted Item – EUD Required: an End User Declaration (EUD) must be completed. A valid photo ID (such as a Passport, Driver Licence, or Proof of Age Card) is also required. Orders will not be shipped until all documentation is received and approved.
- High-efficiency vapour cooling with internal glass coil and full water jacket
- Extended condensation surface ideal for continuous reflux and high-boiling solvents
- Made from BORO 3.3 glass compliant with ISO 3585 and ASTM E438 Type I, Class A
- Excellent resistance to thermal shock, acids and organic solvents
- Smooth vapour flow and clean condensate return for reproducible results
- Interchangeable ground glass joints for easy integration with standard lab setups
From $137.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Jacketed Reaction Beaker Double Wall BORO 3.3 Glass
- Double walled jacket design for precise heating or cooling
- Removable hose connectors for easy cleaning and fast setup changes
- Made from BORO 3.3 glass compliant with ISO 3585 and ASTM E438
- Ideal for controlled reactions, buffer prep and temperature sensitive work
- Clear graduations and stable wide form for accurate measurements
- Compatible with circulating water baths and thermostatic systems
Jacketed Round Bottom Double Wall Flask For Distillation BORO 3.3
- Restricted Item – EUD Required: For flask sizes 500 mL or larger, an End User Declaration (EUD) must be completed. A valid photo ID (such as a Passport, Driver Licence, or Proof of Age Card) is also required. Orders will not be shipped until all documentation is received and approved.Â
- Double walled jacket design for controlled heating or cooling
- Round bottom shape supports uniform heat distribution during distillation
- Made from BORO 3.3 glass meeting ISO 3585 and ASTM E438 standards
- Ideal for fractional distillation, solvent recovery and essential oil processing
- Precision ground joint ensures secure, leak free system integration
- Reliable performance with circulating baths for accurate temperature control
Jointed Powder Funnel, BORO 3.3 Glass
- BORO 3.3 borosilicate glass powder funnel with ground joint for leak-reduced transfers
- Designed for clean, controlled pouring of powders and granules into jointed glassware
- Jointed connection helps minimise spillage and product loss during charging
- Chemically resistant, smooth glass surface for easier cleaning between samples
- Suitable for teaching labs, research labs, and general chemical handling workflows
From $5.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Kamifusen Paper Balloons, Pack of 10, Class Activity Ice-Breaker
• Kamifusen paper balloons, pack of 10 pieces, fun hands-on class activity for students and groups
• Inflate by bouncing hand to hand or person to person, demonstrates air trapping and pressure effects
• Great ice-breaker encourages inquiry with the question how this happens
• Lightweight paper construction intended for supervised educational use in laboratory or classroom settings
• Supports group participation and quick engagement, encourages discussion of motion, compression, rebound and airflow during class lessons
$34.00 (Ex GST)
Keck Clips for Glass Joints, Durable Plastic Clamps for Glass Ground Joints, High Quality
- Securely holds glass joints in placeÂ
- Made from heat-resistant, durable plasticÂ
- Compatible with standard taper ground jointsÂ
- Prevents joint separation during experimentsÂ
- Used in distillation, reflux, and lab setupsÂ
- Supplied by LabChoice Australia – Reliable fitÂ
From $2.20 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Key Press Contact Switch, Silver-Plated Contact Points
- Classic key-press switch for simple circuit make or break control in classroom electricity experiments and demonstrations.
- Momentary action, circuit completes only while pressed, supports timed pulses and controlled contact operation.
- IEC 4 mm socket spin-free head terminals provide secure wiring and quick reconnection during practical sessions.
- Silver-plated contact points help maintain reliable electrical contact under repeated student use and handling.
- Strong phosphor bronze spring blade supports durability and long service life in routine classroom conditions.
$23.00 (Ex GST)
Kimtech Disposable Wipes, Delicate Lab Task Wipes
- Kimtech disposable wipes designed for delicate laboratory cleaning and handling tasks
- Low lint performance helps support cleaner wiping of sensitive surfaces and instruments
- Soft, non abrasive texture suitable for glassware exteriors, lenses, and lab equipment surfaces
- Good absorbency for quick wipe-downs, small spills, and routine bench cleaning
- Single use format helps reduce cross contamination between samples and work areas
- Convenient for laboratories, research benches, QC areas, and classroom science settings
- Easy to dispense for fast, consistent use during repetitive lab tasks
- Practical consumable for hygienic housekeeping and controlled cleaning workflows
From $9.20 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Kipps Gas Generator Apparatus, Borosilicate Glass
- Kipp’s gas generator apparatus manufactured from borosilicate glass for laboratory use
- High chemical resistance and thermal stability suitable for common gas generating reactions
- Classic three chamber design for controlled, on demand gas production
- Transparent glass construction allows clear visual monitoring of reactions
- Smooth ground glass joints for secure assembly and reliable operation
- Ideal for educational laboratories, teaching demonstrations, and routine chemical experiments
- Supplied by LabChoice Australia, trusted specialists in laboratory glassware and equipment
From $149.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Kipps Gas Generator Apparatus, Polyethylene
- Polyethylene Kipp’s gas generator apparatus for safe, controlled laboratory gas generation
- Chemical resistant PE construction, suitable for common laboratory reagents
- Three chamber design enables on-demand gas production and automatic shut-off
- Lightweight, impact resistant, and non-breakable alternative to glass systems
- Easy to assemble, clean, and maintain for routine laboratory use
- Ideal for educational laboratories, teaching demonstrations, and basic research applications
- Supplied by LabChoice Australia, trusted laboratory equipment specialists
From $59.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Kjeldahl Digestion Flask Borosilicate Glass
- Designed specifically for Kjeldahl digestion in nitrogen and protein analysis workflows
- Flask shape supports controlled boiling and efficient mixing during acid digestion
- Suitable for use with concentrated sulphuric acid and digestion catalysts under high heat
- Compatible with standard Kjeldahl digestion and distillation systems used in laboratories
- Ideal for schools, universities, food testing, environmental analysis, and quality control labs
- Made from LabChoice BORO 3.3 glass – High quality
From $15.20 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Kjeldahl Digestion Flask Jointed BORO 3.3 Glass
- Jointed Kjeldahl digestion flask designed for secure connection to condensers and digestion assemblies
- Ideal for Kjeldahl nitrogen and protein analysis in analytical and teaching laboratories
- Jointed neck ensures leak resistant, stable setup during high temperature acid digestion
- Flask shape promotes controlled boiling and efficient mixing with sulphuric acid and catalysts
- Suitable for schools, universities, food testing, environmental and quality control laboratories
- Made from LabChoice BORO 3.3 glass – High quality
From $16.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Kundt’s Tube Apparatus with Microphone and Speaker, 50 mm Diameter, 800 mm Length
- Transparent Kundt’s resonance tube, 800 mm scale, adjustable piston, standing wave and resonance study.
- Two side holes with sliding shutters, supports controlled openings and repeatable experiment conditions.
- Mini-speaker fits tube end, generates sound waves, driver interfaces to amplifier or oscilloscope.
- Movable miniature microphone probes sound level along tube, helps find maxima and minima positions.
- Instruction booklet included, oscilloscope ideal for measurements, amplifier also usable for audible resonance.
$360.00 (Ex GST)
Laboratory Amplifiers
- High gain DC current amplifiers convert µA to mA for student meters, gain about 1000:1
- Franck Hertz DC amplifier uses internal 9V #216 cell, no on/off switch, input volts exceed 0.6 V
- Induction amplifier has extremely low input impedance, zero offset and adjustable gain up to 1000:1
- Audio amplifiers accept 3.5 mm 15 mV max or banana 150 mV max, speaker output or 4 mm scope sockets
- Audio power options include 9V, 12V AC/DC or 220/240V mains, plus a listed dual 10MHz and AC/DC audio 9V model
From $96.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Laboratory Beaker, Low Form, Graduated with Spout, Borosilicate Glass (BORO 3.3)
- Made from LabChoice BORO 3.3 glass – High qualityÂ
- Handles heat, acids, and solvents easilyÂ
- Spill-free pouring with low-form stabilityÂ
- Permanent graduations for lasting accuracy Boiling Flask, Flat Bottom, Borosilicate Glass (BORO 3.3)Â
- Trusted by research labs across AustraliaÂ
- LabChoice Australia – Quality glassware, fast deliveryÂ
From $2.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Laboratory Dry Bath Incubator
• Mini metal dry bath for microtubes, fits 0.2, 0.5, 1.5 and 2.0 mL centrifuge tubes with listed positions
• Temperature range indoor to 100°C, control accuracy ±0.1°C, uniformity ±0.3°C, heating time about 5 minutes
• Manual and automatic modes with time set 1–999 minutes or 1–999 seconds for incubation routines
• LCD shows set and real-time parameters, capacitive touch screen control, easy to observe and adjust
• Overheat protection switch, 100–220V 50–60Hz input, compact 157 x 115 x 100 mm, about 0.5 kg
$800.00 (Ex GST)
Laboratory Glass Beads 2.3–3mm, 500g Pack for Sterilisation & Heating
- Uniform 2.3–3 mm bead size for consistencyÂ
- Ideal for dry heat sterilisation of metal toolsÂ
- Can be used in bead sterilizers and heat bathsÂ
- Provides even thermal distribution and retentionÂ
- Common in microbiology, dental, and clinical labsÂ
- Supplied by LabChoice Australia – Laboratory trustedÂ
From $45.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Laboratory Light Sources
- Low power MES light sources for basic electricity teaching, 2.5 V lamp in screw socket format
- Connection options include two wire leads, 4 mm sockets, or 4 mm spin free IEC terminals depending on model
- Enclosed low power versions housed in a transparent plastic vial for protection during student handling
- High power option uses 12 V BA15d bayonet lamp, typically 15 to 21 W, base with 4 mm terminals
- Very high power 12 V 100 W quartz halogen in ventilated metal housing, shutters, stand mount rod and 1 m lead
From $10.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Laboratory Power Supplies and Modules, Multi Function Power Module
- HV and EHV: 0-500V DC 50mA or 3kV/0/3kV DC, 3mA limited, plus 2 x 6.3V AC outputs
- Switched supplies: 2-12V AC/DC at 5-6A, 8-10A, or 15A, with overload reset and indicator LEDs
- Regulated options: Digi-Pak adds smooth 16V DC metered output, Dual Mode adds regulated 1.3-20V DC
- Special units: constant current 30mA/30V, mass-of-electron supply 250V DC, 12V AC, plus regulated 0.1-2A
- Modules: smoothing up to 8A, regulator modules 1.2-20V or 1.3-12V, Selectavolt 1.5/3/6V DC
From $21.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Laboratory Teaching Switches
- Teaching switch modules with 4 mm banana socket connections, suited to classroom wiring and circuit experiments
- Rocker switch options include SPST and SPDT types on base, rated to switch up to 10A as specified
- Transparent housing on toggle and push button types shows switching action clearly for student understanding
- DPST toggle switches two circuits together using four terminals, supports simultaneous on off control of two lines
- Push button SPST normally open provides momentary contact style operation, supports timing and control experiments
From $25.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Large Demonstration Manometer, ±300 mm Range
- Large U-tube water manometer, ±300 mm range, mm water height demonstration
- 100 × 560 mm panel with wall-hanging ring, clear classroom visibility
- 12 mm clear PVC hose U-formed, durable, easy to fill and observe levels
- 400 mm scale between legs, quick reading of level difference and direction
- Top tube ends accessible for gentle blowing or low-pressure connections, gas pressure demos
$126.00 (Ex GST)
Laser View Prism and Bar Kits
- Specially moulded plastic prisms and bars make a laser beam visible through the material path
- Prism shapes match Hodson light box kit, bars include long straight and curved new mouldings
- Bars demonstrate internal reflection and optical fibre behaviour, supports photonics curriculum teaching
- Kit options: full set 8 parts, part set 6 shapes, or bars only set with two bars
- Designed for classroom optics demonstrations where beam tracing inside solids is required
From $83.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Lever and Fulcrum Set with Weights and Hangers Included 1 m long
- 1 m lever and fulcrum apparatus, metre rule balances at midpoint to demonstrate moments and equilibrium.
- Knife-edge pivot at centre with V-bearing support, consistent fulcrum seating for repeatable balance tests.
- Shows moment law, weight × distance equality on both sides, clear torque comparison along the rule.
- Includes two 50 g slotted weight carriers, hook over rule edge and slide to any marked position.
- Standard slotted masses not supplied, designed to use existing school weights with supplied carriers.
$170.00 (Ex GST)
Liebig Condenser with Interchangeable Joint Socket, Borosilicate Glass (BORO 3.3)
- Restricted Item – EUD Required: For condensers with B19 ground joints or larger, an End User Declaration (EUD) must be completed. A valid photo ID (such as a Passport, Driver Licence, or Proof of Age Card) is also required. Orders will not be shipped until all documentation is received and approved.
- Straight inner tube enables efficient condensationÂ
- Interchangeable socket fits standard joint glasswareÂ
- Designed for cooling vapours in distillation setupsÂ
- Common in organic chemistry, teaching, and researchÂ
- Reliable for reflux, purification, and extractionÂ
- Made from LabChoice BORO 3.3 glass – High qualityÂ
From $37.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Loudspeakers in Protective Housing, Enclosed Laboratory Speaker
- Loudspeakers in strong housings with metal grilles, protects cones during student handling and storage
- 4 mm socket connections on each unit, supports banana plug leads for fast classroom setup
- Extension speaker options: 75 mm or 56 mm diameter, both 8 ohm impedance, reasonable fidelity output
- Wave study option: pair of 150 mm twin cone speakers, 5 W RMS, 4 ohm impedance, broad range response
- Designed for IEC Wave Lab generator use, also general purpose, includes inbuilt current limiting to reduce coil burnout risk
From $63.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Magnetic Stirrer
- Electronic variable speed control approx 150 to 1500 RPM, strong magnet stirs up to glycerine viscosity
- 200 x 180 mm rectangular top plate, alloy, plain, epoxy coated, or PTFE coated options
- Corrosion resistance via epoxy coating or PTFE (Teflon) coating, PTFE also supports easier cleaning
- Stirrer hot plate combos add heat control plus speed control, front panel mains switch and controls
-  Thermostat models adjust 50 to 320°C and maintain set temperature, simmerstat recommended for boiling
From $410.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Manual Plastic Vacuum Pump Handheld with Built in Pressure Gauge
- Compact design for portable vacuum creationÂ
- Integrated pressure gauge for accurate readingsÂ
- Ergonomic handheld operation—no power requiredÂ
- Ideal for filtration, degassing, and lab testingÂ
- Durable plastic body resists chemical exposureÂ
- Supplied by LabChoice Australia – Reliable & efficientÂ
- Packaging: Single UnitÂ
$65.00 (Ex GST)
Measuring Cylinder Class A, Interchangeable Stopper, Round Base, Borosilicate Glass (BORO 3.3)
- Class A accuracy enables precise liquid measurementÂ
- Interchangeable stopper allows secure liquid sealingÂ
- Stable round base ensures safety during pouringÂ
- Ideal for titration, reagent prep, and quantitative workÂ
- Used in analytical, educational, and R&D laboratoriesÂ
- Made from LabChoice BORO 3.3 glass – High qualityÂ
From $28.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Measuring Cylinder Class A, Spout & Break-Resistant Collar, Borosilicate Glass (BORO 3.3)
- Class A tolerance enables precision volume analysisÂ
- Spout provides accurate, spill-free liquid dispensingÂ
- Break-resistant collar increases durability and safetyÂ
- Used for titration, dilution, and reagent measurementÂ
- Trusted in analytical, QC, pharma, and teaching labsÂ
- Made from LabChoice BORO 3.3 glass – High qualityÂ
From $11.20 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
didn't see what you are looking for ?
We’ll source it or make it for you. LabChoice supports your research every step.