Silicone Tubing, Laboratory Grade, High Quality
- Flexible silicone tubing for general liquid and gas transfer in laboratories, schools, and industry
- Smooth bore for consistent flow, easy rinsing, and reduced residue build-up
- Suitable for water, buffers, media, and many aqueous solutions, plus air and inert gas lines
- Stays pliable across a wide temperature range, helps resist kinking in tight bends
- Common choice for peristaltic pumps and circulation lines, select correct ID and wall thickness
- Typically autoclave compatible for routine sterilisation and reuse
- Available in multiple sizes to suit standard barbs, nozzles, and lab connections
- Check chemical compatibility for oils and organic solvents, LabChoice Australia can advise on selection
From $10.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Simple Clinometer (Inclinometer) for Angle Measurement
- Simple inclinometer clinometer for measuring incline or decline angle from observer to target object.
- Viewing tube and sight opening, centre target to set reference line for angle measurement.
- Button release activates swinging pendulum, graduated in degrees for direct readout.
- Allow brief stabilisation, then release button to clamp pendulum firmly for accurate reading.
- Fast angle measurement tool for fieldwork, slope demonstrations, and basic mechanics teaching tasks.
$55.00 (Ex GST)
Simple Copper–Constantan Thermocouple, 200 mm Length
- T-type thermocouple sensor, copper and constantan, welded junction tip for direct temperature sensing.
- 200 mm length, standard thermocouple cable format, easy integration into teaching and lab setups.
- High-temperature glass insulation supports use near heated surfaces and higher temperature environments.
- Heated junction generates small thermoelectric voltage, proportional relationship to temperature for measurement.
- Output suitable for temperature controllers, supports accurate temperature control in experiments and processes.
$8.00 (Ex GST)
Simple Planck Constant Practical Kit, 7 LED Set
- Low-cost Planck’s constant method
- 7 LED wavelength readings
- Includes 2 infrared LEDs
- Turn-on voltage measurement approach
- Graph plotting to determine h
$125.00 (Ex GST)
Simple Wheel and Axle Pulley Set, Two Sizes Included
- The IEC 'Tensile Testing Machine' is a simple but effective system of measuring the tensile strength of metals. Wire is used so that the forces involved are small and can easily be applied in the classroom.
- The machine uses an accurate dial indicator (resolution of 0.01mm) to measure stretch (extension) and uses a set of normal slotted weights to apply tensile forces to the various wires.
- The machine provides 3 different anchor points for the wires so that, effectively, the wires can be tested at 3 different lengths.
- The machine is supplied with rolls of .037mmD copper wire, 0.32mmD brass wire and 0.28mmD iron wire. NOTE:: The 9x50g and / or 9x100g slotted weight sets are not supplied with the machine.
$72.10 (Ex GST)
Siren Disc, Lab Sound Apparatus
- Rotating siren disc sound demonstrator, air jet through hole rows produces audible siren tone
- Aluminium disc listed 175 mm diameter with 10/6 mm stem, mounts on central shaft for rotation
- Four hole rows listed 24, 30, 36 and 48 holes, stated ratios 4, 5, 6 and 8
- Combined output of all hole rows stated to form a natural musical chord during operation
- Metal blow tube with fine jet directs air onto disc holes, creates siren sound for physics teaching
From $7.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Sloping Steam Distillation Heads BORO 3.3 Glass
- Restricted Item – An End User Declaration (EUD) must be completed. A valid photo ID (such as a Passport, Driver Licence, or Proof of Age Card) is also required. Orders will not be shipped until all documentation is received and approved.Â
- Designed for efficient steam distillation with improved condensate flow control
- Sloping head geometry helps reduce liquid hold-up and improves separation efficiency
- Suitable for essential oil extraction, organic chemistry distillation, and teaching laboratories
- Precision ground joints ensure secure, leak-resistant connections with standard lab glassware
- Durable, heat and chemical resistant construction for repeated high-temperature use
- Made from LabChoice BORO 3.3 glass – High quality, supplied by LabChoice Australia
Out of stock
Soxhlet Extraction Set with Coil Condenser BORO 3.3 Laboratory Glass
- Restricted Item – EUD Required: an End User Declaration (EUD) must be completed. A valid photo ID (such as a Passport, Driver Licence, or Proof of Age Card) is also required. Orders will not be shipped until all documentation is received and approved.
- Complete Soxhlet set for continuous solid liquid extraction
- High efficiency coil condenser for rapid and reliable vapour cooling
- Suitable for lipids, plant compounds, environmental and analytical extractions
- BORO 3.3 glass offers strong thermal stability and chemical resistance
- Clear visibility of solvent cycling for accurate method control
- Made from LabChoice BORO 3.3 glass, high quality
Soxhlet Stillhead for Extraction Apparatus, Borosilicate Glass (BORO 3.3), Heavy Quality
- Heavy quality design ensures long-lasting durabilityÂ
- Compatible with standard Soxhlet extraction setupsÂ
- Facilitates efficient solvent condensation and returnÂ
- Tight joint connections reduce vapor lossÂ
- Used in organic chemistry, food, and pharma labsÂ
- Made from LabChoice BORO 3.3 glass – High quality
From $68.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Spare Receiver for Dean and Stark Apparatus with Stopcock Cap, Borosilicate Glass (BORO 3.3), Heavy Quality
- Compatible with standard Dean-Stark assembliesÂ
- Integrated stopcock allows precise drainage controlÂ
- Heavy wall glass for durability under heatÂ
- Ideal for water content analysis via distillationÂ
- Used in chemical synthesis, petrochemicals, and R&DÂ
- Made from LabChoice BORO 3.3 glass – High quality
From $79.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Spare Wick, Alcohol Burner Replacement Wick for Spirit Lamps
- High-absorbency cotton ensures steady flameÂ
- Compatible with most spirit and alcohol burnersÂ
- Trim-to-fit design for various burner typesÂ
- Essential for routine replacement and safetyÂ
- Supports consistent burning in lab settingsÂ
- Packaging: Single UnitÂ
$0.60 (Ex GST)
Spatula Knife Wooden Handle, Stainless Steel Blade, High Quality
- Stainless steel blade resists corrosion and stainingÂ
- Wooden handle offers comfortable, firm gripÂ
- Ideal for scraping, mixing, and sample transferÂ
- Used in chemistry, biology, and material labsÂ
- Durable design supports repeated daily useÂ
- Supplied by LabChoice Australia – Trusted qualityÂ
From $7.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Spectrum Discharge Tube Set
- Spectrum discharge tube equipment for observing gas emission wavelengths from the thin tube section
- Six tube set supplied in foam case, gases listed as H, Hg, He, N, Ne, Ar, bright discharge performance
- Tube size specified 208 mm overall length and 12 mm diameter at large ends for consistent fit
- EHV power unit runs from 240V AC, includes stainless rod and sliding clamp tube support, recessed HV socket
- Safety critical high voltage use, power off before changing tubes, do not insert finger into socket, hydrogen needs highest voltage supported
From $209.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Spirit Lamp, Alcohol Burner, Stainless Steel, Aluminium & Glass Options
- Multiple material options to suit any labÂ
- Produces stable, adjustable flame for heatingÂ
- Ideal for sterilization, flame tests, and small reactionsÂ
- Compact, portable, and easy to refillÂ
- Used in teaching, research, and fieldworkÂ
- Supplied by LabChoice Australia – Safe & versatileÂ
From $7.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Spring Balance Newton Meters, Cylindrical, Colour Coded, 1N to 100N Ranges
From $11.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Spring Balance Newton Meters, Plastic Aluminium, 1N to 50N, Colour Ranges
• Plastic aluminium spring balances, also known as Newton meters, for direct force measurement in experiments
• Ranges cover 1 N to 50 N, with gram equivalents from 100 g to 5000 g as provided
Division steps vary by model, from 2 g to 50 g, supports matching sensitivity to expected loads
• Used in physics and education for force and motion activities, described for basic accelerometer use
• Also used in industry and education to measure pulling force, load changes, and spring extension response
From $7.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Square Bottle, Wide Mouth, Polypropylene, Autoclavable and Screw Cap 4 Litre
- Wide mouth enables easy filling and pouringÂ
- Polypropylene body is durable and autoclavableÂ
- Secure screw cap ensures leak-resistant sealingÂ
- Square shape maximizes storage and stabilityÂ
- Ideal for bulk reagent storage and transportÂ
- Supplied by LabChoice Australia – Reliable qualityÂ
$44.20 (Ex GST)
Square Cube Bosshead Clamp Holder
• Square cube bosshead clamp holder for fixing perpendicular rod structures, supports cross bracing and stand assemblies
• Material stated zinc alloy with chromed finish, described as square cube cross clip style for lab stand rods
• Rod size options listed 10 mm rods and 12 + 12 mm square cube type, select to match rod diameters used
• Used to hold rods at right angles, supports building frames for clamps, sensors, and apparatus positioning in practical work
• For laboratory or educational settings only under supervision, ensure rods are fully seated and tighten evenly to prevent slipping during experiments
From $12.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Steam Distillation Kit For Oil Essential, BORO 3.3
- Steam distillation kit for extracting essential oils from botanical material using steam separation
- BORO 3.3 borosilicate glass for strong thermal performance and chemical resistance in routine lab use
- Supports clean collection of volatile oil fraction and hydrosol during distillation runs
- Suitable for teaching demonstrations, R&D trials, and small-scale essential oil workflows
- Designed for repeatable setup, easy cleaning, and reliable results across distillation cycles
Steam-Heated Linear Expansion Apparatus with Dial Gauge Indicator
- Steam heating method for linear expansion comparison of metal tubes in thermal physics practicals.
- Dial indicator measurement, 0.01 mm increments, supports precise extension readings and repeatability.
- Thermometer included for cold and hot tube temperature tracking during expansion measurements.
- Steam supply via boiling flask side branch, compatible with standard lab steam generation setups.
- Links measured extension to temperature change for linear expansion calculations and classroom data analysis.
$264.00 (Ex GST)
Steel Ball Set, 3 Sizes, 20 Balls per Size
- Steel ball set with three diameters, 12.7 mm, 16 mm, 19 mm, consistent sizes for class practicals.
- Quantity 20 per size, supports group work and repeated trials with matched balls and setups.
- Suitable for rolling experiments, investigating motion on tracks, ramps, and flat surfaces.
- Useful for collision demonstrations, impact comparisons, and momentum style classroom activities.
- Supports falling and drop tests, basic mechanics observations using durable uniform steel spheres.
$34.00 (Ex GST)
Steel Balls, Precision Laboratory Grade
- Steel balls supplied as single size sets of 60, diameter options 12.7 mm, 16 mm, 19 mm
- Supports collision investigations, elastic and inelastic interactions, rebound behaviour, and momentum transfer comparisons
- Useful for Newton’s laws demonstrations, acceleration response, force direction changes, and motion analysis activities
- Three sizes allow controlled comparisons of outcomes when diameter changes, while keeping ball count constant
- Suitable for repeat classroom runs, set quantities support group work, sorting, storage, and consistent experiment preparation
From $40.70 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
STEM Quiz Balls
• Interactive Clever Catch quiz ball format for class participation lessons, supports active learning and recall
• Catch the ball and answer the question under the left thumb, encourages quick response and group discussion
• Topics available: renewable energy, chemistry, green earth, human anatomy, minerals, physics, rocks, weather
• Teacher guide and answers included, supports structured delivery and consistent marking in Years 7 to 9
• Designed for educational settings, improves engagement and reduces passive learning, use under supervision only
From $26.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Still Head Thermometer Adapter BORO 3.3 Distillation Glass
- Made from premium BORO 3.3 borosilicate glass compliant with ISO 3585 and ASTM E438 Type 1, Class A
- Designed for accurate thermometer placement in distillation and reflux systems
- Precision-ground joints meet ISO 383 and ASTM E676 for universal glassware compatibility
- Excellent chemical and thermal resistance for demanding laboratory use
- Clear glass body allows full visibility of vapour flow and condensation
- Quality-tested and certified by LabChoice Australia – High durability and precision
From $34.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Stirring Rods, Rounded Ends, Laboratory Grade, Borosilicate Glass (BORO 3.3)
- Smooth rounded ends prevent scratching glasswareÂ
- Suitable for mixing, stirring, or decanting liquidsÂ
- Laboratory-grade construction for daily lab useÂ
- Resistant to heat, acids, and solventsÂ
- Used in teaching, industrial, and research settingsÂ
- Made from LabChoice BORO 3.3 glass – High qualityÂ
From $0.95 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Stoppers, Polypropylene, Reusable, Lab Grade Quality, High Quality
- Durable polypropylene for chemical compatibilityÂ
- Reusable design supports repeated lab useÂ
- Precision-molded for standard joint sizesÂ
- Lab-grade quality for research and teachingÂ
- Resistant to acids, bases, and solventsÂ
- Secure fit ensures reliable sealing in experimentsÂ
From $2.20 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Straight Splash Heads Adapter for Distillation Assemblies, BORO 3.3 Glass
- Restricted Item – EUD Required: an End User Declaration (EUD) must be completed. A valid photo ID (such as a Passport, Driver Licence, or Proof of Age Card) is also required. Orders will not be shipped until all documentation is received and approved.Â
- Straight splash head adapter designed for efficient vapour control in distillation assemblies
- Helps prevent liquid carryover while maintaining smooth vapour flow
- Suitable for simple distillation and reflux laboratory setups
- Compatible with standard laboratory flasks and condensers
- Manufactured for thermal and chemical resistance in routine lab use
- Made from LabChoice BORO 3.3 glass – High quality, supplied by LabChoice Australia
Straight Vacuum Adapter BORO 3.3 Glass Laboratory Grade
- Enables secure vacuum connections in distillation and filtration setups
- Straight design ensures smooth gas or vapor flow with minimal resistance
- Ideal for laboratory condensers, flasks, and vacuum systems
- Heat and chemical resistant for consistent, long-term use
- Manufactured from high-quality BORO 3.3 borosilicate glass
- Precision-engineered and quality-tested by LabChoice Australia
From $28.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Stroboscopes
- Stroboscopes for non contact motion measurement and apparent freezing of moving objects in teaching and industry
- LED student strobe runs on 12V, silent flash, microprocessor stability, adjustable 1–500 Hz, Hz or RPM display
- Xenon strobe models provide very bright output with 150 mm reflector, adjustable 1–300 Hz, mains sync and external trigger
- Hand disc strobe demonstrates shuttering with adjustable slot counts 1 to 12, compact ABS design for classroom handling
- Motorised disc strobe maintains speed with built in control, supplied discs 4 8 12 slots plus blank disc, runs up to 12V AC/DC
From $83.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Student Plastic Geoboard with Rubber Bands Included
- Plastic geoboard with pins, uses coloured elastic bands to build and compare geometric shapes by stretching between points.
- Rectangular pin grid side supports angular shapes, squares, rectangles, triangles, parallelograms, polygons, trapeziums.
- Circular pin pattern side supports circle geometry, chords, segments, sectors, quadrants, and related definitions.
- Hands-on tool for exploring area relationships, shape properties, and geometry vocabulary through construction.
- Suitable for student practice, quick shape creation, visual comparison, and repeated classroom activities.
$15.00 (Ex GST)
Support Rack for Radiation Source and Absorber Alignment
- Small plastic rack holds radioactive source and absorber together for aligned radiation study setups.
- Maintains consistent geometry, improves repeatability when comparing attenuation between absorber pieces.
- Designed to position selected absorber directly in line with source for controlled practical demonstrations.
- Simple support accessory used with absorber sets, reduces handling errors during student experiments.
- Normally supplied as part of the absorber set kit, suitable replacement or spare component.
$37.40 (Ex GST)
Tensile Testing Machine for Strength of Materials Experiments
- Classroom tensile test machine for metal wire strength studies, low-force loading using standard slotted weights.
- Dial indicator measures extension with 0.01 mm resolution, supports clear stretch readings during loading steps.
- Three anchor points, enables testing at three effective wire lengths for comparative extension measurements.
- Supplied wire rolls, copper 0.37 mm, brass 0.32 mm, iron 0.28 mm diameters for student experiments.
- Slotted weight sets not included, requires standard 9 × 50 g and or 9 × 100 g sets for loading.
$319.00 (Ex GST)
Test Tube Rack and Drain, Non-Float Polypropylene, Autoclavable
- Support and drain rack, holds tubes upright during use and speeds drying after washing between runs
- High density, filled polypropylene body designed not to float in water baths or sinks when immersed
- Suitable for general lab work, high temperature washing, and autoclaving applications, routine cleaning cycles
- Capacity options: 8 positions for 10 mm tubes plus 8 positions for 16 mm tubes
- Alternative rack: 8 positions for 25 mm diameter tubes, same non-float autoclavable construction for larger tubes
From $20.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
didn't see what you are looking for ?
We’ll source it or make it for you. LabChoice supports your research every step.