pH Meter Kit PH700-PW Benchtop for Pure Water and Low Ionic Strength Solutions, 0 to 14.00 pH

Description

pH Meter Kit PH700-PW Benchtop for Pure Water and Low Ionic Strength Solutions, 0 to 14.00 pH, also known as a benchtop pure water pH meter kit, is designed for laboratory pH measurement in pure water and low ionic strength water samples.

This kit is suitable for distilled water, deionised water, well water, stormwater, drinking water, reverse osmosis water and other compatible low ionic strength solutions. These sample types can be more difficult to measure with a standard pH electrode, so the electrode selection is important for stable routine testing.

The included LabSen® 803 pH / temperature electrode is engineered for pure water and low ionic strength water solutions. Its specialised low-impedance L membrane supports more suitable pH response in samples where ionic content is low.

The meter supports 1–3 point automatic calibration with self-diagnosis and electrode condition display. These functions help users check calibration quality and electrode condition before routine measurement.

Max / Min reading mode allows users to review the highest and lowest reading during a testing period, while the 50-set data storage supports simple measurement recall directly on the meter. The IP54 spill-proof and dust-proof design supports routine benchtop laboratory use.

Included with this pH Meter Kit: PH700 Benchtop pH Meter, LabSen® 803 pH / Temperature Electrode, pH 4.00 Buffer Solution, pH 7.00 Buffer Solution, pH 10.01 Buffer Solution, 9V Power Adapter, Electrode Holder and User Manual.

Users should follow the correct calibration, rinsing, soaking and storage procedure to support reading stability and electrode service life. Pure water and low ionic strength samples should be measured using the correct electrode, calibration routine and sample handling method.

LabChoice Australia supplies pH Meter Kits for schools, universities, laboratories, water-quality users and QC teams requiring benchtop pH measurement for pure water and low ionic strength solution workflows.

Features

• PH700-PW benchtop pH meter kit
• Designed for pure water and low ionic strength solutions
• Suitable for solutions below 100 µS conductivity
• pH range: 0 to 14.00 pH
• LabSen® 803 pH / temperature electrode included
• Swiss LabSen 803 electrode design
• Specialised low-impedance L membrane
• Measures pH and temperature on compatible meter setup
• 1–3 point automatic calibration
• Self-diagnosis function
• Electrode condition display
• Max / Min reading mode
• Stores up to 50 data sets
• IP54 spill-proof and dust-proof design
• Simple electrode holder included
• Electrode holder supports up to 2 electrodes
• Premixed pH calibration buffer solutions included
• pH 4.00 buffer solution included, 50 mL
• pH 7.00 buffer solution included, 50 mL
• pH 10.01 buffer solution included, 50 mL
• 9V power adapter included
• User manual included
• Calibration routine, electrode care, storage solution, sample compatibility and low ionic strength testing method should be confirmed before use

Warranty

The instrument is covered for defects in material and workmanship for two years, while the probe is covered for six months from delivery, subject to the manufacturer’s warranty terms.

The limited warranty does not cover issues caused by accidental damage, improper use, normal wear and tear, transport, storage, failure to follow product instructions, unauthorised maintenance, unauthorised modification, unauthorised repair, incompatible use with other products or materials, abuse, accidents or external causes beyond reasonable control.

Instrument Only