E
x
p
l
o
r
e
M
o
r
e
:
Electrochemistry Meters & Analysers
pH/EC Combo Probe Replacement PC60-E for PC60 Pocket Multiparameter Tester
AUD 145.00(Ex GST)
AUD 145.00(Ex GST)
- Replacement combo probe designed for the PC60 Pocket Multiparameter Tester
- Supports routine water testing across pH, conductivity, TDS, salinity and temperature parameters
- Suitable for general water-solution testing in hydroponics, aquaculture, pools, spas and water treatment workflows
- Practical choice for users needing one replacement probe for multiparameter testing instead of separate pH and EC sensors
- Helps extend the usable life of the PC60 tester body when the original probe reaches end of service life
- Dual-sensor design supports compact multiparameter measurement in portable field and bench testing environments
[request_quote_button]
- Description
Description
pH/EC Combo Probe Replacement PC60-E for PC60 Pocket Multiparameter Tester, also known as a replacement multiparameter probe, is designed to replace the original probe on compatible PC60 pocket tester units.
This replacement probe is suitable for regular water-solution testing where users need pH, conductivity, TDS, salinity and temperature measurement through one compatible handheld tester. The PC60-E uses a dual-sensor design, combining a high-sensitivity glass pH membrane with a brush-resistant platinum black conductivity sensor. This allows the compatible PC60 tester to support both pH and conductivity-based water-quality measurements.
The BPB conductivity sensor is designed to support accurate conductivity measurement across a wide range for general water solutions. Conductivity-based readings can also support TDS and salinity measurement when used with the correct meter settings. Replacing the probe helps extend the usable life of the PC60 tester body when the original probe has aged, become damaged or no longer provides stable readings.
Users should follow the correct installation, calibration, rinsing, cleaning and storage procedure after fitting the replacement probe. pH membrane care and conductivity cell cleaning are both important for stable multiparameter readings.
LabChoice Australia supplies replacement multiparameter probes and tester accessories for schools, universities, hydroponic users, aquaculture teams, pool and spa users, water-treatment teams and routine water-quality testing workflows.
Features
- PC60-E replacement probe
- Compatible with PC60 Pocket Multiparameter Tester
- Measures pH on compatible PC60 tester units
- Measures conductivity on compatible PC60 tester units
- Supports TDS testing on compatible PC60 tester units
- Supports salinity testing on compatible PC60 tester units
- Supports temperature measurement on compatible PC60 tester units
- Dual sensor design
- High-sensitivity glass pH membrane
- Brush-resistant platinum black conductivity sensor
- BPB sensor technology
- Designed for regular water-solution testing
- Suitable for wide-range conductivity measurement
- Suitable for general pH measurement in water solutions
- Probe installation, calibration routine, pH membrane care, conductivity cell cleaning and sample suitability should be confirmed before use
Warranty
This electrode is covered for defects in material and workmanship for six months from delivery, subject to the manufacturer’s warranty terms.
The limited warranty does not cover issues caused by accidental damage, improper use, normal wear and tear, transport, storage, failure to follow product instructions, unauthorised maintenance, unauthorised modification, unauthorised repair, incompatible use with other products or materials, abuse, accidents or external causes beyond reasonable control.
Biological Head Model on Base with Neck and Brain
AUD 186.90(Ex GST)
Gooch Sintered Crucibles, BORO 3.3 Glass
From AUD 20.90 (Ex GST)
pH Electrode Replacement Soil Spear for GroStar® GS2-E
AUD 345.00(Ex GST)
Displacement and Spouting Vessels, Liquid Behaviour Demonstration Range
From AUD 10.90 (Ex GST)
Mineral Specimens for Educational Geology
From AUD 29.90 (Ex GST)
Straight Splash Heads Adapter for Distillation Assemblies, BORO 3.3 Glass
From AUD 40.50 (Ex GST)
Glass Cuvette with Lid for Visible Spectrophotometry - Pack of 2 Pcs
AUD 44.90(Ex GST)
Electrostatic Pith Balls, Laboratory Charge Study Model
From AUD 12.50 (Ex GST)
Steel Balls, Precision Laboratory Grade
From AUD 50.90 (Ex GST)
Electron Charge-to-Mass Apparatus with Tube, Solenoid Not Included
AUD 232.90(Ex GST)
You May Also Need
Save 10%
Benchtop Classical Series Multi-Parameter Meter for pH, Conductivity and DO Testing
From AUD 2,467.50 (Ex GST)
Calcium Ion Sensor, Replacement Sensor with 4 to 9900 ppm Range
AUD 227.70(Ex GST)
Digital pH Pen Meters, 0 to 14 pH
From AUD 34.90 (Ex GST)
Fluoride Sensor, Replacement Sensor with 0.3 mL Direct Measurement
AUD 227.70(Ex GST)
Multi Function Soil Meters with Stem Probes
From AUD 24.90 (Ex GST)
Nitrate Ion Electrode, Replacement Sensor with Selective Flat Electrode
AUD 227.70(Ex GST)
Pocket Ionized Calcium Meter, Cow Side Blood Testing with 0.3 mL Sample Volume
AUD 2,183.50(Ex GST)
Pocket Nitrate Ion Meter, 0.3 mL Sample Testing with Up to 2 Calibration Points
AUD 1,314.50(Ex GST)
Pocket Nitrate Ion Meter, Single-Drop On-Site Testing
AUD 764.50(Ex GST)
Save 10%
Portable Multi-Parameter Meters for pH, Conductivity and Dissolved Oxygen Testing
From AUD 1,723.50 (Ex GST)
Save 10%
Portable Single Parameters for pH, ORP, Conductivity and DO Testing
From AUD 1,435.50 (Ex GST)
Salt EC Sensor, 0.12 mL Sample Testing with Ti/Pt Black Cell
AUD 143.00(Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Petri Dishes, Polypropylene, Autoclavable & Reusable, High Quality
From AUD 1.20 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From AUD 3.90 (Ex GST)
Laboratory Beaker, Low Form, Graduated with Spout, Borosilicate Glass (BORO 3.3)
From AUD 2.00 (Ex GST)
LATEST PRODUCTS
TOP RATED PRODUCTS
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab