Nylon Pulleys, Lightweight Laboratory Model
From $15.00 (Ex GST)
- 50 mm nylon pulley range for mechanics experiments, supports cord redirection, load lifting studies and pulley system demonstrations
- Sheave frame options include 1 to 4 sheaves with pressed aluminium frames, strong hooks, silversteel shafts, screws and nuts for repair
- Bench mount horizontal pulley clamps to flat surfaces, max clamp thickness 25 mm, protective pad helps prevent bench damage
- Vertical adjustable pulley uses universal bench clamp opening to 40 mm, holds devices up to 12.5 mm diameter, pulley can be positioned and directed
- Pulley on anodised aluminium rod options use 8 mm x 200 mm rods, straight or bent with offset groove alignment for consistent cord path
- Description
Description
Pulley options for mechanics demonstrations using 50 mm diameter moulded nylon pulleys. Configurations include pulley in sheave frames with hooks in 1, 2, 3, or 4 sheave versions, bench mounting horizontal pulley clamps for tabletop cord routing, a vertical adjustable pulley assembly with a universal bench clamp, and pulley on anodised aluminium rod versions in straight or bent offset formats for bench clamp or retort stand and boss head mounting. Construction details include pressed aluminium sheave frames, silversteel shafts in sheave assemblies, and specified clamp openings where provided.
Pulley in sheave with 50 mm diameter moulded nylon pulley running on a silversteel shaft. Frames or sheaves are pressed aluminium and the hook at each end is described as very strong. Sheaves are held together with screws and nuts so they can be repaired or modified by the instructor. Background note provided states the design dates back to the 1960s and has changed over time, with earlier versions machined and cast in aluminium.
Pulley in sheave with 50 mm diameter moulded nylon pulleys running on a silversteel shaft. Frames or sheaves are pressed aluminium and the hook at each end is described as very strong. Sheaves are held together with screws and nuts so they can be repaired or modified by the instructor. Background note provided states the design dates back to the 1960s and has changed over time, with earlier versions machined and cast in aluminium.
Pulley in sheave with 50 mm diameter moulded nylon pulleys running on a silversteel shaft. Frames or sheaves are pressed aluminium and the hook at each end is described as very strong. Sheaves are held together with screws and nuts so they can be repaired or modified by the instructor. Background note provided states the design dates back to the 1960s and has changed over time, with earlier versions machined and cast in aluminium.
Pulley in sheave with 50 mm diameter moulded nylon pulleys running on a silversteel shaft. Frames or sheaves are pressed aluminium and the hook at each end is described as very strong. Sheaves are held together with screws and nuts so they can be repaired or modified by the instructor. Background note provided states the design dates back to the 1960s and has changed over time, with earlier versions machined and cast in aluminium.
50 mm diameter nylon pulley mounted on a strong aluminium frame for clamping to a bench top or flat surface. Maximum clamping thickness is 25 mm. When clamped, side of the pulley is parallel to the bench surface. Clamp screw has a protective pad on the tip to help prevent bench damage. Described use is taking a cord close to the table top and passing the cord back over the table top.
Vertical adjustable pulley assembly combining a pulley on bent rod LC-80-MF2600-020 with a bench clamp LC-80-MF0858-001. Pulley on bent rod can be raised high or slid down in the clamp to be level with the table top and can be pointed in any direction. Universal bench clamp opens to 40 mm and can hold devices up to 12.5 mm diameter either vertically or horizontally. Note states the two pulley on rod versions can be obtained separately from the bench clamp.
Pulley on rod straight type for holding by bench clamp LB0858-001 or by a retort stand and boss head. 50 mm diameter nylon pulley fixed to end of an 8 mm diameter aluminium anodised rod, 200 mm long. Rod is straight in one plane, and edgeways the rod is offset so pulley groove is in line with the rod.see also LC-80-MF2600-020 for pulley on bent rod.
Pulley on rod bent type for holding by a bench clamp or by a retort stand and boss head. 50 mm diameter nylon pulley fixed to end of an 8 mm diameter aluminium anodised rod, 200 mm long. Rod is bent in one plane and edgeways the rod is offset so pulley groove is in line with the rod.see also LC-80-MF2600-001 for pulley on straight rod.
Similar Products
Flat Bottom Flask Two Neck Jointed, BORO 3.3 Glass
From $19.90 (Ex GST)
Erlenmeyer Conical Flask, Narrow Neck, Borosilicate Glass (BORO 3.3)
From $2.90 (Ex GST)
Thistle Funnel, BORO 3.3 Glass
$8.40(Ex GST)
Air Track End Plug for Track Tube
$4.40(Ex GST)
Simple Copper–Constantan Thermocouple, 200 mm Length
$8.00(Ex GST)
Banana Plugs, 4mm Laboratory Type
From $11.30 (Ex GST)
Adjustable Inclined Plane with Pulley and Angle Scale
From $110.30 (Ex GST)
12 V DC Electric Kinetic Theory Model Apparatus
$292.00(Ex GST)
Adjustable Inclined Plane with Pulley and Angle Scale
From $110.30 (Ex GST)
Air Track Systems, Low Friction Linear Motion Type
From $200.00 (Ex GST)
ASEP Powder-Coated Stream Tray
$218.40(Ex GST)
Boyle’s Law Apparatus, Pressure Volume Demonstration Unit
From $55.00 (Ex GST)
Brass Slotted Weights, Precision Calibration Type
From $3.90 (Ex GST)
Circular Motion Kits, Speed Control Teaching Model
From $26.30 (Ex GST)
Constant-Volume Thermometer for Charles’ Law Demonstrations ,1m
$219.00(Ex GST)
Dynamics Carts, Laboratory Collision and Motion Kit
From $143.00 (Ex GST)
Large Demonstration Manometer, ±300 mm Range
$126.00(Ex GST)
PSSC 2D Collision Dynamics Practical Kit
$41.00(Ex GST)
PSSC Helical Steel Spring Kit
$70.00(Ex GST)
Scale Pans, Laboratory Weighing Unit
From $6.30 (Ex GST)
Steel Ball Set, 3 Sizes, 20 Balls per Size
$34.00(Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From $3.90 (Ex GST)
Boss Head Clamp for Lab Stands, Powder Coated, Heavy-Duty
From $6.50 (Ex GST)
LATEST PRODUCTS
Siren Disc, Lab Sound Apparatus
From $7.50 (Ex GST)
TOP RATED PRODUCTS
Siren Disc, Lab Sound Apparatus
From $7.50 (Ex GST)
Our Reviews
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab