PVDF Syringe Filters, Hydrophilic and Hydrophobic Membrane Filtration Range
From AUD 115.90 (Ex GST)
From AUD 115.90 (Ex GST)
- PVDF syringe filters for laboratory filtration use
- Available in hydrophilic and hydrophobic PVDF membrane options
- Pore sizes listed as 0.22 µm and 0.45 µm
- Filter diameters listed as 25 mm OD and 33 mm OD
- Pack sizes include 50 pieces and 100 pieces
- Suitable for compatible liquid sample clarification
- Useful for routine laboratory, research and educational workflows
- Hydrophilic PVDF options support compatible aqueous filtration methods
- Hydrophobic PVDF options support compatible non-aqueous or venting applications where suitable
- Confirm solvent and sample compatibility before use
- Sterility status is not specified
- Use under appropriate laboratory or educational supervision
[request_quote_button]
- Description
Description
The PVDF Syringe Filters, also known as polyvinylidene fluoride syringe filters or disposable membrane syringe filters, are designed for compatible sample filtration, clarification and particulate removal in laboratory workflows. These syringe filters are available in hydrophilic PVDF and hydrophobic PVDF membrane options, allowing users to select the correct filter type according to the sample, solvent system and filtration method. Available pore sizes include 0.22 µm and 0.45 µm, supporting common laboratory filtration tasks where fine particulate retention or routine sample clean-up is required.
The listed filter diameters include 25 mm OD and 33 mm OD, with pack sizes of 50 pieces or 100 pieces depending on the selected option. Hydrophilic PVDF filters are generally selected for compatible aqueous and polar sample workflows, while hydrophobic PVDF filters are selected where the method requires a hydrophobic membrane. Users should confirm compatibility with the exact solvent and application before use. These filters are suitable for laboratory and educational settings where disposable syringe filtration is required for compatible samples, reagents or preparation work.
Users should confirm membrane type, pore size, filter diameter, pack size, sterility requirement, housing compatibility, syringe connection, solvent compatibility and maximum pressure suitability before ordering or use. Sterility is not specified, so these filters should not be used for sterile filtration, cell culture, clinical, diagnostic or microbiology-critical workflows unless the correct sterile product is confirmed. Do not exceed the pressure rating of the filter or syringe assembly. Excess pressure may cause leakage, filter failure or sudden sample discharge.
Handle hazardous, biological, acidic, alkaline or solvent-based samples according to approved PPE, ventilation and disposal procedures.
This product is intended for laboratory or educational settings only and should be used under appropriate supervision. This item is supplied as the selected PVDF syringe filters only. Syringes, needles, sample vials, collection tubes, pumps, PPE and additional filtration accessories are not included unless specified separately.
LabChoice Australia supplies PVDF Syringe Filters and laboratory filtration consumables for school laboratories, university teaching laboratories, research facilities, sample preparation areas and general laboratory environments requiring practical disposable membrane filtration tools.
General Electromagnetic Spectrum Chart, 61 × 85 cm
AUD 112.50(Ex GST)
Retort Ring, Stainless Steel with Attached Bosshead, Rust-Resistant, High Quality
From AUD 8.90 (Ex GST)
3-Shelf Laboratory Trolley, Aluminium Frame, Polypropylene Shelves
AUD 190.90(Ex GST)
Universal Rack, High-Speed Container Clamping
From AUD 481.00 (Ex GST)
pH Tester Kit PH20 with ATC for Water Testing, 0 to 14.0 pH
AUD 129.00(Ex GST)
Glass Low Form Beaker BORO 3.3 Size 400 ML – 6 Pcs/Box
AUD 30.60(Ex GST)
Burette Clamp, Fisher Type, Powder Coated Steel, Single/ Double - Single
From AUD 6.90 (Ex GST)
Baumé Hydrometer Brannan for Measuring Liquids Heavier than Water
From AUD 78.90 (Ex GST)
Snap Ring Chromatography Vials, BORO 3.3
From AUD 21.50 (Ex GST)
You May Also Need
Filter Membrane MCE, 0.22–0.45 µm, Pack of 200
From AUD 74.90 (Ex GST)
Filter Membrane Nylon, 0.22 µm & 0.45 µm Pack of 200
From AUD 118.50 (Ex GST)
Filter Membrane PTFE Hydrophilic, Pack of 100
From AUD 118.50 (Ex GST)
Filter Paper, High-Quality, Fast Filtration & Superior Retention (Pack of 100 sheet)
From AUD 8.50 (Ex GST)
Glass Fibre Membrane Filters, 47 mm, 0.45 µm, Pack of 50
AUD 80.90(Ex GST)
Glass Filter Holder Base, 47 mm with Sintered Support, BORO 3.3
AUD 229.90(Ex GST)
MCE Syringe Filters, Mixed Cellulose Ester Laboratory Filtration Range
From AUD 115.90 (Ex GST)
Nylon Syringe Filters, Multi Size Laboratory Filtration Range
From AUD 80.90 (Ex GST)
PES Syringe Filters, Polyethersulfone Laboratory Filtration Range
From AUD 80.90 (Ex GST)
PTFE Syringe Filters, Hydrophilic and Hydrophobic
From AUD 80.90 (Ex GST)
[porto_related_products_slider]
Recently Viewed Products
SELECT OPTIONS
Inoculating Loops, 3 mm, Ni/Cr Wire, Pack of 10
AUD 14.90(Ex GST)
SELECT OPTIONS
Separating Funnel Kit PTFE Stopcock with SS Retort Ring, BORO 3.3 Glass
From AUD 69.90 (Ex GST)
SELECT OPTIONS
Conductivity Electrodes, Stainless Steel Type
From AUD 49.90 (Ex GST)
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Petri Dishes, Polypropylene, Autoclavable & Reusable, High Quality
From AUD 1.20 (Ex GST)
Stirring Rods, Rounded Ends, Laboratory Grade, Borosilicate Glass (BORO 3.3)
From AUD 0.95 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From AUD 3.90 (Ex GST)
TOP RATED PRODUCTS
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab