Glass Blowing Tube, BORO 3.3, 14 mm OD with 1.5 mm Wall Thickness
From AUD 15.00 (Ex GST)
From AUD 15.00 (Ex GST)
- Glass blowing tube for laboratory and educational glassworking
- Made from borosilicate glass as listed
- Outer diameter listed as 14 mm
- Wall thickness listed as 1.5 mm
- Suitable for compatible glassblowing and glassworking applications
- Useful for heating, shaping, forming and manipulation practice
- Designed for laboratory, scientific and educational use
- Approximate tube length variation listed as ±2 cm
- Practical tubing for school, university and preparation-room work
- Confirm final length, OD and wall thickness before ordering
- Heated glass can cause serious burns
- Use under appropriate laboratory or educational supervision
[request_quote_button]
- Description
Description
The Glass Blowing Tube, Borosilicate Glass, 14 mm OD, also known as borosilicate glass tubing for glassblowing, is designed for compatible laboratory glassworking, shaping and educational demonstration work. This tube is made from borosilicate glass and has a listed outside diameter of 14 mm, making it suitable for approved glassblowing techniques where controlled heating and forming are required. The wall thickness is listed as 1.5 mm, supporting suitable manipulation, bending, shaping and forming work under the correct glassworking conditions. The tubing can be used in laboratory glassworking, educational demonstrations, scientific preparation work and compatible glass tube forming applications.
The lengths of tubing are listed as approximate, with a ±2 cm variation on length, so users should confirm the required finished length before ordering for size-critical applications. Users should confirm tube length, outside diameter, wall thickness, heating method, flame compatibility, cutting method, annealing requirements and glassworking procedure before use. Glassblowing involves high temperatures, flame and hot glass. Heated glass may look cool but can still cause severe burns. Use suitable eye protection, heat-resistant tools, ventilation and approved glassworking procedures.
Do not use with hazardous fumes, incompatible chemicals or pressure applications unless the complete setup has been assessed and approved. This product is intended for laboratory or educational settings only and should be used under appropriate supervision. This item is supplied as the selected 14 mm OD borosilicate glass blowing tube only. Burner, torch, gas supply, annealing equipment, glass cutter, PPE, stands, clamps and additional glassworking accessories are not included unless specified separately.
LabChoice Australia supplies Borosilicate Glass Blowing Tubes and laboratory glassware accessories for school science laboratories, university teaching laboratories, research facilities and educational laboratories requiring practical tubing for glassworking and demonstration use.
| Item Code | Size | Pack |
|---|---|---|
| LC-07-GBT1741-14 | 250 mm | 10 pcs |
| LC-07-GBT1742-14 | 250 mm | 20 pcs |
| LC-07-GBT1743-14 | 500 mm | 10 pcs |
| LC-07-GBT1744-14 | 500 mm | 20 pcs |
| LC-07-GBT1745-14 | 750 mm | 10 pcs |
| LC-07-GBT1746-14 | 750 mm | 20 pcs |
Air Track Old Style Brass Glider Weights
From AUD 13.90 (Ex GST)
Bunsen Burner for Natural Gas & LPG, Adjustable Flame Laboratory Burner
From AUD 20.00 (Ex GST)
Burette Cleaning Brush for Laboratory Glassware
From AUD 12.90 (Ex GST)
Hofmann Voltameter Spare Platinum Electrodes, Pair
AUD 114.90(Ex GST)
LCD High-Speed Mini Centrifuge with 12-Place for 2 ML Tubes, up to 15,000 rpm
AUD 1,510.00(Ex GST)
Alnico Cylinder Magnets for Magnetism and Induction Experiments
From AUD 14.90 (Ex GST)
General Sound Spectrum Wall Chart, 55 × 86 cm
AUD 99.90(Ex GST)
Double Hooked Weight Calibration Set, 10 g to 1000 g
AUD 124.50(Ex GST)
Variable Speed Vortex Mixer, up to 2700 rpm
AUD 542.00(Ex GST)
You May Also Need
Save 23%
Air Condenser Borosilicate Glass BORO 3.3 Laboratory Grade
From AUD 19.90 (Ex GST)
Davies Double Surface Condenser BORO 3.3 for Efficient Reflux
From AUD 64.90 (Ex GST)
Dimroth Coil Condenser BORO 3.3 Borosilicate Glass
From AUD 70.90 (Ex GST)
Dropping Funnel, Cylindrical, Ungraduated, Glass Stopcock, BORO 3.3 Glass
From AUD 32.90 (Ex GST)
Glass Low Form Beaker BORO 3.3 Size 10 ML – 10 Pcs/Box
AUD 20.10(Ex GST)
Graham Coil Condenser BORO 3.3 Borosilicate Glass for Efficient Reflux
From AUD 44.90 (Ex GST)
Special Price
Hempel Distillation Column Plain BORO 3.3 Borosilicate Glass
From AUD 24.90 (Ex GST)
Jacketed Coil Condenser BORO 3.3 Chemistry Grade
From AUD 137.90 (Ex GST)
Measuring Cylinder Class A, Interchangeable Stopper, Round Base, Borosilicate Glass (BORO 3.3)
From AUD 28.50 (Ex GST)
Stirring Rods, Rounded Ends, Laboratory Grade, Borosilicate Glass (BORO 3.3)
From AUD 0.95 (Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Petri Dishes, Polypropylene, Autoclavable & Reusable, High Quality
From AUD 1.20 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From AUD 3.90 (Ex GST)
Reagent Bottles, Wide Mouth, HDPE, Chemical-Resistant, Highly Reliable & Durable - Each
From AUD 1.50 (Ex GST)
LATEST PRODUCTS
Polypropylene Funnel for Liquid Transfer
From AUD 22.90 (Ex GST)
Double-Sided Polished Discs, 9.5 mm Thick
From AUD 13.90 (Ex GST)
TOP RATED PRODUCTS
Polypropylene Funnel for Liquid Transfer
From AUD 22.90 (Ex GST)
Double-Sided Polished Discs, 9.5 mm Thick
From AUD 13.90 (Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab