E
x
p
l
o
r
e
M
o
r
e
:
Parts & Accessories
Air Track Coil Springs for SHM Experiments
From AUD 4.90 (Ex GST)
From AUD 4.90 (Ex GST)
- Coil spring accessories for compatible air track gliders
- Available in 300 mm and 60 mm length options
- 300 mm coil spring is designed for simple harmonic motion experiments
- 60 mm coil spring is designed to join gliders together
- Supports SHM system setup with compatible air track gliders
- Useful for motion, oscillation and dynamics demonstrations
- Practical spare or replacement spring for air track setups
- Suitable for school, university and teaching laboratory use
- Helps demonstrate restoring force and periodic motion behaviour
- Confirm glider attachment compatibility before ordering
- Coil spring only, gliders and air track are not included
- Use under appropriate laboratory or educational supervision
[request_quote_button]
- Description
Description
The Air Track Coil Springs for SHM Experiments, also known as air track glider springs, are designed for compatible air track gliders used in simple harmonic motion and dynamics experiments. The 300 mm coil spring is intended for glider motion experiments involving simple harmonic motion, allowing students to observe oscillation behaviour under approved low-friction conditions. The 60 mm coil spring is designed to join compatible gliders together to form an SHM system, supporting demonstrations where connected gliders move as part of a spring-coupled setup.
These springs are useful for lessons covering simple harmonic motion, restoring force, oscillation, displacement, velocity, acceleration, energy transfer and air track-based dynamics. Users should confirm the air track model, glider type, spring length, attachment method, spring holder compatibility and experiment requirement before ordering or use. The coil spring should be inspected before each activity. Do not use if it is overstretched, bent, corroded, loose or damaged.
Keep hands, loose clothing and fragile items clear of moving gliders and tensioned springs during air track operation. This product is intended for laboratory or educational settings only and should be used under appropriate teacher or laboratory supervision. This item is supplied as the selected air track coil spring only. Air track, gliders, spring holders, blower, timers, photogates, spark pens, paper track and additional air track accessories are not included unless specified separately.
LabChoice Australia supplies Air Track Coil Springs and spare parts for school science laboratories, physics classrooms, university teaching laboratories and STEM programs requiring practical components for SHM, oscillation and motion experiments.
Complete Circuits Kit with Wire Card and Accessories (ASEP)
AUD 64.90(Ex GST)
Advanced Resonance Apparatus with 1 m Vertical Scale Included
AUD 232.90(Ex GST)
Warming Trays
From AUD 1,254.00 (Ex GST)
Aluminium Caps for Crimp Top Chromatography Vials
From AUD 29.50 (Ex GST)
Brass Slotted Weight Sets for IEC Weight Carriers
From AUD 14.90 (Ex GST)
Vernier Calipers For Laboratory and Educational Work
From AUD 9.90 (Ex GST)
Glass U-Form Plain Drying Tubes, BORO 3.3
From AUD 6.50 (Ex GST)
Tube Rotator for Sample Blood mixing, 0 to 80rpm
AUD 612.50(Ex GST)
You May Also Need
Air Table Bronze Bumper Wires
From AUD 6.90 (Ex GST)
Air Track Air Inlet End Cap, Triangular Plastic
AUD 14.50(Ex GST)
Air Track Attachment Screws, Accessory
From AUD 2.50 (Ex GST)
Air Track End Plug for Track Tube
AUD 5.50(Ex GST)
Air Track Foot Support for Spark and Paper Tracks
AUD 13.90(Ex GST)
Air Track Installation & User Manual
From AUD 6.90 (Ex GST)
Air Track Non-Elastic Velcro Buffer Pair
AUD 12.50(Ex GST)
Air Track Over-Track Photogate with Leg Supports
AUD 170.50(Ex GST)
Air Track Plastic Inclination Block Set (4 Pieces)
AUD 8.90(Ex GST)
Air Track Spark Track Paper Guides
From AUD 87.50 (Ex GST)
Alligator Clips, 4 mm Banana Plug Shank, Pack of 10
From AUD 15.90 (Ex GST)
Boyle’s Law High Pressure Spare Glass Tubes
From AUD 34.90 (Ex GST)
Brass Filter Pump with Non-Return Valve
From AUD 77.50 (Ex GST)
Deflagrating Spoons with Aluminium Cap
From AUD 16.50 (Ex GST)
Support Rack for Radiation Source and Absorber Alignment
AUD 46.90(Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From AUD 3.90 (Ex GST)
Reagent Bottles, Wide Mouth, HDPE, Chemical-Resistant, Highly Reliable & Durable - Each
From AUD 1.50 (Ex GST)
Petri Dishes, Polypropylene, Autoclavable & Reusable, High Quality
From AUD 1.20 (Ex GST)
LATEST PRODUCTS
Electronic Freezer / Fridge Thermometer with Alarm, -50°C to +70°C
AUD 52.50(Ex GST)
Boyle’s Law High Pressure Air Pump, Plastic
AUD 52.90(Ex GST)
Boyle’s Law High Pressure Pressure Pot Complete
AUD 55.90(Ex GST)
TOP RATED PRODUCTS
Electronic Freezer / Fridge Thermometer with Alarm, -50°C to +70°C
AUD 52.50(Ex GST)
Boyle’s Law High Pressure Air Pump, Plastic
AUD 52.90(Ex GST)
Boyle’s Law High Pressure Pressure Pot Complete
AUD 55.90(Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab