Materials: Aluminium
LCD Digital Glass Ceramic Hotplate with Package, 10 Inch and Heating Temperature up to 500°C
$1,204.00(Ex GST)
- 10-inch glass ceramic work plate provides excellent chemical resistance and efficient heat transfer
- Heating range from room temperature to 500°C in 1°C increments for high-temperature sample preparation
- LCD display shows temperature and timer settings for clear routine operation
- PT1000 external temperature sensor supports sample temperature control with ±0.2°C sensor accuracy
- HOT warning flashes when the work plate temperature is above 50°C, even after the hotplate is turned off
- Timer function from 1 minute to 99 hours 59 minutes supports controlled heating procedures
- SD card data recording supports real-time recording of instrument running data
- Description
Description
LCD Digital Glass Ceramic Hotplate with Package, also known as a laboratory glass ceramic hotplate, is designed for controlled high-temperature heating in analytical, environmental, mineral processing, metallurgical, petrochemical, materials science, battery research and university laboratory workflows. Its 10-inch glass ceramic work plate provides a large heating surface with strong chemical-resistant performance and efficient heat transfer.
The hotplate provides a heating temperature range from room temperature to 500°C, adjustable in 1°C increments. This supports demanding laboratory heating tasks such as high-boiling acid digestion of mineral samples, preparation of inorganic materials, nanomaterial processing, rapid solvent removal, sample drying and pre-treatment before analytical testing.
The 254 × 254 mm glass ceramic work plate offers a practical surface for one heating position. Glass ceramic construction supports chemical resistance and stable heat transfer during routine heating procedures, especially where acids, solvents or corrosive sample preparation workflows are used with suitable laboratory vessels.
The LCD display provides clear visibility of temperature and time settings. Temperature display accuracy is specified at ±0.1°C, while temperature control accuracy is specified as ±1°C below 100°C and ±1% above 100°C. These specifications support controlled heating where stable temperature management is required.
External temperature control is possible by connecting a PT1000 temperature sensor. The supplied sensor accuracy is ±0.2°C, allowing direct monitoring and control of sample temperature rather than relying only on work plate temperature. This is useful for liquid heating, digestion workflows and temperature-sensitive sample preparation.
The HOT warning function flashes when the work plate temperature is above 50°C, even when the hotplate is turned off. Overheating temperature protection is specified at 540°C, supporting safer operation during high-temperature laboratory heating tasks.
The timer can be set from 1 minute to 99 hours 59 minutes, supporting timed heating, drying, concentration and digestion workflows. The SD card data connector records the instrument’s running data in real time, supporting traceability and process review in research, QC and analytical laboratories.
Typical applications include high-boiling acid digestion of minerals, preparation of nanomaterials and inorganic materials, sample ashing and heating of metal catalysts, rapid removal of high-boiling solvents, rapid sample concentration, sample drying, analytical sample pre-treatment, environmental water sample pre-treatment, soil sample pre-treatment and pollutant sample preparation.
LabChoice Australia supplies this LCD Digital Hotplate for mineral processing laboratories, metallurgical R&D laboratories, environmental monitoring stations, soil and water pollutant testing laboratories, petrochemical research laboratories, functional materials laboratories, battery electrode materials laboratories, university research laboratories and industrial quality-control facilities.
| Specification | Details |
|---|---|
| Work plate Dimension | 254×254 mm (10 inch) |
| Work plate material | Glass ceramic |
| Heating temperature range | Room Temp.-500℃, increment 1℃ |
| Temperature display | LCD |
| Temperature control accuracy | ±1℃ (<100℃) ± 1% (>100℃) |
| Time display | LCD |
| Temperature display accuracy | ±0.1℃ |
| External temperature sensor | PT1000 (±0.2℃) |
| Overheating temperature protection | 540℃ |
| Overheating temperature protection | 540℃ |
| Heating position | 1 |
| Timer function | 1 min – 99 h 59 min |
| Protection class | IP20 |
| Power | 1700 W |
| Heating output | 1500 W |
| Voltage, Frequency | 100-120V/200-240V，50/60Hz |
| Dimension [WxDxH] | 328x424x138 mm |
| Weight | 7.2 kg |
| Permissible ambient temperature | 5-40℃ |
| Permissible ambient humidity | 80% RH |
Frequently Bought Together
LED Magnetic Hotplate Stirrer Package, 5L Capacity
$650.00(Ex GST)
LCD Digital Magnetic Hotplate Stirrer for 5L Heating
$765.00(Ex GST)
Magnetic Stirrer Hotplate IKA C-Mag HS10, up to 15 L Capacity
$2,894.00(Ex GST)
ASEP Small Motor and Generator Kit with Pulley Included
$72.50(Ex GST)
Separating Funnel Kit Polypropylene with Stopcock, High Quality
From $49.90 (Ex GST)
Medium Orbital Shaker Analogue
$2,062.00(Ex GST)
Snap-in Universal top plate for Digital Vortex Mixer
$44.50(Ex GST)
Air Track Non-Elastic Velcro Buffer Set (Pair)x
$12.50(Ex GST)
Microplate Vortexer Medium - Hold up to 4 x 96 well microtiter plates
$1,600.00(Ex GST)
Hipipette Adjustable 12-Channel Manual Pipette, Fully Autoclavable and Colour-Coded
From $980.50 (Ex GST)
Test Tube Racks, Polypropylene 90 Hole Laboratory Type
From $8.90 (Ex GST)
Brass Bar with Expansion Gauge and Insulated Handle
$47.50(Ex GST)
Air Track Gliders, Low Friction Motion Type
From $32.90 (Ex GST)
Similar Products
Block for Cuvettes
$392.00(Ex GST)
Digital Laboratory Water bath, 7 L to 50 L with Heating Temperature Control
From $2,067.00 (Ex GST)
Digital Orbital Shaker
From $3,080.00 (Ex GST)
Humidity Measurement Instruments For Laboratory
From $12.50 (Ex GST)
Hybridisation Oven Carousel Suit
From $1,216.00 (Ex GST)
Immersion Cooler
$5,749.00(Ex GST)
Laboratory Dry Bath Incubator
$976.50(Ex GST)
Medium Reciprocating Shaker
$3,640.00(Ex GST)
Medium Rotary Mixer
$3,333.00(Ex GST)
Micro Tray Block
From $308.00 (Ex GST)
Mini Magnetic Stirrer, 1L and 2L Capacity , Brushless Motor
From $99.90 (Ex GST)
Rotary Tube Mixer with Disc
$1,439.00(Ex GST)
Simmerstat Control with Combined Hot Plates & Magnetic Stirrer
From $835.90 (Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Polypropylene Filter Funnels, Gravity Filtration Range
From $1.50 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From $3.90 (Ex GST)
LATEST PRODUCTS
TOP RATED PRODUCTS
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab