E
x
p
l
o
r
e
M
o
r
e
:
Electrochemistry Meters & Analysers
Conductivity Tester Kit EC20 Pocket Tester for EC Water Testing, 0 to 20.00 mS/cm
AUD 129.00(Ex GST)
AUD 129.00(Ex GST)
- Value pocket conductivity tester kit suitable for routine EC water testing where a simple handheld meter is preferred
- Practical choice for hydroponics, education, tap water, drinking water, swimming pools and water treatment checks
- Helps users manage regular conductivity testing with a compact kit format for bench, field or classroom use
- Suitable for customers needing an economical EC tester for low to moderate conductivity water-solution workflows
- Ready-to-use kit format helps reduce the need to separately source basic setup accessories
- Designed for routine users who need portable conductivity testing with simple daily operation
[request_quote_button]
- Description
- Datasheets & Manuals
Description
Conductivity Tester Kit EC20 Value Pocket for EC Water Testing, 0 to 20.00 mS/cm, also known as a pocket EC tester kit, is designed for routine conductivity testing in regular water-solution workflows. This kit is suitable for hydroponics, education, tap water, drinking water, swimming pools, water treatment and general water-quality checks where a compact handheld conductivity tester is preferred.
The EC20 uses a BPB Brush-Resistant Platinum Black sensor, which is designed to minimise electrode polarisation, expand the measuring range and improve consistency compared with traditional stainless steel electrode designs. This supports practical EC measurement across low to moderate conductivity samples.
The tester provides EC and temperature display on a large clear screen with a 180° viewing angle. Stable reading indicators, completed calibration indicators, self-diagnosis warnings and calibration reminders help support routine operation during daily testing. The IP67 waterproof and dustproof body is suitable for wet testing environments, and the tester can float if dropped into water. AAA battery operation, low battery warning and auto power-off support portable use in field, pool, hydroponic and classroom workflows.
Included with this Conductivity Tester Kit: EC20 Conductivity Tester, Calibration Solutions, AAA Batteries, Lanyard and Portable Carrying Case.
Users should follow the correct calibration, rinsing, sensor cleaning and storage procedure to support stable readings and electrode service life. Sample conductivity range, calibration solution choice and final calibration-point specification should be confirmed before regular testing.
LabChoice Australia supplies Conductivity Tester Kits for schools, universities, hydroponic users, pool testing users, water treatment teams and routine water-quality testing workflows.
Features
- EC20 pocket conductivity tester kit
- Conductivity measuring range: 0 to 200.0 µS/cm
- Conductivity measuring range: 0 to 2000 µS/cm
- Conductivity measuring range: 0 to 20.00 mS/cm
- Temperature measuring range: 0 to 50.0°C
- Conductivity accuracy: ±1% F.S.
- Temperature accuracy: ±0.5°C
- Automatic temperature compensation: 0 to 50°C
- Automatic calibration with buffer recognition
- Supplied information mentions up to 2-point auto calibration in one section and 3-point auto calibration in another section; final calibration specification should be confirmed before publishing
- BPB Brush-Resistant Platinum Black sensor
- Sensor designed to minimise electrode polarisation
- Wide-range EC measurement support
- Easy-to-clean electrode design
- Large clear display
- 180° viewing angle screen
- Temperature and EC dual display
- Completed calibration indication
- Stable reading indication
- Self-diagnosis function
- Out-of-range warning
- Low battery warning
- Incorrect calibration reminder
- IP67 waterproof and dustproof design
- Floats on water
- AAA battery powered
- 1000 hours continuous operation listed in supplied information
- Auto power-off after 8 minutes without operation
- Calibration solutions included
- AAA batteries included
- Lanyard included
- Portable carrying case included
Warranty
The instrument is covered for defects in material and workmanship for two years, while the probe is covered for six months from delivery, subject to the manufacturer’s warranty terms.
The limited warranty does not cover issues caused by accidental damage, improper use, normal wear and tear, transport, storage, failure to follow product instructions, unauthorised maintenance, unauthorised modification, unauthorised repair, incompatible use with other products or materials, abuse, accidents or external causes beyond reasonable control.
| Meter’s Technical Specs | ||
|---|---|---|
| Conductivity | Range | 0 to 20.00 mS/cm:
(0 to 199.9 µS/cm); (200 to 1999 µS/cm); (2.00 to 19.99 mS/cm) |
| Resolution | 0.1/1 μS/cm, 0.01 mS/cm | |
| Accuracy | ±1% F.S. | |
| Calibration Points | Automatic 1 to 2 points | |
| Temperature Compensation | Auto Temperature Compensation
0 to 50°C (32 to 122°F) |
|
| Temp | Range | 0 to 50°C (32 to 122°F) |
| Resolution | 0.1°C | |
| Accuracy | ±0.5°C | |
| LCD | 180° Viewing Angle LCD | |
| Stable Reading Indication | Smiley Face icon | |
| Low-Battery Warning | Battery icon flashing, reminder of battery replacement | |
| Self-Diagnosis | Yes | |
| Heads-Up Function | No | |
| Auto. Power-Off | Yes, auto power-off in 8 minutes without operation | |
| Waterproof Rating | IP67 | |
| Power | DC3V, AAA batteries*4 | |
| Battery Life | Continuous operation up to 1000 hours | |
| Dimensions& Weight | Tester: (40*31*178) mm/ 107g With case_(190*165*40) mm/ 438g | |
| Electrode’s Technical Specs | ||
| Application | Regular water solution testing, such as pools and spas, hydroponics, tap water, drinking water, water treatment, waste water treatment, aquaculture, etc. | |
| Type of Sensor | BPB (Brush-Resistant Platinum Black) | |
| Replaceable | No | |
| Temperature sensor | Yes | |
| Range | 0.1 μS to 20.00 mS | |
| Temperature Range | 0 to 50°C (32 to 122°F) |
Datasheets & Manuals
Document :
Product Information Sheet(Pdf)
Single Range Student Meters For Circuit
From AUD 43.90 (Ex GST)
Test Tubes Round Bottom, Rimless, Heat Resistant, BORO 3.3 Glass
From AUD 31.00 (Ex GST)
Low Power Simple Light Source, 2.5 V MES, 2 Wires
AUD 12.50(Ex GST)
Air Track Buffer Spring, Stainless Steel, with Screw
AUD 10.50(Ex GST)
Volumetric Transfer Pipette, Class A, BORO 3.3
From AUD 5.90 (Ex GST)
LED Digital Dry Bath with Fixed Block, up to 60°C
AUD 428.50(Ex GST)
Air Track Brass Glider Weights, Slotted Style
AUD 60.50(Ex GST)
You May Also Need
Conductivity Sensor, 0 µS/cm to 199.9 mS/cm Measurement Range
AUD 143.00(Ex GST)
Multi Function Soil Meters with Stem Probes
From AUD 24.90 (Ex GST)
pH Sensor, Replacement Flat Sensor for Pocket pH Meters
AUD 143.00(Ex GST)
Pocket Nitrate Ion Meter, Single-Drop On-Site Testing
AUD 764.50(Ex GST)
Save 10%
Pocket Testers for Portable Water Quality Testing
From AUD 290.50 (Ex GST)
Save 10%
Pocket Testers with Bluetooth for Portable pH, ORP and Water Testing
From AUD 397.50 (Ex GST)
Salt EC Sensor, 0.12 mL Sample Testing with Ti/Pt Black Cell
AUD 143.00(Ex GST)
Salt Electrode, Replacement Sensor with 0.01 to 25% Salt Range
AUD 227.70(Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Petri Dishes, Polypropylene, Autoclavable & Reusable, High Quality
From AUD 1.20 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From AUD 3.90 (Ex GST)
Laboratory Beaker, Low Form, Graduated with Spout, Borosilicate Glass (BORO 3.3)
From AUD 2.00 (Ex GST)
LATEST PRODUCTS
TOP RATED PRODUCTS
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab